Wow perfect timing! I've been thinking of removing my isolators I bought for my GT so I can get that extra drop. I just picked up some steeda ball joints to lower the front even more. Should hopefully be half inch drop out back and 1 in in the front. Keep it up Roman!!
why dont you just cut the springs . i cut like a half of turn of mine and looks great by cutting the springs you could drop that thing to the ground if you want , worked like a charm for my 2000 stang
Looks like someone with an air wrench cross-threaded that lug nut on there. Good thing you found it! Look at Carlos gettin' down'n'dirty!!! lol Actually the car sits pretty nice bro. I would have left the isolators in the rear.
I'm rebuilding my 2001 SVT Cobra engine. I'm in Charlotte NC, We should meet sometime. its full bolt ons. BBK LTH+O/R H-Pipe+Borla ATAK - Orgasm Exhaust.
The springs already settled if you’ve already had them in for a while, you’re just taking the isolators out. And after watching that wheel assembly slam down because you didn’t jack up the spring, don’t make anymore how to videos.
I atleast didnt get squeaking... more of a loud bang when you hit a dip or pothole and the struts extend faster than the springs... its super embarrassing
Tip: spray undercoating in the spring beds before you reinstall the springs
Today and yesterday I binge watched all your videos
Always good to see a notification pop up for your channel 😎
Looks good bro. Definitely see a slight difference in the drop.
I’m sure your lil sis will be grateful with the all the effort you’ve put in this puppy your the man
Resonators*
Most people use like 2 layers of electrical tape and some grease as isolators so you won't have that thick rubber but also no metal on metal
She’s looking good man! A lot nicer with the leather seats too lol
Great job I'm new here but I like what you do keep up the good work
Where do you have your Front Jack to lift the car?
One day your channel will grow like crazy I’m just waiting on it
Abram Carrasco everyone just hates on mustangs cuz they don’t own one .. but I got one stashed in the garage as my secret
U could put electric tape where the isolators would be to help with any future squeaking.
Is that explorer you have in the garage a 5.0?
You got two nice lookin stangs man! I'm jelly
bro i stay in dallas! when are you coming?? where did you move too?
What are isolators?
What happened to putting coilovers on it ?
Nice one bro 🎬💯👌🤙
I ran no isoalators on my GT and never an issue or noise. Youll be fine.
One step closer to moving down here to good ol texas😈
Huge supporter
might sound weird, but what joggers do you have fam? i need to get a pair haha
No isolators on my 97 when i went with my steeda sports..
265 on my front and those thing prevent a shit load of road noise over bumps
V8 swap.
Looking good
I got H&R supersport springs on my 2v & people ask if I’m on coilovers. You should swap those springs for some H&Rs.
Wow perfect timing! I've been thinking of removing my isolators I bought for my GT so I can get that extra drop. I just picked up some steeda ball joints to lower the front even more. Should hopefully be half inch drop out back and 1 in in the front. Keep it up Roman!!
Bobeech 97 if you do just the steeda ball joints and leave the spacer off, you will lower it about an inch or more!
Should of did measurements would of been cool to see the drop . I did mine and got almost a half inch of drop
why dont you just cut the springs . i cut like a half of turn of mine and looks great by cutting the springs you could drop that thing to the ground if you want , worked like a charm for my 2000 stang
did you keep isolators after cutting springs?
Looks like someone with an air wrench cross-threaded that lug nut on there. Good thing you found it! Look at Carlos gettin' down'n'dirty!!! lol Actually the car sits pretty nice bro. I would have left the isolators in the rear.
Isolators are still in the rear. Only the fronts were removed.
Outro song?
🤣 you work on your shit like I do. Wing it
Makes me feel bad for buying a 99 gt convertible because it leaks all the time and its nothing but rain here in Dallas for a whole week
That sucks man. I was going to make down last weekend for TMI but it rained down. It’s gonna suck when I move back lmao
Gotta invest into repairing it it cost but long term I enjoy mines
Awesome channel
They make this tool called a Tape Measure…
Any 16 yr olds with a 99-04 gt or v6? If so please say what one (v6/gt) and of you could say the insurance cost I’d appreciate
I'm 29 and pay $60/mo for full coverage. These cars are old as fuck. Had it three years.
My mustang makes sounds like a old mini van everytime I turn
Think it's the rotors or tierod having same noise
Your power steering homie
I'm rebuilding my 2001 SVT Cobra engine. I'm in Charlotte NC, We should meet sometime. its full bolt ons. BBK LTH+O/R H-Pipe+Borla ATAK - Orgasm Exhaust.
Have videos on it??
I don't. maybe I should make videos on building it tho. hmm.
SkepticalVex make an exhaust video.
Hey, I'm in Charlotte also. If you like, contact me I would look to check out your car and show you my 03 GT with suspension mods
@@tonycappello my instagram is @aJason0
Guy must be tone def..
I hear those squeek's an rub's fr.
I wish you were close by me in Southern California So you Can help me or give me Advice on my 2003 Mustang GT 😭
V6 gonna need an LSD, really sketchy in the rain/snow
I’ve driven it in some heavy rains, It’ll be alright. Probably won’t see much snow so no worries there.
Would it kill ya to wash the car !? lol
you ever heard of signals
Mbn.. cant even afford springs for my gt right now.. looks and feels like a truck lmao
Love the car man. Just bought myself a super low 01 Bullitt and im doing a full review on it soon on my channel. You should check it out!
The springs already settled if you’ve already had them in for a while, you’re just taking the isolators out. And after watching that wheel assembly slam down because you didn’t jack up the spring, don’t make anymore how to videos.
man you need jack stands
Removing the isolators are is so amateur is it going to lower a vehicle do it the right way
Dont, i repeat, dont remove the isolators unless you want your car to ride like shit... trust
Notification Squad
I atleast didnt get squeaking... more of a loud bang when you hit a dip or pothole and the struts extend faster than the springs... its super embarrassing
Put some coilovers🤟🏻
Doing great 👍
The car needs a wash bro
Modding a v6? (The school children in the magic school bus) Caarlos!
I heated my springs and dropped her 2"
How has it holdin up?
Lmk I wanna do this to mine
Clean your garage
First again!
_Are your ded?_
invest in tools lol