This vid is near and dear to me. I had a tricked out 2011 trek ticket DJ. And a 2016 ticket slope. The DJ was the s..t. my frame at the time was worth 2500 cad. The raw dark tink with pink high lights was soo sic .. $8000 DJ stolen day before my birthday... was such a crappie birthday.. great vid brother thank you!!
love the entrance like to highly classified underground facility only the high of highest clearance is allowed to get into,,,,,lol! Great build and stunning cinematography, thanks V!
Almost all DJ bikes use inner tubes because of the high pressure requirements and the simplicity of them. If your still running tubes on a trail bike tho, your definitely making a mistake
I have been waiting for someone to build this frame love the wheel choice and stem undocking the dream for a moment of air bound freedom. I am not a complainer when can I come pick it up lmao. I know what's going to be my next lady for the days to come beautiful finish just very happy to see a personal dream on the screen.
Bike linda né? Incrível Pena que aqui no Brasil muitos querem uma bike dessa pra ficar empinando "KKKKK" Eu mesmo quero uma pra fazer TRILHA, começar bem no DH até tiver uma top de linha
Great looking bike. Could you please tell me the stem length, Handlebar rise and handlebar width that you used on this bike build. I have a trek ticket DJ myself and I am struggling to get the bike to feel comfortable to me. I could use a little help please and thank you
Sinto por morar aqui no Brasil e não encontrar peças como essas para montar uma bike assim. Esse quadro só conheço uma pessoa que tem. I'm sorry to live here in Brazil and not find parts like these to assemble a bike like that. This picture I only know of one person who has it.
The bike is solid and my Ebike conversion went great. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Very smooth ride at 30mph with no problems (135 miles ridden so far). The picture is a bit deceiving - there is WAY less space in the center of the frame than it shows. The suspension connection takes up the entire thing. So I needed to attach my battery on the bottom of the frame and my controller on the top. Instructions for assembly were lacking but honestly it wasn't too hard to figure out even though I have very little bike knowledge. Watched some youtube videos on adjusting the disk brakes but that was it. Still, I am loving it and very happy with the purchase.
Уровень сборки - магазин Ашан 1. При установке вилки, сразу нанес смазку а потом начал пилить и торцевать шток, следовательно все опилки попали на смазку в рулевую. 2. При установке системы шатунов не отторцевал посадочное место в раме под каретку, как следствие отвратительный свободный ход шатунов и убитые подшипники каретки через 3 месяца. 3. При укорачивании гидролинии тормоза, залил ручку и руль тормозной жидкостью (дотом) как следствие, облезшие анодировка и краска на ручке. 4. Его удовлетворили 2 оборота свободного хода заднего колеса при настройке суппорта заднего тормоза? Серьезно? 5. Обрезал гидролинию не сделав петли вокруг штока вилки, как следствие, невозможность сделать "барспин". Короче вел за 200к собран так, что лучше на стелсе, чем на нем(((
Isn't the chain too tight? I know they try to avoid the pedals from moving in the air but that seems to be too tight to me, like it's difficult to move it.
@@leytondavis1121 no it’s actually a common thing to do when build a bike, people do that just so they can get their bars in the bike, so they don’t haft to hold the bars in a certain position and tighten the bolts at the same time. It’s a less pain in the ass that way.
I felt asleep last night watching this video.When i woke up in the morning my phone was dead.Keep up the good work❤️
Yes!!!!
Same
This vid is near and dear to me. I had a tricked out 2011 trek ticket DJ. And a 2016 ticket slope. The DJ was the s..t. my frame at the time was worth 2500 cad. The raw dark tink with pink high lights was soo sic .. $8000 DJ stolen day before my birthday... was such a crappie birthday.. great vid brother thank you!!
love the entrance like to highly classified underground facility only the high of highest clearance is allowed to get into,,,,,lol! Great build and stunning cinematography, thanks V!
This is like asmr. It’s so nice and relaxing.
What a delight! A bike build with inner tubes👍🏻. Thought i was the last/only one.
Almost all DJ bikes use inner tubes because of the high pressure requirements and the simplicity of them. If your still running tubes on a trail bike tho, your definitely making a mistake
@@SpencerBaum Don’t matter as Sam pilgrim runs inner tube on all his bikes
Metal shavings all up in that shitload of grease 😭😭😭😭😷🦠😂
Way to chill while in a quarantine
Nice build Travatar! This guy builds jumps with the same passion. MH Crew lives!
