I like how Brent's giving Gordo a shot at making some stuff. That's how you learn and become a good fabricator. You can't learn without first hand experience.
Keep rolling guys! The past two years have been so tough for so many, us included. I can't even imagine what you've been through with the EPA deal, and everything else going on. You guys are such a huge inspiration for so many, myself included. Keep pressing, and I hope everyone continues to support you guys big time! I'm going to order a shirt now!
This is the content that brings me to UA-cam. I enjoy this a lot more than dyno videos. I've gotten to the point that if I saw the car go together, I know what the dyno numbers will be. Wrenching and welding away problems is fun to watch.
Brent you are the best person with the best attitude on You tube these days. We would watch your grass grow or your paint dry just to get a dose of you.
Gordo needs his own utube channel imo! Brent, you're an amazing human, always so humble....even during those hardest times - when all shit is against you. 👍👍
Hey guys, your coolant lines, from memory (its been a while) the top two need to go to the to of the rad and the bottom two to the bottom of the rad for the water to flow correctly from bottom to the top of the motor, as they don't flow left to right. Might cause you some issues
Hey Jamie. You need to change the routing of the radiator hoses. The 2 bottom ports on the front of the block are the coolant inlet and should connect to the water pump. The ports directly above are the coolant outlets and should go to the top of the radiator. The way it looks like it is being plumbed will only partly cool half the engine, as the only way for the coolant to get out is through the steam ports on the one side. I hope you see this and would love to see use win again.
Am I going to be the only one to mention Brent ate a foam peanut!! This guy is wild, there isn't anyone else besides my father and Brent to inspire me. Such a great guy. Much love from Nothern New Mexico
Omg those fuses. Reminds me of when I had stereos that had those inside and when you had some tunes flowing through The system you could look at the fuses and see them making wave patterns and if it was the right amplifier you would see them glowing a little before they popped. The days of rocking out to things like AC/DC hells bells when you were mad at your parents for teaching you lessons. Oh man and then the AMP songs accurate pistonic motion! Even my speakers were pistons! I loved those square speakers.
Easy way to secure those plate bolts is just to stake over the back side of the treads, I have been using that technique for years without issues. Good luck with Skiddy!
Wicked job guys I love watching the factory correct pacer come together ❤ 🙌 don't sell your self and make a wheelie bar your going to need it that way it won't come down hard and brake the water pump!
I remember when the Pacer came out. (Yes I'm old). Gotta admit, back then, you would not have caught me dead in one of them. But DAMN, I'd drive this thing everywhere. LOL
Respect to the whole team we can see the energy has changed but gordo have faith you are a credit to the squad and are keeping the gimmicks and convo jokes etc that make the others click and respond and that's what makes the magic of a channel keep doing what you do Brent chin up everything will settle we respect all members past a present don't loose your pep 👌🏾⭐
Wish I were local or you guys were. A blank flat piece of plastic would have been ideal for Gordo. He could have mounted the FT550 to flat slab of plastic and plastic welded it to the bezel
I like how Brent's giving Gordo a shot at making some stuff. That's how you learn and become a good fabricator. You can't learn without first hand experience.
Yup, everyone needs to start somewhere. Having a guy like Brent mentoring you is a great way to build a young guys confidence and drive to improve.
This is the car I’m most looking forward to seeing at Cleetus & Cars. It should be a ripper. Really love seeing all the teamwork.
100% this is going to be dope
We're not worthy, were not worthy!!!! LMFAO
Yes, also nobody gonna comment on Jamie's new teeth!! Took me 2 episodes to figure out what's different. Good for you Jamie
Brent, you are such a good dude. So positive and uplifting to the people still learning. What an inspiration. Love the content.
Fabrication with GORDY! Love watching you guys learn and get better EVERYDAY.
Keep rolling guys! The past two years have been so tough for so many, us included. I can't even imagine what you've been through with the EPA deal, and everything else going on. You guys are such a huge inspiration for so many, myself included. Keep pressing, and I hope everyone continues to support you guys big time! I'm going to order a shirt now!
You fellas are killin it! Good to see Gordo learning some new skills.
