I have an Ultratech in the bayonet style blade. Best of both worlds in my opinion. Sharp on bottom and on 75% of top with just enough space for your thumb on the top of the blade. Bayonet is an awesome blade compromise.
@@kozmo7 Covid really screwed it up, and things were already hard to get from BHQ with popular knives even pre-covid. I haven't seen BRS balisongs in stock from their website in over a year. I admit I don't check every other day because that would be ridiculous, but when I remember, I check. Nothing in stock for ages. BHQ is still one of the best to buy knives from, even with the low stock. Because if BHQ doesn't have it, no one else will.
Love Microtech. I bought an Ultratech, UTX-85, and a UTX-70 before I even knew what I was doing. I did end up with the hellhound blade on the Ultratech and I absolutely love all three of them. Of course I purchased them all from @BladeHQ Keep rockin boys 🇺🇸🔪💪🏽
Tammy from the warehouse taught me something new. I did not know tape does not stick to ceramic blades, I will have to invest in one or twelve. Thank you, Tammy.
Hi Blade HQ! I'm actually from San Jose CA but thx so much for featuring my painting this means alot to me! Definitely gonna keep watching your guys videos thx again and Peace out!👍😎
I do EDC my ultratech dagger and I like having that point to piece anything you may want effortlessly, as well you basically have 2 blades in one hand you can cut up or down and I'd one sides a little dull from use the other sides probably got a little more edge to get the job done. 🥃cheers🍻
I carry a dagger blade every day. I have a Microtech Ultratech in Violet with a 204P dagger blade. When I bought it, I didn't think I'd really like having a dagger that much, but it turns out I use it every day at work. A very large portion of my job is receiving freight, guns, guitars, parts, tools, whatever. When I'm using it in my day to day workload, there is actually something to be said for not having a dull side. You stick your knife in the center of a taped edge and you can cut both directions without flipping the blade. I realize I might be a bit of a niche case, but I absolutely love my dagger bladed knife.
Love dagger blades. You have two edges to use. Comes in handy more than you think. I have the troodon, ultratech and Dirac. All in daggers, all in my edc. But also love my combat troodon with the hellhound in bronze coating and carbon fiber front scale
I’m late to this video but in regards to the dagger blade. I like them strictly for appearances. I don’t mind them for EDC but it’s not my go to for EDC. I had a dagger edge micro tech and just found sharpening it to be a little annoying trying to line up the bevels perfectly at the tip
Just got my Ultratech from you guys today, love the channel, love the customer service and shipping even more guys. Definitely gonna be skulking around for a Microtech bounty hunter or Rhodesian to pop back into stock.
Legit the best part of this video.. is when Davie showed up to say epic... And just because of that.. i paused the video.. wrote this comment. And because of that... You instantly earned another like
I have an OD green with Bronze hardware UTX-85 dagger blade. I love a dagger blade!! It is so great for nothing at all but man does it look great. I carry mine all the time.
My only druther with dual edged daggers if that even in states that allow for the carry and use of OTFs/Autos they have rules against dual edged dagger blades. Iirc, Virginia is like that. I prefer bayonet style blades for that reason.
I have the Ultratech with the dagger blade as you call it. No serrations just dual plain edge. I purchased it while I was in the service. It was purchased as a purely defensive knife. Absolutely great knives. I own several auto's including a pre Blackhawk Masters of defense which is another great knife , the folding blade doesn't deploy as fast as the Ultratech. I own a Gerber tanto blade I believe it is a 06? It was what was suggested when I joined the service. But shortly after picked up the Microtech ultratech. And I also have a fun little Schrade mini extreme. It is fun to deploy and has a lot of snap. The problem with it is that the blade doesn't always snap into lock position. I just purchased a Benchmade Infidel. I think I am going to like it a lot. Anyway for knives that can take a real beating and still perform would have to go to my Gerber and my MOD. My dream knife is a G&G Deadlock..
I carry 2 knives. One dagger for fighting, literally no other use. One for everything else. It was an Ultratech for a few years but i figured the one on my multi tool is good enough. Great knives though
I wish the Microtech Stitch would have made the list. I love my stitch. The blade shape hits on so many levels. Stout blade stock, super pointy tip and a great grind. And of course it fires like a Microtech.