I have been waiting for someone to build this frame love the wheel choice and stem undocking the dream for a moment of air bound freedom. I am not a complainer when can I come pick it up lmao. I know what's going to be my next lady for the days to come beautiful finish just very happy to see a personal dream on the screen.
I like the fact that the mechanic is on crutches. Kindred spirit!
More videos with dirt builds plzzz❤️😍
Greetings, I'm from Brazil, this bike is a dream, I would be delighted to have one of these🙏
Absolutely beautiful bike I’m currently looking at this frame too
Muito satisfatório ver vc montando uma máquina desta parabéns 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Bike linda né? Incrível
Pena que aqui no Brasil muitos querem uma bike dessa pra ficar empinando "KKKKK" Eu mesmo quero uma pra fazer TRILHA, começar bem no DH até tiver uma top de linha
those were some superb DJ skills...
The first dj bike built with tools and not bricks, hammers and rocks 😂
🤣😅
😅
Untraditional
Uncultured
this comment is so sam pilgrim hahahaha
My local bike shop has something similar sitting on their floor right now. A custom build they did. And….. i can not stop thinking about it.
I would definitely use side cutters instead of a razor blade with those zip ties though. Less chance scratching that frame.
Scratching the frame? It’s a dirt jumper tho!!! 😂
Ok another great bike build, not quite like Ryan's..I usually watch these builds at night drinking a bottle of wine. 👍
Hail yea
अद्वितीय बहुत परिश्रम कर उच्च गुणवत्ता वाली साइकिल की रचना की है। महानतम ❤🇮🇳👍🙏
Just heard the news. Sad to hear it. This has been a very helpful video for my own dj build. Thanks Travis
What’s the news?
only a chromag overture saddle was missing
Good job.
Beautiful bike 👌🏼
this man really likes his lower headset bearing lube 4:29
Thats cool men.. I love your bike.. I have the same dream build on my channel but yours was dope👌 - MotoNIX
Dont ask about the price u couldnt even effort that damn amount of grease tho 😂
Inlove with that bike
🚲😍😍
Me encantó la boleta👍
thanks for the idea bro, now i plan to convert my mtb into dj bike.
I'm like it .very nice ..
Very good bike!
That looks sweet!
Why would anyone fully grease a fork and then cut and file it?? Those tons of grease have definitely picked up loads of chips
Yeah you can also put to much grease on to something
yeah, he also did the wheels in a weird order
It’s crazy how he had a camera set up exactly where the cut off piece of fork tube would land when it fell 😂
Oh yeah?
Nice video
a really good bikeporn
the sterrer tube cut that high hurt me a little bit..
Leaves enough room to install a hydraulic gyro
Some people hate low bars on a jump bike.
Wow very nice 🚴♂️🚴♂️
Cool music, matches his cool hair.
Very nice build but the seat is killing it....
So relaxing ngl especially if u love bikes like me
I love mtb hope to have someday!😇🙏🙏
i got the same frame mines number 5 i built it up in in october
I want one now
Great device
nice build!
for flush cut a zip tie use KNIPEX 78 03 125
Nice bike
Awesome build!!!! The wheel spokes look thick!! Where did you have those built? Thank you!! 👍😎❤
Nice video...
Salam dari indonesia
I feel like a build but with no music or no talking would be cool kinda like an asmr but not with all the weird stuff like tapping and whispering
Back sound makes me sleepy and I fall asleep
Great looking bike. Could you please tell me the stem length, Handlebar rise and handlebar width that you used on this bike build. I have a trek ticket DJ myself and I am struggling to get the bike to feel comfortable to me. I could use a little help please and thank you
get some longer grips itll give you a much more comfortable feel as you can move your hands around more
Sold it already. Thanks though
i wish that i could get one like this..kikiki
Just perfect
heres your supporter brother thats my dream bike hopefully your can help me in my dream
Thats my dream bike😁
Thank you🥰🥰🥰
5:50 hurt me
Yes man that wasn’t his best idea
No front
eres un teso me sorprendes suigue tus suenos alcansalos eres un creador te doy laic te felicito por cierto soy samuel rojas ramires y tengo 7 de edad
how much costs this bike?
btw really good video,keep doing more videos like this!
Antonis Moutsios id bet atleast 3k new
Meu sonho é ter uma dessa
Vc consegue
Eu também tinha e hoje eu tenho a minha, não é a mesma coisa de antes porquê eu queria pra pular, hoje a idade já não permite, mas eu tenho
Shortenig the brake cable in DJ bike 😂😂😂
the grease on the stanchion triggered me hard.
yas
Esmeulon - Gostei ☠️
.
