DIY Press Brake for Harbor freight hydraulic 20 ton press
Вставка
- Опубліковано 10 чер 2024
- DIY Press Brake for Harbor Freight hydraulic 20 ton press is todays DIY on a tool to help with other DIYs , a hydraulic Press Brake . makes bending easy and they aren't that difficult to make
For Fishin N Stuff gear please visit link.below
if your looking for something not listed , leave a message
www.etsy.com/shop/PebsPrettyf... - Спорт
Best intro in a while. Superb editing. Dang. I really hope you remember me when you're big time, and let me hold that silver play button.....BAM! Great video! Like I've said before, I have no interest AT ALL in doing what you're doing in this video, but its captivating to watch in it entirety. You really put a lot of time and thought into making these videos and it shows.
Thank you Dieter, this one was tough I lost half my footage and had to be very creative on it . I appreciate the compliment but I think you'll have your silver play button before me , I've grew over a 1000 this month and your still out growing me , I watch your stuff too just can't comment lol
@@FishinNStuff how much time did a)you spend shooting, and b)did you spend editing that?
Maybe 3 days shooting but here lately it's been about 4 thousand degrees in my metal building so it's been taking longer , then I normally take a couple days to edit , I can exit faster but I do better taking my time , when I was transferring my footage to my external drive last weekend a bunch of it corrupted I guess cause I lost it . So I spent last week remaking it edited it Thursday and Friday
I could have got it done a little sooner I guess but I was already late so I tried ti make it good with what I had lol
@@FishinNStuff man I lost a ton of footage for one of my last videos when we were actually fishing. Had an imac that crapped the bed and left me hanging and lost those clips when I swapped back to a windows machine. Its aggravating, so great job pulling through that!
I want a souvenir from a super genius.
Nice, I watched the anchor video, and saw your buddies press brake, and I thought, I need to make one of those! This video popped up next! Tight lines bro.
Haha yeah me and you thought the same thing lol . Great minds think alike !!! I knew he had one and I've used real presses at work but till I needed one never really thought about it lol
You the man brother, love watching your DIY video's. Always fun, entertaining & knowledgeable. Thanks for sharing 👊✊👌👍🎣😎
Thank you for watching brother and for always commenting you just don't know what it means too me . It's encouraging to say the least
Bro your awesome & funny 👊👍🎣😎. Love to watch your video's. Also love the funny stuff & humor you put into your video's. Thanks for sharing.
Wow! That's was awesome! Love that DIY. I'm a Welder/Fabricator for a living so these interest me. May just have to try that myself.
Im an o.k. welder I don't do it every day but ive been certified in the past , I run a robot welder now for a living but I work in Fabrication, we make big truck parts
@@FishinNStuff that's cool man. We build service truck bodies like Duke Energy, Pike Electric, James River. Company trucks like that.
Small world ain't it lol hey brother i appreciate you watching and commenting . Thank you Sir
@@FishinNStuff yeah buddy not a problem! Love the videos!
Another great video my friend as always. I love the DIY stuff you do, thanks for sharing.🇺🇸
Thank for watching James I appreciate you brother
Nice work! I was a tool maker for 11 years! I can tell by your work your no rookie for sure. Everything is well thought out and neatly done! Great work! Not to mention that shop is so clean :)
My shop looks clean on camera lol . I guess it is but I never get it as clean as it once was . That's a huge compliment coming from a tool maker by the way thank you. Wer have tool and die where I work , but I'm not in it . I'm a welder Fabricator , but I've been in a lot of different departments the last 25 years I get bored and like learning something new
I love the fishing reel been looking for one forever nothing like custom made reels
Great video thank you for your time and knowledge.
