JOB's Lund 219 Pro V GL - Full Boat Tour 2021 (Lake Erie Crusher)
Вставка
- Опубліковано 6 жов 2024
- A full in-depth and detailed walk through of my Lund 219 Pro V GL walleye tournament boat for 2021 season. Please comment below with any questions or if you have any suggestions on things I might try different.
***WATCH, LIKE, COMMENT & SUBSCRIBE***
FOLLOW ME:
Website: www.job-fishin...
Instagram: / job_fishing
Facebook: / jobfishing74
Twitter: / job_fishing
LinkedIn: / jason-o-brien-31861b28
#JOBFishing | #LakeFishingCharters | #LakeErieWalleyeCharters | #LakeErieWalleyeTrail | #Walleye | #WarriorLures | #LEWT | #MWC | #BWWC | #NWT | #Lowrance | #ShimanoFishing | #LakeErieFishingGuide | #WalleyeTournaments | #WesternBasin | #EZEEStep | #Mercury | #MasterWalleyeCiruit | #NationalWalleyeTour | #Simrad | #TournamentBoat | #CiscoFishing | #OffShoreTackle | #NAPP | #PortClinton | #ProV | #Fishing | #WesternBasin | #FallBrawl | #Dubberts | #HolmanMotors | #LundBoats | #Weldcraft | #WalleyeFishing | #GreatLakeFishing
That is one well thought out boat. I love that rod locker!
Now that's a boat!! A dream of mine one day would be to own something like this or the 2175 Pro V Limited.
Thanks for the tour! Amazing!
Great boat nice tour
Thanks for visiting
Love your choice of Beer, really enjoy your videos
Glad you like them!
Such an awesome boat, im using a 90s lund 1700 pro v, love it but it's getting old.. mostly fishing saginaw bay or river, its definitely a great walleye boat, lacks storage but lund can definitely build the most sturdy boat
Couldn't agree more!
Nice job. Real pro. I wish my boat was that clean. You gave me few ideas for organizing my boat.
Thanks 👍
Great video, thanks for sharing your boat! Love the EZ Step, I ordered one for my Lund and can’t wait to pick it up in a few weeks!
Hope you enjoy it!
Just got a 219 same layout and color can't wait to take it out definitely a beautiful boat!!!!
Good choice!
Love the whole set up ,you have done your homework , hope you guys have a wonderful tourney season..Fish On
Thanks 👍
the lund gl series are nice rigs no doubt i've run a ranger 620vs for some time but my next rig will be a vexus dvx 22
Relly nice set up on your boat but I am just lovin that HUGE garage with all that space!!
I love it!
Awesome setup . Thanks for sharing some many helpful tips
No problem 👍
Nice setup!!!
Thanks!
Great job describing everything on the boat.
Glad it was helpful!
Love the vids and the audio is great and the music, just all around good
Much appreciated!
Very nice job of organizing your “stuff”
Thank you!
Heaven
Suggestion: a plastic whiffle ball bat…cut both ends off, helps when you need to whizz
Too Funny but an excellent idea😄
Great job Jay
any chance you can link what you used for your tackle storage ? love the idea !
Very impressive! Very well thought out! I’m curious what you do/did for a living😊
I work in the cabinet & stone countertop business.
Nice Work!! keep it up..
Thanks, will do!
Hey JOB,
Love the video, where can I find those planner board holders? Think they would work on a traxstech rail?
Erie Outfitters Tango BH6
JOB, where did you get that vertical 3700 rack that you modified? Thanks
www.walmart.com/ip/Organized-Fishing-Large-Utility-Box-Wire-Rack-14-Cap/17217211
Do you have a link for the planer board holders? TIA
Could you show me what kind of tackle box rack that you made for your boxes, the one you put in your boat.
I used a wire rack that holds 3700 boxes from Walmart...it has since been discontinued as a product.
Jason, where did you find that tool kit and 3700 rack? Love the organization. Just picked up a 2018 219.
