2008 Silverado 2500HD 6.6 Duramax Water Pump Replacement
Вставка
- Опубліковано 28 лис 2024
- Replacing a water pump on a 2008 chevy silverado duramax 6.6 turbo diesel
Crank lock tool and crank socket : amzn.to/3QIUEdn
Fan Clutch Tool kit (requires air hammer) : amzn.to/44cYE95
Ingersoll air hammer (not one in video ) : amzn.to/3YGxdni
Water pump : amzn.to/3OysejI
Dexcool coolant : amzn.to/45zhQin
Thanks your video was very helpful. Everything went as planned except metal bypass O-ring. I ripped the first one and had to run back to the dealer. I might add the two lower fan shroud bolt can be a pain. Removing the air intake w/bracket and air charge pipe made the access much better on passenger side. Harmonic balancer was easy ,3/4 drive socket with breaker bar also a 2 ft extension from my jack hand made simple work of it.
You made that balancer bolt look easy man! I've got my whole front end off and can't get the damn thing loose haha.
You have to be a big dude to get it by yourself normally take 2 with a breaker extension
3:30 That harmonic balancer is bolted on extremely tight and may have loctite on the bolt because that crankshaft doesn't have a normal keyway but a couple of small pins instead. Those pins are notorious for shearing off causing the balancer to spin.
What was the live that you stuck under the pickup to keep it from turning
Tool broke a chunk out of my casing when breaking the balancer bolt loose ugh
Did you replace the balancer bolt?
I have never replaced the balancer bolt in the couple hundred "at least" Ive done.
What is this tool that you used to lock the drive train?
This is the kit, it includes the lock for the pickup trucks and the kodiacs , also the harmonic balancer socket. amzn.to/3UQ3GXY
What location are you at? I have a water pump that needs to be replaced on my LMM Duramax.
Im based out of the antelope valley
Where are you located and what would you charge to do water pump on lmm it’s deleted. I’m in East Tx
Where you located and what would u charge lmm water pump east Tx
How can I get in contact wit you bout some work on my diesel truck?
Same.
Good video sir. Is there any way to reach out to you for an opportunity of Auto lighting review? We would like to invite you to do a video for our LED lights.
Yes send me an email at drewsshoplife@gmail.com
@@drewsshoplife email sent,sir. We are looking forward to figuring out what we could do.
FYI, people are looking for where the bolts are or the hidden fastener. Time lapsed videos showing us you can do it are absolutely useless. Thanks for nothing. Why didn’t you save yourself some time and simply take a picture of before and after. You really didn’t bother showing anything else.
Why the fck would the make the studs instead of bolts like the 6.0