Thank you for taking your time to watch man and then taking more time to comment I appreciate your support brother
Quality DIY video Keith. I love "Hey sailor" too
I like that song too , seen too work on this video lol . I appreciate you brother
Great video
Ok that was to long having no new videos to watch! Love watching your videos! Keep it up.... and more of them lol
Thank you brother I appreciate you watching and love it when you comment . Im sorry about the delay a few weeks ago I had a long gap in between videos cause my dad passed away . This one took me longer because I don't know how it happened but I lost half my video footage I took . It corrupted off something or I would have posted a lot sooner. I had to remake half of it and be very creative on my editing lol
@@FishinNStuff very sorry for your loss. Keep up the good work bud
Awesome, that turned out great.
Thank you brother I appreciate it
Very useful setup! It was nice to see ya smash the trash!
Haha I only bought those Decoolers to use on my kayak years ago , if you flip it you don't want to dump all your nice reels down to the bottom of the lake , that reel stopped working right a couple years ago I figured I'd make it useful lol .
Thank you
Thanks for the video, great job, and wow what a giveaway!
I was just joking around , I'll do a give away soon lol , haven't done one in a while .
nice video, thanks for sharing!
Thank you Sir I appreciate that and thank you for watching and taking the time to comment buddy
That's a great build!...I just need mine to be about 8 feet long
Why on earth are you crushing perfectly good reels...lol good video man
Thank you buddy I really appreciate you commenting, and those reels were actually broke already lol so I sent em out with a bang lol
After seeing those welds , I'll bet you do more grinding than a high school cheerleader ! 😂 Lol . Nice project 👍 ! Love all your videos
😯 LMBO
Good job! Real men make homemade tools.
Thank you Sir , our turned out good for a first try I might make some more for different applications. I appreciate you commenting means allot
U know u r my hero. 😆 u r the man keep it up
I don't know why but I appreciate it lol I appreciate you taking time to comment too brother
I laughed so hard! Thank you my man.
Lol thank you for watching brother
Nicely done on the DIY, that thing is slick! I don’t want the reel, I assume it’s already in the trash 🗑 🤣.
Thank you brother , no I kept it just in case lol .
Another Great video. All I have is a vice grips and a Swizz army knife. Thats it. Thats the lot. I'm a bit old in the tooth to start now. As much as I admire real men making stuff. I will carry on as I am. LOL.
Hey it takes a real man to make stuff with a vice grip and a swiss army knife hahaha , real men be like get me some duct tape I got this lol . I appreciate you brother your comments always make my day
Started watching this just to see what it was & ended up watching the whole thing. nice job. No thanks on the reel, my ex said I had too many already.
Lol that reel was broken any ways haha
Cool project. It looks like your having too much fun. LOL.
Hey you got to have fun buddy lol thank you for watching
3:06 “Ya that’s safe” haha good laugh man .. thanks for the video this is exactly what I need to make
Lol
I'd like it to shove into my brain so I don't have to listen to that music in the video,,, but other than that all your videos are AWESOME. Have enjoyed finding your channel
Well I'm sorry about the music lol . I appreciate you watching brother
Awesome video brother. I want the reel so I can say I’ve got something from the legend!!!!
No sir it didn't belong to Bill Dance it's just one of my old broken reels Haha, I appreciate it brother
😨😨😨😨 DID HE JUST CRUSH THAT REEL???? ...LOL... Brother you are a very very creative man bro... Great video and I think you should maybe start a business selling your inventions hay I'm just saying lol
Thank you brother , I would but I work all the time and I enjoy UA-cam in my spare time lol , ol and dont worry that reel was broken lol . Those Chinese reels dont tend to last so long ,
@@FishinNStuff 😂😂😂😂😂😂😂😂 those chinese reel dont last that long lol you got my side hurtin' brother! I remember one time i put one of those chinese specials on T pole thinking she dont care about all tht stuff etc brother the first time she cast with it she ssked me whats wrong with my pole i said what do you mean she said it wont reel the line back in 😳😬 turned out the knob to tighten the handle had completely fell out and wouldnt tighten at all...the reel was still on the rod but the handle was literally in her other hand 😆 i throw it away and didnt even bother with fixing it smh
Your going to need a bigger shop lol, Awesome giveaway lmao!
