REPLACING STICKY DOOR HANDLES ON MY BMW F10 !!! | DIY TUTORIAL
Вставка
- Опубліковано 8 кві 2020
- Finally replacing the sticky door handles on my F10 after a year of ownership ! 🤣 I hope you guys enjoyed this video &' hopefully I was able to help some of you who are in the same situation as me!
eBay link : www.ebay.com/sch/i.html?_from...
Amazon link : a bit extra but comes with all correct parts !
amzn.to/2yaE1Bm
CHECK OUT MY VIDEO ON HOW TO JOIN THE GIVEAWAY GUYS !! GIVEAWAY WINNER WILL BE
ANNOUNCED : Monday April 13 !
STAY TUNED FOR OUR FUTURE VIDEOS!!
Make sure to like &' comment any video suggestions or any questions you guys might have!!
Follow the Instagram! @anthony.ulloa_ - Розваги
Very helpful tutorial. Couple of pro tips that were left out of the video: There is a gray plastic keeper on the door handle switch that must be rotated to the right in order to remove that switch. It is very fragile so be careful. It also serves to secure the switch in place when you reinstall it. Do not pry it outward, whatever you do. Also, when realigning the door panel along the top, be careful that you reset it so that the rubber seal is in the correct position. If not, you will fight to get it realigned along the top. Just make note of how it looks before you take it off, and put it back on the same way. Last tip, the four screws that are removed using the torque screwdriver are different lengths. There are two long ones and two short ones. Make sure you know which ones go back into which positions.
I appreciate this comment 😅
You gotta show us bro you just be taking stuff apart off camera show everything
Agree ! He forwards it all to the end
Lmao fr
doing it and recording by yourself is hard man.
Agree with others that just saying 'do this' and then magically skipping to where it's done makes the video pretty useless. A couple of key points. The top trim panel has the tab as mentioned but also has a hook on the left side so needs to be slid to the right to remove. Unplug the door switch is not straightforward, it doesn't just pull out, you will break it if you try that. There is a handle at the top that needs to be rotated down and to the front of the switch in order to remove the plug. As you rotate it forward it will push the plug out of the socket. Lastly getting the door card back can be a real pain. To reinstall lift it above the sill line angle downwards and wiggle it under the treble speaker in the corner. Then lower the other corner until it fits neatly into the slot. To remove the switch holder/handle don't use pry tools or you'll scratch the leather. Just push it out from below, enough pressure and it will just pop out. When removing the screws holding the switch holder there are two long and two short, remember which goes where when you take them out. Also when putting the new piece back in the door make sure the top is properly seated before trying to put the screws back in. If the top is not in properly the screw will go under and just push it out.
I did my driver side only and your process was right on the money and very helpful. I had the most trouble popping off the handle cover. Everything else went pretty much as expected. Thanks for this.
Thanks bro, I really appreciate this tutorial. II changed mine today, looks ,and feels so much better. No more sticky rubber getting on my hands. Took me and hour.
Tnx for the instruction. Did it yesterday on my F11 and worked perfectly.
Props on the video! I would let folks know the window plug on the driver's side has a clip that slides over the plug to get it disconnected. Aside from that, your video saved me hours of stress. Thanks, man!
Did it man... Good video appreciate for taking time explaining each, one thing to add on IF THE REAR DOOR HAS CURTAINS THEN NEED TO REMOVE THE REAR SMALL GLASS CURTAIN TRAY BY POPING OFF USING FLAT SCREWDRIVER AND THERE IS NO NEED TO REMOVE THE REAR DOOR LONG WOODEN STYLE COVER, THERE IS NO SCREW INSIDE
Excellent block of instructions, I recently replaced the ones on the front doors of my 2014 528i , Thanks for your tutorial !!
Thanks for watching 🙌🏼
Helpful video, showed it to my mechanic and had no problems switching it out
While I really do appreciate the effort and time taken to make this video, I'm a little bummed that you skipped the prying parts, especially for the rear manual side curtains. Yesterday I tried to remove them but they seemed a little too snug and I didn't want to risk breaking anything.
Sadly, I haven't found any other video on here that shows how to pry them off. Yours is the closest, but again, the actual scene is skipped. Despite my trying to pry them where you said to, I got nothing.
But otherwise, thanks a lot for the rest, I was able to sort out the front doors without issue!
Awesome man thanks for putting this out! I have to replace my front passenger pull handle (all other items are fine thankfully). But the cheapest I found that thing for was $139. So this kit at a FRACTION of the cost I get the 1 part I need, PLUS everything else for down the road when they all EVENTUALLY will get gummy and crapped out. Great find!
Glad I could help man! Thanks for viewing the video! 🙏🏻
Thanks. Very informative, made the job easy. Good stuff!