I just got done playing with all 3 sizes at my local shop and you truly need to put your hands on them to truly make a decision based on your grip and EDC needs, the 85 is the same size as my Kershaw from years past the full size ultratech is not much bigger and is a good size in the hand the 85 again is the same as my EDC of the past 10-15 years and the 70 is the smallest practical EDC I'd consider it is very small in the hand but has a very comfortable feel and is easy choked up on wen out and all but completely disappears in the pocket and yes I tried all of them in the pocket just to get a feel for what will be my new EDC for the rest of it's/ my life... I think I'm going full size and then 70 latter on and skipping the 85 simply because the 70 and it's full size module are exact clones in a 70% scale where the 85 had a slightly different screw layout and I'm just that OCD 😉😉 good luck to anyone in the market and I really hope you can find a local dealer to have that hands on feel you really need to appreciat what your hand and pocket are really going to want after all it's a large investment in a knife especially if your like me and spend less then $100 average ever 5-15 years as you lose one or brake it lol 🥃cheers🍻
Kirk you are a better man than me! Hats off my friend!! Hehehe... Honestly I just can't unsee it now... Straight UP, Blade HQ owes you a FREE knife of YOUR choice from their inventory - - - NO EXCLUSIONS!!!
Microtech puts out some incredibly awesome/badass knives. They look really sweet and their quality is the best. Unfortunately, most people (like myself), can't afford to spend that much on a knife.
Yeah they are sweet and pricey, I couldn't help it though and got my first and probably only utx 85 for a Christmas present to myself last week. It's frickin awesome man, although I'm thinking I should have gotten an ultratech because it's pretty small and needs a longer handle
The knife that has been clipped to the strap of my backpack for the past 4 years is my S&W HRT dagger ,it was only $20 and like I said has been with me every day for the past 4 years so that’s my true EDC. It’s not a good knife to throw in your pocket but when it comes to self defense blades there’s nothing I’d rather have then a good full tang double edged true dagger. Mine has hung upside down on my backpack and never fallen out of its sheath but it’s also quick and easy to deploy.
I have always carried a boot knife or even a full sized dagger as my combat knife, and as a self defense role after I retired from the Army. When you are using a knife to try and save your live you want to go straight for the kill and clothing and equipment can impede a knife's stabbing ability. I know it sounds violent but it is what daggers were designed to do, dispatch the enemy as quickly as possible.
I EDC a dagger troodon and it does well for EDC. The utility of the blade style is nice. Havnt had to defend myself with it but given the durability from all the every day stuff it tackles I'm sure it would hold up well. Just glad I live in a state I can edc a otf knife without bullsh!t harrassment.
I love the fact that Kurt would rather shave 1 leg than touch that beard. Just think how much better the National Knife Day video would have been with smooth legs😂
I want to thank u for this video. I have been fabricating my own switch blade but I was running into some problems. however your video has so far been the most helpful video that I have seen. you did a great job explaining the mechanics of a O.T.F knife.
I’ve had my Troodon since 2014. Used it while in the Military and held up like a champ. Other than cosmetic degradation, the thing still fires like new. Like anything else as long as routine maintenance is kept up you shouldn’t need another blade for a while.
I carry a ultratech dagger blade edc and I usually have a kbar ek-44 on my belt. It's just my personal preference. I can use them for self defense and if one side gets dull I always have another one.
I've only carried dagger style OTFs as my main intention when carrying an automatic is self defense. Not use particularly. Hence my love of the "glass" breaker 😘 This is actually my issue tho. Given how expensive they are, I haven't had much chance to experience their different blade shapes. For whoever's is reading what do you think the best combo of defense and carry would be? I like the idea of the dagger eith serrations only on one side. But it still leaves the problem of blade strength kind of (not as much with the high grade metals they use but) and safety of having a double edge. Any ideas? Spartan seems great for self defense too
I like the way you’re thinking; I for me one of these OTFs would be used as EDC and other utility work, good for defense, and the glass breaker would be good if you need to get out of your vehicle and opening the door isn’t an option. Of course, you could always use it to to break other types of windows if you’d need to get out of the house.