Phong rocks, when he was talking about crows being puzzle solvers I was having a small world moment. Love the way you guys bring people together.
Phong👍 always thinking outside the box. I hope the Phoenix will one day cooperate with hard working Phong.
Fuel Tech for Skiddy👍 Good work Gordo
I loved the Gordo cam. Good work. Love that Brent's letting everyone go that's how you do it. Teamwork makes the dream work baby
This is the content that brings me to UA-cam. I enjoy this a lot more than dyno videos. I've gotten to the point that if I saw the car go together, I know what the dyno numbers will be. Wrenching and welding away problems is fun to watch.
PS... Gordo is a very welcome addition to the channel. Love that kid.
Gordo, you did good. That dash looks clean. 👍
That Pacer is looking Fabulous!! I can't wait to see it run!!
Gordo just sucking up knowledge from some of the best. Great vibes from great guys.
Brent you are the best person with the best attitude on You tube these days. We would watch your grass grow or your paint dry just to get a dose of you.
Phong...Tom...Hayden....good seeing the family come visit!
Its really nice to see Brent complimenting all the guys !!!
Yall are such a hard working shop full of enthusiasts. I love watching your shows. Looking forward to meeting you in person one day
Gordo killed it on this video!!
I commented about him goofing off! This is a serious Gordo poised for success!!
Working on your own projects makes me WAY more excited to tune in! keep up the great work. this project is VERY cool!
Appreciate all the hard work your doing with the EPA, would love to hear more on it in the future.
This is a RAD little project with the Pacer.
Awesome build!! Keep killin' it guys!! I can't wait to see Skiddy rip!! I LOVE the straight pipe exhaust! It's going to sound BAD ASS!!
this pacer just looks like a party! Can't wait to see it rip!
Glad to see you teaching Gordo some stuff . Need to get the next generation into cars
Top lines to top of radiator. Bottom lines to pump and then bottom of radiator
Yeah, definitely plumbed incorrectly
Gordo needs his own utube channel imo! Brent, you're an amazing human, always so humble....even during those hardest times - when all shit is against you. 👍👍
Hey guys, your coolant lines, from memory (its been a while) the top two need to go to the to of the rad and the bottom two to the bottom of the rad for the water to flow correctly from bottom to the top of the motor, as they don't flow left to right.
Might cause you some issues
yeah i see a big problem with the coolant line routing also
Love the classic blue and red AN fittings on this build
Hey Jamie. You need to change the routing of the radiator hoses. The 2 bottom ports on the front of the block are the coolant inlet and should connect to the water pump. The ports directly above are the coolant outlets and should go to the top of the radiator.
The way it looks like it is being plumbed will only partly cool half the engine, as the only way for the coolant to get out is through the steam ports on the one side.
I hope you see this and would love to see use win again.
Great job team and way to go Gordo!
I love the way you guys are always yourself:) keep up the great work!
You guys are amazing love to see the intelligence of your crew come together.❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️🇨🇦
Love Brent's positive jibs towards Gordo :) Top human being man Love it! LET'S GOOOOOOOOOOOOOOOOO
Am I going to be the only one to mention Brent ate a foam peanut!! This guy is wild, there isn't anyone else besides my father and Brent to inspire me. Such a great guy. Much love from Nothern New Mexico
Good to see Mr "All Motor" Phong. Love that little pacer. Back in 1982 I was 4 and my dad had a maroon one with woodgrain sides ... Memories...
Omg those fuses. Reminds me of when I had stereos that had those inside and when you had some tunes flowing through The system you could look at the fuses and see them making wave patterns and if it was the right amplifier you would see them glowing a little before they popped. The days of rocking out to things like AC/DC hells bells when you were mad at your parents for teaching you lessons. Oh man and then the AMP songs accurate pistonic motion! Even my speakers were pistons! I loved those square speakers.
Gordo listening to a "Beatles" tape cassette while playing videogames explains so much. This is why you are you Gordo !! Never change !!
Crushing this build in record time. Look forward to seeing this thing shred some tires!
Keep pushing and grinding everyvody!!!! You guys have been through so much and you deserve the best!
