Threads are really nicely machined on hubs typically so it is really no big deal and if you noticed the power drill torque was set really low. I do this all the time on my rotors with no issues.
Those particular bolt holes are pretty much self centering those bolts due to their particular machining and thread pitch. Plus, after years and years and years of wrenching, you just know. That's my case.
Finally, I'm not the only one that uses pipe cutter instead of hack saw. I could never understand how using such violent tool to hack on my delicate instrument i call "My Bike"
In 90% of casses that bike comes with pike or fox 34 and inline rear shock. Now he pump-up the volume to the max and put 36 up-front and that big ass rear shock. Its now short travel enduro bike 😎🤙
Awesome! I'd love to see talent like this, showing kids how to do this, to inspire them to become their own bike mechanic! Remember, there is an i in kind! Be Kind!
This is hilarious, hear me out. Back when you built up an Enduro I had already traded in my 2019 SJ and transferred all the shiny bits to a brand new Enduro frame! Then, after moving to Colorado I found that the Enduro needed a slightly poppier younger brother. I'll give you 3 guesses on what I purchased back in March 2021!
Oh my gosh, what a wonderful vid! I want this guy as my personal mechanic forever! The attention to detail was incredible! Amazingly satisfying to watch and also an incredible build!
In particular, I would like the same care when assembling my wheels. They often neglect this in workshops out there... Congratulations on the good service provided, it's nice to see!
This is seriously beautiful!! As a mechanic by trade, i applaud you! I loved this video, im just recently getting back in to bike since i was a kid. I worked on all my families and friends bikes, this video brings me much joy. Thank you
i like the way u assemble the entire bike what really likes to me while im watching is really organized ,every single detail is so net and clean your surrounding your tools ,am so impress the way u do ryan ,really fun to watch
Palmer is the best! I would love to hear him discussing custom build choices for these "Dream Builds". That Super Boost wheel looks so much more centered and better than the offset 148 wheels!
That looks so amazing, every seasonal service i'm trying to do something like this, but i have 2008 gt chucker 1.0 and want to ride full suspension bike with 160 mm of travel. Every day of hardworking in road engineering is motivated by that dream. Maybe later i would have an opportunity to do this thing with my future full suspension bike.
Experiencing the Dream Builds episode showcasing the Evil Following was an absolute delight! 🚵♂💥 The passion and dedication poured into this little big bike had me captivated from start to finish, leaving me inspired to hit the trails and shred some dirt. What a dreamy ride!
The fact that you verify the BB socket so throughly is something you do not see every day (5:20). The trough axis verification from both sides and ensuring the bed flatness on each side is something most bike builders (that I've seen!) don't do! People need to verify what they've bought and this is awesome to see! (And after a while they complain about creaking when pedaling, or that their BB is destroyed in avery short amount of time!) Anyway, when you state "Good Job!" on the bike's constrution BB is something you don't see everyday! You got yourself a subscriber!
Axs components should come with plugs to put into the open internal routing holes on the frame to keep dirt and water out. That would be impossible to clean
As a fellow bike mechanic you just know when someone enjoys what they’re building, a pleasure to watch, kudos.
كم سعر هذه الدراجه
@@AliAhmad-zh3fv 6.2k-7k USD.
@@iMoreno haha that would be nice. Try 9- 10k. AXS drivetrain and dropper, custom built wheels and that push coil shock are all big bucks.
@@ArmorOfZeusog
Effie ogaoga- og 3?
Да не хх
This is the best bike build video I have ever watched. Brilliant. The detail in it alone was stunning. Glued from the first minute to the end. 👍👍👍
seemed so excessive to me.
Most relaxing thing ever
@@AJ-we9kdiuiuuuuuuuuuiuuu
@@AJ-we9kdiuiuuuuuuuuuiuuuuuuuiuuiuu
Great build! This guy is so confident to start threads with a power tool
Was thinking the same. By the time you notice you cross threaded it's probably too late.
Threads are really nicely machined on hubs typically so it is really no big deal and if you noticed the power drill torque was set really low. I do this all the time on my rotors with no issues.
Those particular bolt holes are pretty much self centering those bolts due to their particular machining and thread pitch. Plus, after years and years and years of wrenching, you just know. That's my case.
Awesome to see Palmer back in the Barn doin' his thang!
The title of this video should be "A Feller Makes a Pedal Bike" because of that Vice Grip Garage hoodie. A guy really enjoyed this video!
Absolute poetry in motion! Love seeing a master work their trade no matter what it is.