I carry a double edged cypher with full back serrations and love having a full clean edge and a completely serrated edge for different tasks but mainly self defense. Having the piercing power and the ability to not have to worry about if my edge is facing the right direction if I dropped it in an emergency situation.
The reason I love my ultratech with a D/E dagger is because one side is fully serrated and the other is a straight edge. If I need to cut through something extremely tough like a seat belt or tough thick rope quickly, I'll use the serrated edge which will cut through like butter. There is a test online to prove what I'm saying. Not to mention, the stabbing ability with a dagger is greater and there is also twice the cutting edge on a D/E dagger than S/E obviously.
I like a dagger blade for edc mostly bc it gives me a razor sharp edge no matter what similar to a double bit axe. I never found myself putting my thumb on the back of a blade for edc so I never worry about it.
I absolutely enjoy my Microtech Ultratech Spartan Tactical. I removed the pocket clip because I holster carry with a kydex sheath and ulti clip... Fits perfectly in the watch pocket of a pair of pants! I ordered mine off blade HQ but wasn't happy that on the site it was listed as M390 and when it arrived it was Elmax. Still a great knife and it's been through hell and back with me. Used it to break a car window and pull someone out of a flipped car and just last week ran into a burning home to pull out a 3yr old little girl and hadto break a window to get out. It's become my daily after my infidel was stolen and I couldn't be happier with the smaller size still very heavy but it feels great! A D/A OTF is the only knife I will carry besides a fixed blade when wearing gloves! After having it for a few months I ordered a few more to keep for years to come! I don't care to send it in for cleaning and sharpening with Microtech's terrible return time... It's a hard use EDC for me and I could care less about snail trails and love marks. Great damn knife!
I have a troodon d/e, utx 85 d/e, combat troodon d/e, ultratech d/e, and Halo 6 tanto. I obviously love the double edge, why? I think it looks right and the wow factor on peoples face when it comes flying out is awesome. Plus if you have to use it in a combat situation it is possible to strike with the wrong side of the blade, in the heat of the moment. Obviously double edge fixes that situation.
You should do a video on dive knifes I have an aqualung titanium big squeeze only problem the mounting nuts need to be all metal to hold up I broke one on the dive boat
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Microtech UTX-70..AKA “The Wrong Juul”
😂
😂
I have an Ultratech in the bayonet style blade. Best of both worlds in my opinion. Sharp on bottom and on 75% of top with just enough space for your thumb on the top of the blade. Bayonet is an awesome blade compromise.
Waiting on my Cypher 2. Wharncliffe might be my favorite blade to edc
"This is the LUDT, we have a bunch of different variations in stock on the wbsite"
Ahhh, those were the days...
I feel like literally nothing is in stock anymore
@@kozmo7
Covid really screwed it up, and things were already hard to get from BHQ with popular knives even pre-covid. I haven't seen BRS balisongs in stock from their website in over a year. I admit I don't check every other day because that would be ridiculous, but when I remember, I check. Nothing in stock for ages.
BHQ is still one of the best to buy knives from, even with the low stock. Because if BHQ doesn't have it, no one else will.
@@P.W.R.
Thank you friend. I will keep hunting the good hunt!
@@P.W.R.
Nice Davie504 clips XD
AND THE JACKSFILMS?! That’s amazing. Good job, editor. Nicely jobbed.
Love Microtech. I bought an Ultratech, UTX-85, and a UTX-70 before I even knew what I was doing. I did end up with the hellhound blade on the Ultratech and I absolutely love all three of them. Of course I purchased them all from @BladeHQ Keep rockin boys 🇺🇸🔪💪🏽
Just got got my first microtech ultratech te and I'm thinking about doing the same as u now.
You guys and gals are the absolute best in the industry. Thank you for all you do Blade HQ.
Since it landed on "shave again" I think my boy with the Christmas Hams needs a sweet handle bar mustache.
We may have already scared him for life. 🤣
@@BladeHQ scarred** 😁😁😁
@@OsamaBinDarrel hahahahahahaha 😐😐😐😐😐
Just got my first microtech. UTX-85 and I love it
Dagger blades are great for cutting tape on boxes and opening packages. You simply don't have to change your blade direction when cutting a box open.