Easy way to secure those plate bolts is just to stake over the back side of the treads, I have been using that technique for years without issues. Good luck with Skiddy!
I'm loving this! Old school! It has the old family feel to it good stuff
Perfect combo for a burnout car, I'm excited! Plop a blower on it eventually and bring it down to Australia
Got to wrap the headers i always liked the look and function.
I wish I could build a car like this! The fuse board was probably bakelite. Old-school PCB carrier. Nothing wrong there.
Great group of guys and gals. Keep up the good work. 😁
THIS IS AWESOME! Keep kickin!
Thanks for sharing!
man, we need a Gordo in my shop! hard to find youngsters that want to work and learn these days. keep up the good work..so rad!
Iam glad to see gordo back in the scene more and putting In work good job dude
So much progress. Loving this build
Way to adapt guys, and way to step up Gordo.
If you run a common tube tying all header pipes together. Then install the O2 to each common tube. Then you can tune from each side.
Can't wait to see this thing rip super stoked for you guys
I like the pacer allot. The interior and dash are so cool. 70s ruled
Great vid guys. Your Killin it as always. Can't wait for Phong to make another vid soon too!!.
I'm loving the way your channel is moving.
Wicked job guys I love watching the factory correct pacer come together ❤ 🙌 don't sell your self and make a wheelie bar your going to need it that way it won't come down hard and brake the water pump!
Nicely done
Good morning 🙂
This is the coolest build on UA-cam ratenow amazing
I can't wait till the April 1 . The inside of the car 🚗looks good boys let's go
Love the hard work,Gordy cool coz brought up with the Beatles..back in the USSR
Hey hey hey! It's good to see Phong out and about 👋 Hope all is well
Top of the morning boiz!
good morning, bro!
Thank you guys
I remember when the Pacer came out. (Yes I'm old). Gotta admit, back then, you would not have caught me dead in one of them. But DAMN, I'd drive this thing everywhere. LOL
Killing the pace on the pacer guys good content cheers
Sifen tube across each bank of headers...it will also ad some strength
Good to see phong again!!
“You see all the dyno video… there aren’t any”
That statement hit deep.
Good job Gordo.
Happiness = Jamie holding a new fueltech loom and eyeing up the bay
Well done, Gordo.
I would wrap the bottom of the zoomies to try and save the plug wires
You could run a 3/4" tube between the zoomies for the O2 sensors
I like to see Gordo getting involved in building
Respect to the whole team we can see the energy has changed but gordo have faith you are a credit to the squad and are keeping the gimmicks and convo jokes etc that make the others click and respond and that's what makes the magic of a channel keep doing what you do Brent chin up everything will settle we respect all members past a present don't loose your pep 👌🏾⭐
im so hype about that built
Reinforce the wheel wells now so the tire that blow do tear the sides off that mint whip.
We always stand next to you 🇺🇸🏎
How awesome is this build! Go PFI!
Let's get RAD! Morning PFIspeed! Can't wait to see this thing RIP!
Brent... You need to make a
"Good Job Gordo" shirt. That kid is a damn good person
I love how Brent ate a peanut.. some don't know they are made from corn starch, I love doing thelat trick to people! 😂🙌
so awesome that is is pretty much plug and play!
You got this Gordy!
Such a clean swap!
You keep posting I keep watching.
Hell ya Tom last video and and now Phong graces us with his presence
Phong should be a part of PFI,lot of space there and he would be a great addition to the Team.
Hey Gordo, if you tighten the drill by hand it might just grab the flat thing! XD
I swear Gordo is the Mike Teutul of PFI speed!
hey brent. thank you for just being RAD man
PHONG!! We missed you!!
That fuse panel is actually like a printed circuit board or fiberglass
Funny how you mentioned lock tite on the intake blade screws 😂🤣
Great Job Gordo 💪🏽
Wish I were local or you guys were. A blank flat piece of plastic would have been ideal for Gordo. He could have mounted the FT550 to flat slab of plastic and plastic welded it to the bezel
Tactical safety glasses are legit.
For the car show, you have get that 8 track player running!
Locktite them Motion throttle body bolts. They have been known to come out 😉
Kickin arse on the pacer boys. it gonna rip.