The rack...www.basspro.com/shop/en/bass-pro-shops-utility-box-wire-rack?hvarAID=shopping_googleproductextensions&ds_e=GOOGLE&ds_c=BPS%7CShopping%7CPMax%7CProprietary%7CGeneral%7CNAud%7CNVol%7CNMT&gad_source=1&gclid=CjwKCAjw4ri0BhAvEiwA8oo6F5AdosSlPilAOAj5eNWXqM_slQrlXkRpaSeILkAnGlq5vnqBOZuwwxoCXM0QAvD_BwE&gclsrc=aw.ds
The Tools...www.westmarine.com/west-marine-marine-tool-kit-11140969.html?srsltid=AfmBOoo_E8nN7-B37tNgoyffEKaIQzPcmAsdVuaxQukJW5JdoYrl_FSDeMs
Those steps are nice, but could be a hazard if you bring your dog on the boat
Great video, first time on your site. Where are located out off
Port Clinton, OH
You are my OCD idol !!!! How is the ride in the 219 compared to the ranger, nitro, warrior. Currently have Lund Tyee aluminum - looking for glass on my next rig.
Well...with trim tabs added I would say it absolutely crushes Lake Erie biggest days. I can't really compare it to the others because I haven't owned the others you mentioned.
@@JOBFishing thank you good luck this year!
Do you have any pics of where you mounted the NEMA2000 and Lowrance boxes? Did you mount them under the foot panel? Did you install a Blue Sea fuse panel for all your Lowrance electronics and dedicate them to the single battery? What did you use for battery isolator for your 3 batteries? I currently have 2 batteries, but may add a 3rd as I'll be running 3-4 HDS12 Live units plus Active Target. As you can tell I'm rigging a new boat and you seem to have thought of all the things I'm wanting to upgrade from the stock Lund. Any info you're willing to provide I really appreciate.
They are both on the back panel under the starboard helm.
@@JOBFishing Do you know if the Cisco track will support down riggers since you're supported by the sportrac exclusively? I've read mixed reviews on if the sportrac can handle down riggers. Does Cisco make the mounting kit you used on the sportrac or was that a Lund product? Sorry for all the questions.
@@jasonberg3789 I would not recommend mounting down riggers in the Cisco Track they way it is mounted on my boat in the Lund Track. It would need to be screwed down to the gunnel. Cisco makes all the hardware to mount in the Lund Track.
@@JOBFishing Who makes the clips you used for the navigation lights? Did you flush mount your 3 in 1 on the step under the hull and glass in a 83/200hz transducer? I don't see a transducer board on your boat like I do on a lot of others.
The trim plates seem like a no brainer - why then are they not installed by the manufacturer automatically?
I agree that they should be. Maybe the thought is if your are only fishing smaller lakes then they aren't necessary??
Would love to fish with you and your boat
Give me a call and I can book you a charter...407-505-9151 or www.job-fishing.com
What replacement net did you buy for your stow master net!? Been looking for a while now and love that net.
www.jannsnetcraft.com/ghost-vinyl-replacement-net-bags-for-landing-nets/black-vinyl-replacement-nets.aspx
24"
Job! Just tried to install the 4" jack plate at the shop on my 219. It's a 2017. The mechanics told me they couldn't install it because their isn't enough slack in the wiring harness and Hydraulic hoses. Did you have to lengthen anything or did yours come installed from the factory
I had same problem and had to buy Mercury hydraulic extension kit along with the tool (electrical box thing) to bleed the lines on the Verado.
Very, very nice! What mapping chip do you use for your Lowrance units?
Navionics...
@@JOBFishing Platinum? Lake Erie and St.Clair edition?
Why did you go with the Lund 219 Pro V GL? I’m looking at one now and I’m wondering why you went that route say over a Ranger 622 or a the Vexus DVX22. I’m guessing you’re on the Lund Pro Staff so that would explain it, but I’m new here so maybe not.
At the time I purchased the boat it was the only one made without the cockpit side storage boxes. Also Ranger 622 and Vexus were not around yet.
Also it is the only one that will hold (6) D31 batteries. It is also heavier which really helps out in big water.