Tammy from the warehouse taught me something new. I did not know tape does not stick to ceramic blades, I will have to invest in one or twelve. Thank you, Tammy.
Hi Blade HQ! I'm actually from San Jose CA but thx so much for featuring my painting this means alot to me! Definitely gonna keep watching your guys videos thx again and Peace out!👍😎
I love BHQ, i haven’t received any stickers as of late 😢.
Just bought a warhound ultratech I cannot wait til the end of the week for it.
"so yeah we're calling it The trow-uh-don"
3 seconds later
"So the true-don"
4 seconds later
"Yeah the true-uh-don"
yeah, first he says "we did some research and it's actally trow-a-don" then he incorrectly corrects the other guy and says "true-a-don". Derp.
It's correct pronunciation is trow-a-don (like the dinosaur)
I have a Microtech LUDT Automatic Knife Tan (3.4" Stonewash) and I love it! The quality of the knife is just awesome.
I do EDC my ultratech dagger and I like having that point to piece anything you may want effortlessly, as well you basically have 2 blades in one hand you can cut up or down and I'd one sides a little dull from use the other sides probably got a little more edge to get the job done.
🥃cheers🍻
I carry a dagger blade every day. I have a Microtech Ultratech in Violet with a 204P dagger blade. When I bought it, I didn't think I'd really like having a dagger that much, but it turns out I use it every day at work. A very large portion of my job is receiving freight, guns, guitars, parts, tools, whatever. When I'm using it in my day to day workload, there is actually something to be said for not having a dull side. You stick your knife in the center of a taped edge and you can cut both directions without flipping the blade. I realize I might be a bit of a niche case, but I absolutely love my dagger bladed knife.
Love dagger blades. You have two edges to use. Comes in handy more than you think. I have the troodon, ultratech and Dirac. All in daggers, all in my edc. But also love my combat troodon with the hellhound in bronze coating and carbon fiber front scale
You guys are what's great about youtube!
Still deciding on my first Microtech OTF purchase.
As a bearded guy, I’ve never been so happy to watch another man shave his leg 😂
ALWAYS Appreciate Hearing Pricing Information - Thanks Bro's !
For the wheel: Prepare a Halloween Pumpkin using a Victorinox classic.
You guys are the best show on you tube period! 🔥🔥🔥
I like the dagger blade as an EDC. One edge is plain and the other fully serrated. I like this setup better than traditional single edge combo blades.
I’m late to this video but in regards to the dagger blade. I like them strictly for appearances. I don’t mind them for EDC but it’s not my go to for EDC. I had a dagger edge micro tech and just found sharpening it to be a little annoying trying to line up the bevels perfectly at the tip
*me still watching knowing damn well I'll never be able to afford a Microtech*
me watching knowing damn well I could never legally own a microtech
@Nishan so sorry for you :(
I was just about to say that
Same bro
California sucks I can only carry Kershaw flippers
Just got my Ultratech from you guys today, love the channel, love the customer service and shipping even more guys. Definitely gonna be skulking around for a Microtech bounty hunter or Rhodesian to pop back into stock.
New task for the wheel:
Make a music with knife clicking (like that Nike basketball commercial). That'd be rad. 😊
This !
Legit the best part of this video.. is when Davie showed up to say epic... And just because of that.. i paused the video.. wrote this comment.
And because of that... You instantly earned another like
Kurt, the Smoothest Viking of the North! Greetings from the Dutch Viking!!
I have an OD green with Bronze hardware UTX-85 dagger blade. I love a dagger blade!! It is so great for nothing at all but man does it look great. I carry mine all the time.
I love a dagger blade, it’s the same price as a single edge, so you get twice the cutting edge for the same price. It’s more value.
Looks less unique& cyber tho
My only druther with dual edged daggers if that even in states that allow for the carry and use of OTFs/Autos they have rules against dual edged dagger blades. Iirc, Virginia is like that. I prefer bayonet style blades for that reason.
I have the Ultratech with the dagger blade as you call it. No serrations just dual plain edge.
I purchased it while I was in the service. It was purchased as a purely defensive knife.