Sorry my sonny was logged in I guess , lol you right my shop is getting full , but I can't make new fishin stuff if I don't grow my tool collection Robert haha
I agree with the person below, this was too long between videos !! Another great video Keith 👍. Why do you buy them piece of junk reels ? LMAO 😂. Have a great weekend my friend
Im sorry I lost half my footage from making this DIY I felt a little sick on my stomach to say the least. I worked on it this past week and with some voice over and creativity I still got it made . I'll try to do better buddy lol I try to post every week but I would rather be late than sacrifice quality on the video I try and always improve you know
I am sorry it was a headache, but it turned out truly awesome 👍👍👍👍👍
The inside of the bottom die ( angle iron ) is curved. Add some strips of 16 gag. metal to the sides of the die so that the upper die can go to a full 90 deg.
That's a good idea if it's a bottom out die , where you have too bottom it out to get 90 deg , if I hit the bottom of my die its easy past 90 deg , plus you need a little radius in your bends so you don't make your corners weak . The only problem with having a bottom out die is didnt material thicknesses kind of change it and I never know what I'll be making next . But your right
Haha great giveaway 😂🤣 great video brother! See ya on the next one 😁
Thank you brother, ok and thank you for that shout out that was awesome buddy
@@FishinNStuff no problem at all! I appreciate your videos and want to see you grow as well! Keep 'em coming man!
Actually like the large handle on that reel
I do too . I saved the handle . The reel was already broken but it looked good
Great Video! I want to ask you what kind of welding machine do you use in this video and where did you get it. I am thinking of buying one. Thanks
I'm using a Miller millermatic 211
They are a little expensive but I haven't had 1 second of trouble out of it , those Vulcan welders at harbor freight gets some really good reviews
I'll help you any way I can buddy
Oh like when you crushed those reels lol😊
That was a cool bender👌I liked it..
Thanks for sharing😊Mahalo🤙🏽😊
Haha you got to have fun brother , I appreciate you watching man
you never stated what size was the shaft was or what it was made of. I'm attempting to build a break with no experience. Thanks....Keep up the Hacks Keith!!!!!
That would be awesome to put on display if you would autograph it for me
Great video, even though it wasn't my forte lol. Hey what brand spinning reel was that?
Which ones your favorite?
That was a L-Cheap-O brand spinning reel cost 10 bucks off Amazon
Next time you're at HF just get their $5 angle finder. I've used it for steel fab, suspensions etc. It's not digital but it gets the job done.
I will check that out buddy
that's a great weight for my heavier, maybe 8 n bait
Thank you brother
On the bottom die couldn't you just weld two pieces of 1/4" angle facing down and skip the middle angle facing up? Just curious. Great video
You can , ive seen all kinda bottom dies
I really don't see any reel standing up to that! But... Now that you have your new break I need a costom CB antenna bracket to go on the toolbox of my truck. Those online mounts are just as your said about the reels JUNK!!! If you're up to the task how do I contact you for description, measurements, pictures, etc. I have a couple of other things on my mind but that's for later and I'm also interested in one of your anchors. Great video, keep'em coming.
Heck I'll try man . Ive got another anchor idea I think will be pretty cool but I haven't had time to do it , too many irons in the fire I guess lol . Thank you brother
@@FishinNStuff thanks for the reply I'll get the measurements and send to to along with a photo to give you something to go by on the email you provided on your home channel, shipping shouldn't be much since we both are from NC. Heck find a place to put your logo on it so I can show show who made it as well. Thanks again....
Boy you brave, wearing them crocs with all that metal! Great video though!
Lol I get metal in my feet at work all the time wearing steel toes the only time I cover em up is when I'm welding , sometimes I don't then lol . Sometimes I just put a weld coat over my feet haha
Where did you get that 1” piece of steel for the top die?
