Very informative. I rebuilt my carbs on 75 hp Yamaha by watching your first 3 video's. I couldn't wait till the rest of series came out but you got me on the right track. It runs like did 20 yrs ago. Thanks. God bless you and yours
FYI - my f60aet carby kit came with 3 different sized o ring sets. (The thickest for the airbox 93210-38MH3) The air intake side of the carb has a thinner but larger diameter o ring (93210-35M86) than the other side of the carb (69W-14561-00). Not sure if this helps...🤷🏼♂️
Great series. I didn't realize it was JUST posted now I gotta wait for episode 5!! :) I was curious about the carb rebuild kit. Do you need 1 for all 4 or would you need 4 for all 4? Looks like a lot of o-rings but not all the jets for example. I recently picked up a project 2000 T50 that I need to take the carbs apart and clean up. I wanted to order some parts ahead of time just to be ready. Thx
Did you ever find the correct part number for those o-rings? I'm about to do the exact same engine and would really appreciate the real part number thank you
Reeealy good video. i need help to find some used carbs for a f60 outboard because mine are almost destroyed and the brand news are very very expensive. If someone knows anything i whould be greatfull.
Hi thanks for ur knowledge I need u to show us how reassembly 4 stroke and how to you computer to detect the problem I will appreciate when u show that
![Yamaha 4 Stroke Outboard Engine Carb Rebuild Series [5] Installation, Setup and Testing](http://i.ytimg.com/vi/Oecq4pWND5o/mqdefault.jpg)
Looking forward to chapter 5. Thanks again.
Next will be a quick Segway to rebuild the fuel pump before the last chapter.
Very informative. I rebuilt my carbs on 75 hp Yamaha by watching your first 3 video's. I couldn't wait till the rest of series came out but you got me on the right track. It runs like did 20 yrs ago. Thanks. God bless you and yours
FYI - my f60aet carby kit came with 3 different sized o ring sets. (The thickest for the airbox 93210-38MH3)
The air intake side of the carb has a thinner but larger diameter o ring (93210-35M86) than the other side of the carb (69W-14561-00).
Not sure if this helps...🤷🏼♂️
thanks for your great video from Italy!
You’re welcome!
Great series. I didn't realize it was JUST posted now I gotta wait for episode 5!! :) I was curious about the carb rebuild kit. Do you need 1 for all 4 or would you need 4 for all 4? Looks like a lot of o-rings but not all the jets for example. I recently picked up a project 2000 T50 that I need to take the carbs apart and clean up. I wanted to order some parts ahead of time just to be ready. Thx
Did you ever find the correct part number for those o-rings? I'm about to do the exact same engine and would really appreciate the real part number thank you
Tried as I did. I did not.
Reeealy good video. i need help to find some used carbs for a f60 outboard because mine are almost destroyed and the brand news are very very expensive. If someone knows anything i whould be greatfull.
Did you try dropping them into an ultrasonic cleaner
How do you adjust the idle to make it rev a little more? Do i have to adjust the idle screw on all the carburetors?
posted in latest video in the series
@@delorean1 👍👍👍
My engine won’t idle. Only runs when choke is on at about 3/4
The engine has no choke. Your high idle setting must be off….
Hi thanks for ur knowledge I need u to show us how reassembly 4 stroke and how to you computer to detect the problem I will appreciate when u show that