Absolutely great knives. I own several auto's including a pre Blackhawk Masters of defense which is another great knife , the folding blade doesn't deploy as fast as the Ultratech. I own a Gerber tanto blade I believe it is a 06? It was what was suggested when I joined the service. But shortly after picked up the Microtech ultratech. And I also have a fun little Schrade mini extreme. It is fun to deploy and has a lot of snap. The problem with it is that the blade doesn't always snap into lock position. I just purchased a Benchmade Infidel. I think I am going to like it a lot.
Anyway for knives that can take a real beating and still perform would have to go to my Gerber and my MOD.
My dream knife is a G&G Deadlock..
I carry 2 knives. One dagger for fighting, literally no other use. One for everything else. It was an Ultratech for a few years but i figured the one on my multi tool is good enough. Great knives though
Damn.... have you poked something yet?
I wish the Microtech Stitch would have made the list. I love my stitch. The blade shape hits on so many levels. Stout blade stock, super pointy tip and a great grind. And of course it fires like a Microtech.
Obviously this should be on the wheel: Halloween pumpkin carving
I just got done playing with all 3 sizes at my local shop and you truly need to put your hands on them to truly make a decision based on your grip and EDC needs, the 85 is the same size as my Kershaw from years past the full size ultratech is not much bigger and is a good size in the hand the 85 again is the same as my EDC of the past 10-15 years and the 70 is the smallest practical EDC I'd consider it is very small in the hand but has a very comfortable feel and is easy choked up on wen out and all but completely disappears in the pocket and yes I tried all of them in the pocket just to get a feel for what will be my new EDC for the rest of it's/ my life... I think I'm going full size and then 70 latter on and skipping the 85 simply because the 70 and it's full size module are exact clones in a 70% scale where the 85 had a slightly different screw layout and I'm just that OCD 😉😉 good luck to anyone in the market and I really hope you can find a local dealer to have that hands on feel you really need to appreciat what your hand and pocket are really going to want after all it's a large investment in a knife especially if your like me and spend less then $100 average ever 5-15 years as you lose one or brake it lol
🥃cheers🍻
Think you guys should put davie504 channel in the description for using his clip
Was looking for this comment😂
Shut up bro
I thought I miss clicked on one of his vids and was like huh?
Hahahah that is funny as hell. The leg shave
What's up slappers
Kirk you are a better man than me! Hats off my friend!! Hehehe... Honestly I just can't unsee it now... Straight UP, Blade HQ owes you a FREE knife of YOUR choice from their inventory - - - NO EXCLUSIONS!!!
I've only ever carried my Halo VI as part of my wedding attire because I needed something classy to go with the classy tux
I think you're full of shit and don't even own a tux
@@Blazerghost sounds like someone's jelly
@@JustSumGuy01 Yeah totally lol. I have 5k in knives.
@@Blazerghost good for you.
@@JustSumGuy01 It is.
As a fellow big bearded dude, Kurt's shaving segment had me laughing so hard. Keep up the good work.
Microtech puts out some incredibly awesome/badass knives. They look really sweet and their quality is the best. Unfortunately, most people (like myself), can't afford to spend that much on a knife.
Yeah they are sweet and pricey, I couldn't help it though and got my first and probably only utx 85 for a Christmas present to myself last week. It's frickin awesome man, although I'm thinking I should have gotten an ultratech because it's pretty small and needs a longer handle
Says the guy with 10 Benchmades and 20 Spydercos
The knife that has been clipped to the strap of my backpack for the past 4 years is my S&W HRT dagger ,it was only $20 and like I said has been with me every day for the past 4 years so that’s my true EDC. It’s not a good knife to throw in your pocket but when it comes to self defense blades there’s nothing I’d rather have then a good full tang double edged true dagger. Mine has hung upside down on my backpack and never fallen out of its sheath but it’s also quick and easy to deploy.
So Kurt's a cyclist now
Riding into all of our hearts full speed!
@Doran J, swimmers 🏊 shave their legs too.
@@steveo6685 Protech SNG Operator?
@@steveo6685 assuming that’s the one you were looking for?
@@steveo6685 all of the Protech operator knives do I believe
Just ordered one from your website. Can’t wait to get it in my hands!