Nice...your video was helpful...first time I took off a door panel as a woman lol and it was a success....I switched my parts out with carbon fiber to match the black BMW 535i interior...Thanks for the upload!!!!!!
Thanks for watching 🙏🏼
Hey Anthony, I followed your video to replace my rotted switch cover too. Worked like a charm!
Glad I could help 🙏🏼
Great video! Very informative and it made my job that much easier. Keep up the good work!
Glad I could help 🙏🏼
Thanks for posting. Easy to follow along and didn’t take too long at all.
🙏🏼🙏🏼
Thanks for this video. I like that you show all the clips and screws. The only scary part of a job like this is breaking something or a clip, then you have to find a replacement. When someone makes a video like this we see where all the clips are and where to pry, so it makes it much less likely to happen.
Bro ! i just got my replacement after years of putting it off. thanks for the tutorial !
Great video! Thanks so much for taking the time to post it.
Anthony awesome. I did the driver side but I am having issue with passenger side switch and clips. How did you dis onnect it so fast
Great explanation and well explained.
Thanks. Very helpful vid.
Mine are nearly to the point of sticking (they don't do that yet), so I recently bought only front ones since rears were in mint condition, never been touched before. Driver door handle was the worst, passenger handle has wear. Once I will get a chance to go to a garage, I will do this job, looks to be rather simple (have done these things with previous cars for audio upgrades so I am pretty familiar with the door panel removal process, just needed that little bit of insight to not mess up in the removal process)
After 4 years am watchimg this video.. and BASICALLY its very informative video. as I own 5 series in Qatar which am facing the same issue of Sticky door handles and melted rubbers.. its really disgusting!
Removed the 4 screws on the back of the door panel but cannot figure out how to release the connector, and to fully pop out the plastic assembly without breaking something. Anyone have any insights, hints?
brilliant thanks, was able to complete my passenger door 😊
Thank you for the video. It really helps me understand what it takes to do mine.
Good video, really in depth with excellent angles
Thank you sir ! 🙏🏻
Good vid. Easy to follow. Thanks man
Great video! Thank you for the help!
Thank you for watching!
I got mine changed thnx to you.
Basically a good video that will basically help me to basically finally replace my door pull which has been sticky for basically about a year ;)
After I changed my door handles driver side master window switches are not working. What should I do?
Amazing vide thanks for posting
Very helpful thankyou!
Good video, thank you for taking the time!
That you for watching!
Thank you, mine has the same problem but thankfully only on one door
Easy fix!
"Guys" counter = 10 times in 1 minute and 30 sek. Good enough 🤣 Thanks for your video! Helped me a lot 👍
What color is your interior and what color was the door handle that u ordered
would you disconnect the battery before doing all this?
great video, thanks
if you buy a carbon fiber trim kit will it have these in tehre?
Great video, thank you 👌😊
"Basically" counter... hilarious 😂
Where did you buy the back piece? What's the part number?
You don’t realize how many times you say “basically” and “as you can see” until you record a DIY vid, great vid!!
Haha definitely, thank you!
Thank you for helpful video
I replaced my 528 handles but now the window buttons don't work and the mirror buttons don't work anymore on the driver side
Follow up question. I am seeing a lot of these kits out there that seem to have the larger rear switch covers. I know your 1st kit had those as well. Do they fit and just cover more leather or could you not get them to fit at all? Seems weird with a good amount of these companies including them.
Yeah I don’t understand that either bro they don’t fit at all the hole is too small for the switch cover that they provide
Oh yes I have this exact issue on my F10
Thanks bro! I bought the same pieces for my f10 but couldn’t find a tutorial anywhere!
Glad I could help bro! 🙏🏻
where did yall get all four pieces from? Bmw should compensate all owners and replace them no charge bc this is obviously a factory defect.. i replaced my driver side that piece ran about 30 bux off ebay
HOW IS YOUR HEADLINER?
Excellent video. I too have the same problem. Could you please tell me what Ebay store you got the kit
Thank you bro! This is the exact one I got. www.ebay.com/itm/173991231421
Once I replaced the nasty driver side handle, I was satisfied and I gave up 😂
Thank you that is very informative! Btw did you have to unplug the battery?
I did not unplug it
Mine is beige color, it has lots of dirt and dark stuffs on it. Just horrible. I might need to replace the handle also.
Definitely makes a big difference!
Great video, I just followed it. Worked great but my dumbass broke the gray lock piece on the connector, when plugging back in. Any idea where I can get the plug, or what the part number is? Thank you
Thank you!
Well done mate
Thanks! 🙏🏼
I can’t seem to find where I can order the parts & have the installing tools included. I purchased from the Amazon link but I don’t have the proper tools. Do you know where I could get these?