Save the crushed reels for storytime and tell the story of the fish that destroyed the reel,.talk about the one that got away, you have a great channel ,keep up the good work
Lol I already threw that piece junk away haha , it wad already broke , I was just trying it out because it was so cheap and I thought it wad funny bit ppl were saying you could have gave that to a kid lol I ain't doing that no more lol , will i probably will lol . I appreciate you watching brother and thank you for taking the time to comment it means a whole lot brother
Someone asked about a square tubing bender... yes, it can be done. And you could easily build one with your setup/skills. Hit me up if ya wanna know more
Thank you brother, I just might do that I could see my DIYs coming ti that point to where I would need one . My New boat ive got ordered I don't really like SeaArks leaning post they put on they're boats , I love Rangers leaning post on they're RB190 bayboats but I called to order one and they are 1300 dollars not including tax and shipping after I got up off the floor I decided I would just build one for , I was thinking about making a video of it
I want to build one of those,,,??? so will it bend material to a full 90 degrees or does it depend on the thickness I'm guessing??
It will bend over 90 degrees, but you are right the material does matter . For thicker material you'll need a wider bottom and top I would think . And you only have 20tons of force but that's surprisingly strong . I would be scared to say the one I made will bend 1/4 " steel but not sure on the angle. Have you watched the cleat rod holder or the how to make a rodholder videos I used it on those video to Fabricate them
I know for sure it'll bend 3/16 over 90 degrees I've done that
What kind of welding system are you using? Brand?
It's a Miller millermatic 211 , I'm using 25/75 gas on it , but I'm only running it on 120v right now cause my panel box is full . But that will be changing soon
Damn your channel is really growing. I’m good I don’t think I need that reel 😂
Not much need for it now lol , yeah I guess I hit my stride Haha, I appreciate it brother
Machine of destruction, seems to work pretty dang good!!!🤣
It turned out good , you got anything you need broken lol I got this. I appreciate you brother
I wonder how hard it would be to make something that can bend square tubing. Possible???
I would say it would be possible since they have round tubing benders , I would have to research that one
Rofl. Awesome
For safety sake, please wear steel cap boots when working around the shop. Its not worth the hurt if you drop something heavy or sharp (or both) on your crocs!!! Nice Job.
Lol give it to me I will use as a sinker on my trout line 😜
That's about all it's good for Haha now any ways . I appreciate you watching brother
How close together can you do a back to back 90?
The bottom die is about 2" wide if that helps
I might have to unsubscribe cause my wife is falling in love with you. Can't have that. Nah, really though got both of us binge watching now. Great idea. Good info
I know how it is me and my wife both watch catfish and carp , but my wife likes the kids lol . I reallly reallly appreciate both you watching , if there's any thing I can ever help you with just ask
@@FishinNStuff will do. Just keep making good videos. I learn a lot. Making the kayak 360 light pole now. About $15-$2] total vs $65-9$90 you da man!
Anytime you give something away, put me in line. I will keep it to remember you by 👍
I sure will put you in it brother lol . I'l be doing a real give away soon I haven't done one in a while . I appreciate you watching and always commenting buddy
Well, NuSkool quits UA-cam and you smash all his reels. Thanks for the warning about the welding. I think I burned a retina.
Haha , never heard of you one getting they're eyes burnt watching a video you must have a state of the art ALPHA TV lol . Ol yeah that will teach him to leave stuff at my house 😜
The angle thickness for the top punch....3/16 or 1/4?
Dang it man im sorry that comment went to you some guy was making fun of how I talked hahaha , I get that sometimes , I must have been at work or half asleep im so sorry lol
The top die was 3/16" thick I'm pretty sure , but thicker wouldn't hurt at all . But that angle is so small and welded it would probably take more than that 20ton press come give to bend it
Great press brake fabrication, send me the next reels before you smash them
Sorry I thought it was funny that reel broke and they don't sell parts for it lol it's a Decooler Chinese reel . I appreciate it brother
Where's that new boat at.