@@JOBFishing Thanks for answering! Really appreciate it. It packs a lot of value for sure to me. For the money, I think they’re a good deal in comparison to Ranger and Vexus.
will the kicker motor troll down to .8 mph or do you have to use electric for that? I have a merc bigfoot 9.9 kicker on my starcraft superfisherman 19. I dont have a front mount electric trolling motor. should i get one? which one? sorry such a pain i am
Typically anything under 1.5 mph I will only use the Motor Guide. The kicker will get down as slow as 1 mph. I would recommend Minn-Kota Ulterra.
What size are the Lowrance units on your dash? Will a 16 fit up there?
I have (2) 12" but with the right brackets I guess you could put (2) 16" graphs.
And also what did you use to mount your marine radio mic to the windshield?
RAM Mount
How & when are you using the 16" graph at the stern of your boat?
We probably troll 90% of the time on Erie so we are always facing the back of the boat watching planer boards...
when you are done with that boat please sell it to me.
What brackets did you use in the rod locker for your nav lights?
www.amazon.com/Command-Broom-Grippers-Holds-17007-HW2ES/dp/B01G1Y42H0/ref=asc_df_B01G1Y42H0/?tag=hyprod-20&linkCode=df0&hvadid=193136497623&hvpos=&hvnetw=g&hvrand=5775718979399216886&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015676&hvtargid=pla-360069421807&psc=1
What brand of rod socks are you using
www.rodsox.com/
Hopefully yours doesn’t split apart
So far this boat has taken a beating on Lake Erie for 2 years no issues...sounds like you didn't have the same luck?
@@JOBFishing I have 2 friends that had the same issues with there’s unfortunately but they got them taken care of. Glad your having great luck with yours !
What is AIS?
AUTOMATIC IDENTIFICATION SYSTEM OVERVIEW
Imagine a shipboard radar or an electronic chart display that includes a symbol for every significant ship within radio range, each with a velocity vector (indicating speed and heading). Each ship "symbol" can reflect the actual size of the ship, with position to GPS or differential GPS accuracy. By "clicking" on a ship symbol, you can learn the ship name, course and speed, classification, call sign, registration number, MMSI, and other information. Maneuvering information, closest point of approach (CPA), time to closest point of approach (TCPA) and other navigation information, more accurate and more timely than information available from an automatic radar plotting aid, can also be available.
Basically, I can see AIS equipped boats on my chart...
Hey guys. My fiance and one of my best buddys would like to go out with a guide. Do you have any referrals if you guy don't guide?
DM me on FB messenger...
i have this exact same boat (fish tournament Pickerel in Erie in August and Salmon in lake Ontario in summer) - same colour actually - sorry but your rig is too rear heavy - all this stuff helps if you are moving but when idle your bow sits up - way way too high.
When the live well is full I would agree it squats a little too much...
@@JOBFishing well put
@@JOBFishing saw the like now - needless to say I subscribed (not because of your similar taste in boats but ‘cause of content and your seemingly shared sub-clinical level of OCD) - keep at it mate - hope to see you on the water some day after this madness
What are the 2 maps you use in the beginning of your videos.
Navionics and MODIS (links are on my website at www.job-fishing.com)
Awsome boat what kind of money is that boat n gear worth
More than what my wife thinks...
What a stupid question.
grandpa always used to say if you have to ask, you can't afford it!!
@@duggaboy It’s not a stupid question. Everyone wants to know what things cost. The idea that cost analysis should be some kind of state secret is just stupid. It’s a fair question and helps get more people into the sport. If you have an idea as to what things really cost, you can start planning and saving to make that dream a reality. Knowing the actual costs gives you an idea if it’s something that you can afford or not.
@@downwitakrowdy My Grandpa always used to say find out the exact costs so you can start planning to make your dream a reality!
You had me until you said Rod Stewart. lol
Funny story...buddy and I were fishing out at the weather buoy last season and the only station we could get was Rod Stewart Radio...6 hours of Rod baby....hahahaha
Do you have a link for the Plano storage rack?
facebook.com/Tango-Fishing-462978337595396/photos/?ref=page_internal
@@JOBFishing im actually looking for the wire storage rack you mentioned that stored your plano tackle boxes in your front portside storage
@@joshhugel851 www.walmart.com/ip/Organized-Fishing-Large-Utility-Box-Wire-Rack-14-Cap/17217211