This just so happens to be something I love.
if only the mechanics at my local bikeshop is as gentle as this man. the way he holds every parts as if he's holding a God Tier item👍🔥
Thanks for the video, nostalgic for the old days when I also took care of my bike. That's what it means when a person loves his job.👍
Evil bikes are just beautiful 🔥
And they ride even better than they look
The most beautiful Evil build! I could watch this on repeat
Something really therapeutic about watching a master at work! What an artform 👌🏻 took me 3 days to build my new Nukeproof Giga in March 😂
Pls do more dream builds I freaking love watching these 🤣😂😅 they are so calming
💤
@@krystalannawilliams2653 yess bike ASMR
Finally, I'm not the only one that uses pipe cutter instead of hack saw. I could never understand how using such violent tool to hack on my delicate instrument i call "My Bike"
hilarious
Not as clumsy or random as a blaster; an elegant weapon for a more civilized age.
I use one as well, so much better than a hack saw.
But he clamps it into a hacksaw guide first to throw you off 🤔
I've been told that pipe cutters ovalize the steer tube. But I've done it either way and haven't noticed a difference, really.
In 90% of casses that bike comes with pike or fox 34 and inline rear shock. Now he pump-up the volume to the max and put 36 up-front and that big ass rear shock.
Its now short travel enduro bike 😎🤙
El mundo necesita más vídeos como este !!!!!
This is expertise. Effortlessly doing it right and producing a a quality outcome. I can hardly inflate my tyres.
Awesome! I'd love to see talent like this, showing kids how to do this, to inspire them to become their own bike mechanic!
Remember, there is an i in kind! Be Kind!
a,This is the best bike building video I've ever seen. Excellent. You could be the next winner! , congratulations, hug tight.
The most beautiful built to watch on UA-cam…
Amazing
You can tell he takes great pride in his work craftsmanship is unparalleled
thats one awesome frame in itself , but with all those components you put on it , you killed it 👌👌👌
Nice work Palmer. Stunning. Tight. Restrained. 🙌
This is hilarious, hear me out. Back when you built up an Enduro I had already traded in my 2019 SJ and transferred all the shiny bits to a brand new Enduro frame! Then, after moving to Colorado I found that the Enduro needed a slightly poppier younger brother. I'll give you 3 guesses on what I purchased back in March 2021!
Awesome job! The whole bike. But the pit perfect balance for the wheels got my attention 👏🏼 Congratulations 🎉
You are a master 👍🏼👍🏼
I wish I skills like that!
And bikes like that👍🏼
So awesome!
Thanks for sharing this video 😊
Watched from beginning to end!! Wow!! An artist!
Oh my gosh, what a wonderful vid!
I want this guy as my personal mechanic forever! The attention to detail was incredible!
Amazingly satisfying to watch and also an incredible build!
This was an amazing built, nice vice grip garage hat by the way
cant believe a bottom bracket still goes in FT.. amazing build video,, its poetry!
This is just relaxing, I'd like to have all those tools, I'd love to become a bicycle mechanic someday.
That was so satisfying to watch.
For me was something like therapy.
Thanks!
My eyes are glued to the screen for 46min and 21sec.
Wow. So beautiful. Wow.
chega ser uma ópera, estar vendo alguem trabalhando em projeto de última geração é simplestmente incrível.
I couldn’t stop watching
In particular, I would like the same care when assembling my wheels. They often neglect this in workshops out there... Congratulations on the good service provided, it's nice to see!
I see so many bike build videos with techs showing their bad habits, this one was complete and utter perfection.
This is seriously beautiful!! As a mechanic by trade, i applaud you! I loved this video, im just recently getting back in to bike since i was a kid. I worked on all my families and friends bikes, this video brings me much joy. Thank you
This is a talent pls put more videos like this on your platform. Amazing just amazing
Такой я себе ни когда не смогу позволить) Золотые руки, такую красоту сделать)
A true masterpiece created by a master at his trade. You balanced the rims so well man! Best minutes I’ve spent here in a long time!
i could dream to have this bike, very well done on this amazing work of art
Great mechanic. Great vídeo prodution 👏🏻👏🏻
One of the best build videos I have seen. Maybe second best. Amazing. Very relaxing
Wow! You are an amazing bike mechanic.
Watching someone assemble wheels it’s like watching golf!
These videos are so good and as usual, Ryan knocks it out of the park.
Appreciate Precision Great Workmanship, Awesome Bike & 🔧 👌💯
adding motor oil to the rear hub to quiet the pawls is a nice little trick. makes a surprising difference.
Fascinating... I really want to see that bike ridden.
This guy wrenches. Abbey, Snap-on, Wilton, Wera, Knipex, he's like the Dave Rome of MTB
yea how his turn is almost makes it solid a mat wrench.
