these are the pro series to be specific. they have a slightly updated mold supposedly to help prevent interference afaik. there wasnt any interference with this setup from what i recall, but ive heard a variety of different answers.
one thing i did notice is that sometimes the keys would just refuse to respond properly when plugging it in, unplugging and replugging it a few times seemed to fix it. i had a one-case scenario where the 'i' key just got stuck too, same fix.
they are. i havent found any interference problems with this setup as a lot of the newer gateron housings use an updated design that help prevent switch interference with cherry profile keycaps. do note though, not all cherry profile keycaps have interference either.
@@miyou3playz_yt389 havent tried ktt roses or mallo's so im unsure there. in theory, you should be fine with the milky yellow pros or any long pole switches though... side note, nearlucid used mint chocolate chip switches in his build and had interference still with gmk keycaps
@@sushikotypes yea gmks are way thicker, so even long pole couldnt save them sometimes. Same goes for any thick pbt set like 21kb/XMI. From what i've seen gateron switches with north facing logos, such as the cjs oil king and gateron yellow pros have updated molds. Though it is interesting to hear that the milky yellow pros works in north facing, as their logo still seems to be south facing
@@corecombat26 im not incredibly familiar of what will or will not cause interference, but i replied a few days after i already sent the board out. from the best of my knowledge, it didnt have interference, but dont take my word for it lol
Nice build! love the sound. but what kind of tape did you use?
scotch blue painters tape, any painters/masking tape does the job though
@@sushikotypes How many layers do you use?
@@cdey3886 i used 2 for this build
is silicone mute pad + switch dampening pad + stabilizer stickers already in the kit? Do u prefer add bottom foam or not?
yes those were already included in the kit. case foam will depend on the keyboard; this did not include any and did not need it
there were slicone and stabs stciker but no switch pad
can you do a thock config with this board
sorry, its not my board so i no longer have it in possession
@@sushikotypes ok
is there no interference with gat yellow to cherry profile keycaps?
these are the pro series to be specific. they have a slightly updated mold supposedly to help prevent interference afaik. there wasnt any interference with this setup from what i recall, but ive heard a variety of different answers.
How???
did u handlube the switch?
stems are hand lubed, springs are bag lubed
edit: sorry these switches are stock, but thats how i lube my switches normally
Had any problems with it?
one thing i did notice is that sometimes the keys would just refuse to respond properly when plugging it in, unplugging and replugging it a few times seemed to fix it. i had a one-case scenario where the 'i' key just got stuck too, same fix.
@@sushikotypes could it be the switches problem or is it the pcb problem
@@miyou3playz_yt389 most likely pcb, since replugging the pcb shouldnt fix an issue like that if the switches were the problem
@@sushikotypes yeah right,i heard about another problem about a thread?
Do you know anything about it?
@@miyou3playz_yt389 sorry, havent heard of it
Those are cherry profile right? Is there any interference with those switches since its orth facing keyboard?
they are. i havent found any interference problems with this setup as a lot of the newer gateron housings use an updated design that help prevent switch interference with cherry profile keycaps. do note though, not all cherry profile keycaps have interference either.
@@sushikotypes would ktt roses,ktt mallo,milky yellow pro have interference with gmk clones?or just good quality keycaps?
@@miyou3playz_yt389 havent tried ktt roses or mallo's so im unsure there. in theory, you should be fine with the milky yellow pros or any long pole switches though... side note, nearlucid used mint chocolate chip switches in his build and had interference still with gmk keycaps
@@sushikotypes yea gmks are way thicker, so even long pole couldnt save them sometimes. Same goes for any thick pbt set like 21kb/XMI. From what i've seen gateron switches with north facing logos, such as the cjs oil king and gateron yellow pros have updated molds. Though it is interesting to hear that the milky yellow pros works in north facing, as their logo still seems to be south facing
@@corecombat26 im not incredibly familiar of what will or will not cause interference, but i replied a few days after i already sent the board out. from the best of my knowledge, it didnt have interference, but dont take my word for it lol
Do you edit the typing audio before synchronize it? Like noise reduction.
yes. i record audio and video separately, apply noise reduction to get rid of some hiss, raise or lower the db, then combine the two together
can i have a keyboard please ?
no
Its not candy
And even if it was i probably wouldn't give them
Save some money and buy a gas67
is look like edra ek384w