You should just need torx bro, you can pick some up at your local auto store or Home Depot
Awesome guy, gotta do that to my '13 5 Series. Gonna go with the carbon fiber kit @ $189. I like the way you didn't waste time taking off AALLL THE FRIGGIN' WIRES, just the ones that mattered, BIG time saver right there!!! I wonder if BMW ever corrected this deficiency with the melting rubber coating on these door handles?!?!?!
Did you cook Crack in your door handle?
Bro how long did this take? I found a matching bicycle handlebar wrap and wrapped my passenger handle. It actually looks nice and much easier to grab.
Without recording maybe an hour or so
Does the Amazon purchase come with all the tools to install? I purchased all the parts from Amazon for $70 and only the actual parts came without any tools. Thank you for your video!
For the most part yes, In the video I explain what other tools are needed
thanks bro
Bro I’m doing it as we speak and I can’t get the white clip detached frm the old peace help!!
Help ?
TY
Great job! I was just thinking about doing this video and posting. You beat me to it! I have the same Mocha Brown interior, but I'm thinking of swapping out to black handles.
I love the mods. Keep them coming and check out my F10 535i on my channel.
Nice bro! I’ll check you out!
Merci à toi mon gars
Thank you
merci pour la vidéo 🤝
Where is the "guys" counter? 😀Thank you man for the guide!
i believe this is common issue on F10 models? i have to replace mine too
Yes, most definitely
Merci so muche
My 535d f10 has the same problem
Easy fix &’ definitely worth it !
greAT VIDEO! :)
Have you had a problem with the vapor barriers inside the doors leaking rain water into the cabin floor?
Never had that problem
@@anthonyulloa4004 you should check it out. the problem is that the vapor barriers in the doors leak because the adhesive fails. water leaks into the cabin big time. research it on u tube . you may want to check yours out and reseal your vapor barriers. you will thank me later for the tip. soaking wet carpets are the worst.
Appreciate it bro!
Damn man seems like a lot of work, my driver side door has that sticky part in the door where I keep my change. Lol I really don’t want to take apart the whole door! Lol
Hm, not too much work. Just a little time consuming
Hey man sorry I’m late but would you recommend disconnecting the battery
You definitely can but you don’t have too
Thank you. I really struggled with the door pull trim breaking a bottom clip on each one I tried. Do you know where I can buy these?
Thank you 🫡
Where’s the link lol
Did you disconnect the battery
Not that I remember
Think you
Are you living in Florida, Texas or Arizona? I live in Ohio and do not have this issue?
I live in SoCal
Just cnt put the connector out. 😓
just gotta work with it 😅
Hopefully BMW fixed this issue on newer cars.
Yes hopefully lol, it shouldn't even be an issue to begin with
Oh hell no lol well I’m can’t.. hmm maybe I can but don’t want to do all that 😩 my 535 is doing this. I have black on black. May use some black tape somehow lol make it look pretty 🥴😩 lol mines just started so idk. Trying to think of something else that would mold around it. 🤔 Oh well.
What year is your car and is it a 528i
It was a 2011 535i
I added tape in 5 mins and the issue of stickiness was solved
Do the classic YT catchphrase count. “guys” count infinite.
Excellent instructions! It sure makes it easy when you see how it comes apart! Thank you for posting.
Glad it was helpful!
Bro if I did this on my own. I’d mess it up LOL
😂 you got this
Nice vid but there’s NO way I’m going to try this myself 😩
It’s not as hard as it looks!!
I can’t get the door switch connector off smh
Oh yeah those are on there really good bro just gotta pull hard
@@anthonyulloa4004 I’ll give it a try again sometime! Thanks
First turtorial where I see normal video how to remove handles. Tnx
No problem! 🙌🏼
@@anthonyulloa4004 there is no video how did he do that.
this video is for no one
How many mileage on the car ?
About 162k 😅
Inline Motorsports holy Lamaoaoaoaoa, u can always swap out the engine and what not tho so
Haha yeah bro I plan on keeping this car for a while so whatever happens happens you know but I been taking good care of her either way 🤘🏼
Wish me luck!
Thanks for the video! How long did it take to replace the drivers side? I've ordered the piece on Ebay, but I might be a little retarded to do it myself. Just wanna know how much I'd have to pay someone so I don't screw it up
Basically, I just ignore this problem on my 535 lol nobody says anything about it. Basically
Basically 😂 I’ve been ignoring it for the past year but I got tired of closing my door &’ getting my hand all dirty lol
Inline Motorsports I’m cheap af smh lol I squished sum receipt paper over that sh*t to the point that it’s molded into the handle 💀
@@chevyboa8950 😂💀
Dam. I didnt get any tools with my set of handles.