Still at the Seaark factory I guess , they think it might be here this coming week , it's been about 10 weeks since I ordered it so I hope it comes in soon I'm ready lol
I could use those crushed reels for parts on mine.
I never thought about making em parts reels , they were cheap and didn't last long , and I was throwing em away any how . Do you use Decoolers
@@FishinNStuff what's a decooler
That's what those reels were Decooler reels . Very cheap 35 dollars a piece
@@FishinNStuff naw. I never heard of them before. I sure like your channel. You put out some interesting stuff. I like catfishing mostly.
Cool! Yeah you can keep the reels lmao!
Lol yeah I know they were actually broke and that's why I crushed em lol . I bought those just to try em out . You sure you don't want em hehe
Fishin N Stuff lol i figured they were lol. Na you can use them lol.
Haha no chance of that I trash canned em lol
Fishin N Stuff 😆😆😂😂😅😅🤣🤣yeah not much left of them lol.
I'll take so I can say I won some thing from fishin n stuff
Ol thank you buddy , I appreciate you watching and love it when ppl like you comment
I’m sweating watching you crush those reels. I want to fix it.
Haha those were cheap ol Chinese reel that I bought to try out and they both broke on me lol , but I know what you mean lol
I want it for a paper weight at the office lol.
That's a good reason actually. Email me your address. I appreciate you watching brother
I sent you an email buddy. Keep up the good videos
I want the reel. I can use it for parts
You got a Decooler reel
FYI CAREFUL NOT TO CRUSH A BALL BEARING, THE BALLS CAN SHOOT OUT AT HIGH SPEEP LIKE THRU YOU. SEEN IT HAPPEN ON A AXILE BEARING.
Your right buddy , I should have put don't try this at home on it . I was hiding behind something lol . I appreciate you watching brother
It don’t matter to me if it’s new or old broke or straight if it’s free it’s fur me!!
I would like to have that real I cannot afford to buy a real like that I am fishing with a Broom stick That real would make a perfect set up Haha
That reel only cost 35 dollars it eas a Chinese reel I bought about 5 years ago too try out , well I failed the test lasted about 6 months and broke on me , you didn't want that piece of junk lol , i was gonna throw it away but i thought that would be funnier
Is that normal to spend a bunch of money to build something, in order to destroy things?😂😜💪👍💯
Of course it is lol . Just so long as you have fun doing it lol
Apparently you dont like kastking lol. Work well for me.
That wasnt a Kastking man . That wad a Decooler it's a different Chinese reel . Actually I started to buy some Kastking reels a couple times but I've hit so many now lol . I bought those Decooler reel to use on my kayak so if I flipped it I wouldn't be out a lot of money but they broke . I consider Castkings on a didnt level than Decooler
@@FishinNStuff funny looks exactly like kastkings summer. I suppose most of the cheap junk is a copy anyways
Well they are all made in China but actually Kastking is on another level compared to Decooler , like I said I just bought those cause there was a good chance it could end up on the bottom on the lake lol . I kinda liked em . They looked good but didn't last long . I still might buy me dinner Kastking reels though . But I'm kind of partial too 6500 . And by the way I would never crush a good reel lol
I want it just cause you bent it all up
Im sorry after moving it around for about a week it fell all apart lol and I threw it away , I'm gonna try and get some more stickers soon how about one of those
I’ll take one
When I order some more I'l let you know buddy
Ok kool thank you
You could have donate to a young fisherman
How's that ?
My bad buddy I was at work and didn't get it lol , I'm sorry that reel was a broken piece of Chinese junk you can't even get parts for lol im not that haha I work hard for my money but I have and still will give a young fisherman any thing I can . I'm sorry I forgot I crushed a reel in that video lol
Need a handle lol
i like u but got to stop smashen fishen gear. u just might need parts. there i said it
Lol those were cheap Chinese reels I bought that didn't last 6 months . I was throwing it away any ways