Hi _Wai_Wai no I’ve never removed that idler pulley but I have moved around those AC lines. There’s a screw in there with the spacer that you have to remove and those lines will move and you should be able to get to the idle or pulley.
Hey boss any idea on my fan . It’s only turning on when I disconnect the coolant temp sensor then it’ll kick it . Car not over heating and has a new pump . 2010 bmw 535i Gt
Hi Sean Carter get it scanned it could be thermostat or even coolant temperature sensor erase the code, and if it comes back on when you replace any parts, erase the code
@@Marty09933 I’m located in southern cali any ideas where to get in scanned right . I was told because my ac needs recharging the fans not kicking on .
Hi Fabri no check your water pump and thermostat sometimes that will cause your fan to go on high when they are going but check for any leaks of coolant
@@TheFabriXGames sorry brother the only time I’ve had issues with the fan going on high is when I have had problems with the thermostat or water pump. I have a few videos on that so your vehicle is not getting hot it’s not overheating?
@@Marty09933 can I replace the thermostat only? I test the water pump and it’s working normally but I’ve seen videos that says that I need to replace both together
@@TheFabriXGames if it’s not in the budget you can only do the thermostat if you want but they’re kind of a pain in the rear so I would recommend doing both at the same time but like I said if you can’t just do the thermostat that’ll be OK
Have you ever attempted to get the Idler pulley out? It looks like a real pain, since the AC hose bracket is in the way.
Hi _Wai_Wai no I’ve never removed that idler pulley but I have moved around those AC lines. There’s a screw in there with the spacer that you have to remove and those lines will move and you should be able to get to the idle or pulley.
is the tip you need to unscrew the main bolt on the tensioner a e12 or t12 ?
Hi Txddjames it’s a E12 thank you for watching I appreciate you
Hey boss any idea on my fan . It’s only turning on when I disconnect the coolant temp sensor then it’ll kick it . Car not over heating and has a new pump . 2010 bmw 535i Gt
Hi Sean Carter get it scanned it could be thermostat or even coolant temperature sensor erase the code, and if it comes back on when you replace any parts, erase the code
@@Marty09933 I’m located in southern cali any ideas where to get in scanned right . I was told because my ac needs recharging the fans not kicking on .
@@seancarter5821 just to a shop that specializes with BMWs they have more knowledge on European cars hope that helps
Mine is wiggling to much, is that the main reason my fan starting to go full speed?
Hi Fabri no check your water pump and thermostat sometimes that will cause your fan to go on high when they are going but check for any leaks of coolant
@@Marty09933 there is no leak but my sensor is not reading cuz the gauge is always at 140
@@TheFabriXGames sorry brother the only time I’ve had issues with the fan going on high is when I have had problems with the thermostat or water pump. I have a few videos on that so your vehicle is not getting hot it’s not overheating?
@@Marty09933 can I replace the thermostat only? I test the water pump and it’s working normally but I’ve seen videos that says that I need to replace both together
@@TheFabriXGames if it’s not in the budget you can only do the thermostat if you want but they’re kind of a pain in the rear so I would recommend doing both at the same time but like I said if you can’t just do the thermostat that’ll be OK