Sinto por morar aqui no Brasil e não encontrar peças como essas para montar uma bike assim.
Esse quadro só conheço uma pessoa que tem.
I'm sorry to live here in Brazil and not find parts like these to assemble a bike like that. This picture I only know of one person who has it.
UPHILL LAUGHING 🤣
Tank you
After stumbling on this….I realized my ticket DJ is super high end and overbuilt 😅
Nice bike.. i like bike to but dont have enought money to buy.
Wickedness
This dude is so generous with that white lube that I'm thinking he should be in whole another industry
Quero uma dessa!
Vai pra gringa e compra
@@pedromacedo4107 vai ti phock iu!
@@ratschongs5884 ???
Hi fc from Laos
Perfect 👍
T'es fr
The bike is solid and my Ebike conversion went great. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Very smooth ride at 30mph with no problems (135 miles ridden so far). The picture is a bit deceiving - there is WAY less space in the center of the frame than it shows. The suspension connection takes up the entire thing. So I needed to attach my battery on the bottom of the frame and my controller on the top. Instructions for assembly were lacking but honestly it wasn't too hard to figure out even though I have very little bike knowledge. Watched some youtube videos on adjusting the disk brakes but that was it. Still, I am loving it and very happy with the purchase.
19:27 what is it? That rubber? Looks like it does not come from factory on all suspensions.
El canal de Bati air volume spacer it’s plastic
This bike really needs a hydraulic gyro, also a pivotal seat and post
Grande
Уровень сборки - магазин Ашан
1. При установке вилки, сразу нанес смазку а потом начал пилить и торцевать шток, следовательно все опилки попали на смазку в рулевую.
2. При установке системы шатунов не отторцевал посадочное место в раме под каретку, как следствие отвратительный свободный ход шатунов и убитые подшипники каретки через 3 месяца.
3. При укорачивании гидролинии тормоза, залил ручку и руль тормозной жидкостью (дотом) как следствие, облезшие анодировка и краска на ручке.
4. Его удовлетворили 2 оборота свободного хода заднего колеса при настройке суппорта заднего тормоза? Серьезно?
5. Обрезал гидролинию не сделав петли вокруг штока вилки, как следствие, невозможность сделать "барспин".
Короче вел за 200к собран так, что лучше на стелсе, чем на нем(((
Конечно, дело индивидуальное, но заднюю покрышку он установил не совсем правильно: тэйбл топы, сзади, устанавливают "елочкой" назад ))
The 2nd longest Gee video is a DJ 🤔😃
More grease for grease god
Esto es une moda
I jus this music to sleep 😂
Wowwww
O Afonso Padilha largou a comédia e começou a montar bikes kkkkk
Isn't the chain too tight? I know they try to avoid the pedals from moving in the air but that seems to be too tight to me, like it's difficult to move it.
Dirt jump lines, when built correctly, require little to no pedaling at all. That chain tension is pretty much perfect for that build
@@DaxidWeldingCo Makes sense, but whenever you want to move your bike anywhere else it would be a tough job I think...
гениально, намазать полторы тонны смазки, а потом обтачивать , в смазку теперь попала алюминиевая пыль и вместо смазки абразив
rockshox pike ultimate fork is 26er or 27.5 (650b ?)
Pike dj now comes in silver
www.sram.com/en/rockshox/models/fs-pike-dj-a3
9:33 Did this man just put the bars on upside down?
It’s a lot easier like that lol
Trey Driscoll... sure😂
Leyton Davis mtb that’s a fact😂
@@leytondavis1121 no it’s actually a common thing to do when build a bike, people do that just so they can get their bars in the bike, so they don’t haft to hold the bars in a certain position and tighten the bolts at the same time. It’s a less pain in the ass that way.
why do u even care tho if the end result is them upwards anyways?! xdd
How i wish i can have some bike so that i can travel to my work bec. Of this pandemic i need to pay double the normal fee hays sad 😪
Wait, you’re meant to keep that little plastic thing on in the sram dub bb???
bike is 24 inch or 26 inch
Gee Milner... your thoughts?
👌
Can i use this frame as mtb? With gears and shifter?
Parabéns
نه تخخهع
Thrill wer
No grease on the Crankset? Why the rear wheel barely spins?
Risky move to cut the Steerer tube after put the grease...
Is there a way to find the buildout for this bike? I know you mentioned some brands in the description...
এগগগব
Is that headset a press fit headset?
What for a industry nine?