I love you videos!!!! Just wanted to say yall are doing awesome. 😁
I have always carried a boot knife or even a full sized dagger as my combat knife, and as a self defense role after I retired from the Army. When you are using a knife to try and save your live you want to go straight for the kill and clothing and equipment can impede a knife's stabbing ability. I know it sounds violent but it is what daggers were designed to do, dispatch the enemy as quickly as possible.
Why no love for the Exocet? ... It is constantly in my pocket.
It's a great one just not in the best of the best yet because it is so new. We bet by next year it will already be a classic.
I have one on its way
I EDC a dagger troodon and it does well for EDC. The utility of the blade style is nice. Havnt had to defend myself with it but given the durability from all the every day stuff it tackles I'm sure it would hold up well. Just glad I live in a state I can edc a otf knife without bullsh!t harrassment.
That leg shaving scene was horrifyingly hilarious! 😂 Atta boy, Kurt!
Dagger blades are my fave tbh. My edc is a combat blade because I carry for self defense purposes.
The noise he made when he looked at the hair on the blade 😂
Thats why I like bayonet style blades so much cause you essentially get a dagger blade but with that safe thumb spot
I love the fact that Kurt would rather shave 1 leg than touch that beard. Just think how much better the National Knife Day video would have been with smooth legs😂
Lee Graven lol
I love dagger blades, Ordered a 80$ MTN OTF knife off amazon China high quality I LOVE it ! Highly recommended ! 5 star rating . I’ll buy another !!
love my ben blue tanto ultratech.
Love Microtech Knives. My EDC is a Dirac Delta w/ Apocalyptic finished dagger blade in 204p
Lol, poor Kurt, you can definitely see those cuts on his leg right when he's finished.
@Blade HQ y’all should do a knife banter on different balisongs (butterfly knives).
Not gonna lie, the leg shaving was a little scary and he got a little too into that. 😬
Dude.
Seriously.... yuck
😶 ya
you guys didn't chub out? no boners? what're you, gay?
I want to thank u for this video. I have been fabricating my own switch blade but I was running into some problems. however your video has so far been the most helpful video that I have seen. you did a great job explaining the mechanics of a O.T.F knife.
DO A VIDEO ON DAGGERS OR BOOT KNIVES :)
I’ve had my Troodon since 2014. Used it while in the Military and held up like a champ. Other than cosmetic degradation, the thing still fires like new. Like anything else as long as routine maintenance is kept up you shouldn’t need another blade for a while.
Is tearing into it needed or just the rem oil?
17:50 I thought they were going to give one to him, but they just told his mom to get him one. Stingy bastards 😂
Love microtech. As a SAHD UTX 70 with the drop point blade is my edc diaper knife.
Wheel of indecision: eat soup with a knife
whisper into asshole
LMAOOO
So my EDC for work is the Socom elite manual. When I’m not working I carry the combat troodon with the dagger, partially serrated blade
Wheel of Indecision: Throw that UTX at a wooden target and make is stick!
Actually lol’d at the shaving skit, haha. Great work guys, huge fan from Texas!
Add “fruit ninja” to The Wheel of indecision
I have had a Combat Troodon for s bit now. Black on black double-edged dagger blade. Awesome blade!
I miss my microtech.. i traded it for a lower price on a handgun lol
Waa the gun a hi point
@@nocturneraider glock 45 actually
@@tuckerrichardson2606 good because if it was a hi point you got screwed
@@nocturneraider oh not at all lol
You didn't deserve it then. Good trade.
The leg shaving is something that I cannot unsee...and i really want to.
For the wheel: Gut a fish
I EDC a dagger blade when I'm not at work. I carry either my infidel or autocrat. The convenience of an otf as an EDC is amazing.
Please tell me that Kurt earned a Mermaid!
I always pronounced it troo-uh-don.
Have one, single edge, and LOVE IT!
Definitely in top 3 knives I own
I carry a ultratech dagger blade edc and I usually have a kbar ek-44 on my belt. It's just my personal preference. I can use them for self defense and if one side gets dull I always have another one.
I carry UT and LUDT daily love em both
I've only carried dagger style OTFs as my main intention when carrying an automatic is self defense. Not use particularly. Hence my love of the "glass" breaker 😘
This is actually my issue tho. Given how expensive they are, I haven't had much chance to experience their different blade shapes.