The only tools that should ever be used-quality 🔥
@@j_roache_doherty lol
Still the most beautiful bike build I've seen to this day
Such great production value!
the intro and the music underlaying. One of the best dream build videos I’ve seen. Great job Palmer!
Love the Vice Grip Garage beanie!
I was coming to make the same comment!
i like the way u assemble the entire bike what really likes to me while im watching is really organized ,every single detail is so net and clean your surrounding your tools ,am so impress the way u do ryan ,really fun to watch
Great video with attention to details. Pleasure to watch. Awesome build.
Awesome build man! The Evil Following is my dream bike. BTW, I like the Vice Grip Garage beanie you are wearing!
Palmer is the best! I would love to hear him discussing custom build choices for these "Dream Builds". That Super Boost wheel looks so much more centered and better than the offset 148 wheels!
Good to know that my schedule 40 PVC pipe "crown race tool" is even used by the pros.
U are professional bro!respect from your job!hello from Bucharest România 🇧🇪
Ok
Beautiful video, hermosa Música Asmr. Hernosa Bicicleta. Talentoso. Felicitaciones Maestro.
1:45 love the vice grip garage beanie
These videos are healthy for my heart I reckon.
Vid
Respect Good job high professionellity bike work i have seen !! 👍
Greetz from Germany
Anyone else see VGG beanie? You got yourself a nice going to town rig there!
First thing I noticed!
Nice ASMR vid i literaly listing this with my headphones on AND just laydown.😑😑👍👌😄😌
BEAUTIFUL WORK !!! AMAZING VIDEO !
That looks so amazing, every seasonal service i'm trying to do something like this, but i have 2008 gt chucker 1.0 and want to ride full suspension bike with 160 mm of travel. Every day of hardworking in road engineering is motivated by that dream. Maybe later i would have an opportunity to do this thing with my future full suspension bike.
this bike is simply a piece of Art
Nothing but perfection!
Experiencing the Dream Builds episode showcasing the Evil Following was an absolute delight! 🚵♂💥 The passion and dedication poured into this little big bike had me captivated from start to finish, leaving me inspired to hit the trails and shred some dirt. What a dreamy ride!
I had to cringe as he goes in with a red hot poker into those Santa Cruz reserve rims. Brave man!
So relaxing to watch thankyou. Love the bike
The fact that you verify the BB socket so throughly is something you do not see every day (5:20). The trough axis verification from both sides and ensuring the bed flatness on each side is something most bike builders (that I've seen!) don't do! People need to verify what they've bought and this is awesome to see! (And after a while they complain about creaking when pedaling, or that their BB is destroyed in avery short amount of time!)
Anyway, when you state "Good Job!" on the bike's constrution BB is something you don't see everyday!
You got yourself a subscriber!
Саме приємне відео яке я дивився. Дякую💪
Always amazing to see with how love these build's been done.
this is a whole art, amazing!🤩
Wow i want this mecanic guy, all is perfect and smooth
Far better than a Asmr video, I'd love a chance to ride that bike
Absolutely beautiful , a wireless derailleur and transmission group set that probably cost more than my entire bike .:)
That's one hell of a bike right there
I really like this video 👍👍👍👍❤. I will continue to wait for the next
showing off gud technique ❤️👍 proper procedure
Amazing in every way
Damn this was posted on my birthday. What a gift that would of been!
What a Amazing Bike...Thats my absolut Dream Bike...🤟👽
Was sitting there thinking how does man know what spoke goes into what hole. Then it hit me. Man wears sandals with socks. What a epic build
Ayyyyyyyyyy, another fellow fan of VGG (Vice Grip Garage)
This guy knows what he is doing
Pure hand build 🍃
A master at his craft!
Pretty cool to see a guy wearing a Vice Grip Garage beanie
Between the music and camera angles I was waiting for a british guy to start talking about a new species discovered in a work shop.
Nice! Well done!
:)
Fantastic!!!
"Love how he used the Tape Roll as Wheel holder."
Where are the valve caps?
Ps. Outrageous build, as always, a real pleasure to watch 🍻🎩
Axs components should come with plugs to put into the open internal routing holes on the frame to keep dirt and water out. That would be impossible to clean
They’re specific for every frame??
Yah I agree. But I feel like the brand of the frame would have to make the plugs bc not all the holes are the same for each bike.
@@landonlewis5918 Not sure about other brands...but my SC came with plugs for the holes 👍
Nice video ❤
I'm From Bangladesh love you bro😊
I’d like such magic drawers too. Every time you open it, you find something new and shiny….😅
The perfectionists 👏👏👏👏