For whoever's is reading what do you think the best combo of defense and carry would be?
I like the idea of the dagger eith serrations only on one side. But it still leaves the problem of blade strength kind of (not as much with the high grade metals they use but) and safety of having a double edge.
Any ideas?
Spartan seems great for self defense too
I like the way you’re thinking; I for me one of these OTFs would be used as EDC and other utility work, good for defense, and the glass breaker would be good if you need to get out of your vehicle and opening the door isn’t an option. Of course, you could always use it to to break other types of windows if you’d need to get out of the house.
I have to say the shave was impressive! Super sharp.
Just got my ultratech yesterday in black with an apocalyptic dagger blade and I love the action I just wish it was a little less stiff
Such quality in microtech. Beautiful
I carry a double edged cypher with full back serrations and love having a full clean edge and a completely serrated edge for different tasks but mainly self defense. Having the piercing power and the ability to not have to worry about if my edge is facing the right direction if I dropped it in an emergency situation.
i like the dagger because that way i can cut the tap up a box or open mail quicker.
Thank you editor for using jacksfilms! 11:14
BladeHQ and jacakfims my two favorite channels.
Dagger blade with one side fully serrated and the other edge plain is where it’s at!😎
I love my Combat Troodon with a dagger blade. When I press forward, the serrations held to keep your thumb on the switch and I hold my thumb on it
You guys should add Cardboard fort to the wheel! 😆 I'd love to see y'all get creative with that!
The reason I love my ultratech with a D/E dagger is because one side is fully serrated and the other is a straight edge. If I need to cut through something extremely tough like a seat belt or tough thick rope quickly, I'll use the serrated edge which will cut through like butter. There is a test online to prove what I'm saying. Not to mention, the stabbing ability with a dagger is greater and there is also twice the cutting edge on a D/E dagger than S/E obviously.
I have microtech ultrarech dagger and I like it because I have two cutting edges at all times.
Love to see microtech do a budget otf
I have been wanting a microtech for years now but they are so expensive...family always comes first...I hope I win this amazing otf...thanks guys
Well that was an interesting video to say the least! 😂😂😂 Leg shaving & knives! What a way to spend a Friday... Laughed my bunz off! Thanks guys!
Thanks for tuning in!👊
I like a dagger blade for edc mostly bc it gives me a razor sharp edge no matter what similar to a double bit axe. I never found myself putting my thumb on the back of a blade for edc so I never worry about it.
I absolutely enjoy my Microtech Ultratech Spartan Tactical. I removed the pocket clip because I holster carry with a kydex sheath and ulti clip... Fits perfectly in the watch pocket of a pair of pants!
I ordered mine off blade HQ but wasn't happy that on the site it was listed as M390 and when it arrived it was Elmax.
Still a great knife and it's been through hell and back with me. Used it to break a car window and pull someone out of a flipped car and just last week ran into a burning home to pull out a 3yr old little girl and hadto break a window to get out. It's become my daily after my infidel was stolen and I couldn't be happier with the smaller size still very heavy but it feels great!
A D/A OTF is the only knife I will carry besides a fixed blade when wearing gloves!
After having it for a few months I ordered a few more to keep for years to come!
I don't care to send it in for cleaning and sharpening with Microtech's terrible return time... It's a hard use EDC for me and I could care less about snail trails and love marks. Great damn knife!
I have a troodon d/e, utx 85 d/e, combat troodon d/e, ultratech d/e, and Halo 6 tanto. I obviously love the double edge, why? I think it looks right and the wow factor on peoples face when it comes flying out is awesome. Plus if you have to use it in a combat situation it is possible to strike with the wrong side of the blade, in the heat of the moment. Obviously double edge fixes that situation.
Studying Architecture and Engineering design and everyday at school I think about designing knives haha. Nice leg hair line you made there Kurt!
You should do a video on dive knifes I have an aqualung titanium big squeeze only problem the mounting nuts need to be all metal to hold up I broke one on the dive boat
Where’s one get a ceramic box cutter?
Utx 85 is my favorite microtech so far.