Can you also please show a tutorial on how to tighten the rear suspension of ZERO9? Mine is so soft that when you step on it, it just compresses and no shock absorption is provided.
This video does not mention that on the Zero 10 there is a cable feeding the strip light on the front of the stem. If the cable is not removed it will be cut by the stem when the stem is detached.
Thanks for this video, I could tighten my suspension fork. But I had to cut the code for my front blue light.... Can you also let me know how to get and connect blue wire?
Hi do you know anything about windgoo scooters ? I'm trying to get to the back shock Absorber the spring to tighten it. A can't seem to get to the part from the back. When taking the battery out there's like a plate at the back looks like it's been sealed I'm thinking is the bolt there because it can't be anywhere else. Do I just break through that ?
I was considering purchasing the Zero 8, but your US Distributor RevRides, is impossible to get into contact with. I tried contacting them through their website, a few times and i also called their phone number listed on their Twitter site and left a voicemail. Go luck with your sales in US with your non-responsive distributor.
djgcue hello! Sorry for the bad response. Can you WhatsApp our hotline at +65 6745 7882? We will get him to respond ASAP. Or we will personally attend to you. Thank you for your patience.
@@RevRides360 No worries, I understand. I received your response and I appreciate it. So many e-scooter companies appear to have nice products but lack the service to support their product (due to many being startup companies). I now feel a little more comfortable with Rev Rides. Thanks again.
Hi what will happen if I didn’t tighten the suspension? I brought my zero 8 to the store where I bought it. They said nothings wrong but I’m hearing knock every bump even just slight pull or push the steering. My scooter is just 1 and half month only. Thanks
Falcon PEV hi thank you for taking time to reply. I checked the front wheel and it is tight. I have recorded a simple video, would you like to see it? Where can I send it? Thank you
can i do exactly the opposite ? i weight 50 kg and i feel like the front suspension is too stiff, can i loosen it a bit or i risk of losing the front wheel while i ride?:)))
Can you also please show a tutorial on how to tighten the rear suspension of ZERO9? Mine is so soft that when you step on it, it just compresses and no shock absorption is provided.
Abbas Maghazehi same
Same issue
Same issue. Are stronger springs available?
Following. Especially regarding the light cable along the stem and how to avoid damaging the cable.
@@deanlee4855 I wish i knew how to move that cable. Seems to be the only thing preventing us from changing or tightening the suspension.
This video does not mention that on the Zero 10 there is a cable feeding the strip light on the front of the stem. If the cable is not removed it will be cut by the stem when the stem is detached.
Do you have know where to disconnect this cable?
@@Pacjonek you need to remove the sealant and un-solder the wires from the strip light
Thanks for this useful video.
Thanks for this video, I could tighten my suspension fork.
But I had to cut the code for my front blue light....
Can you also let me know how to get and connect blue wire?
The easy way is the tie the two ends of the naked wires together and tape them up
@@FalconpevSg I see!
Thanks for the tutorial.
Hi do you know anything about windgoo scooters ? I'm trying to get to the back shock Absorber the spring to tighten it. A can't seem to get to the part from the back. When taking the battery out there's like a plate at the back looks like it's been sealed I'm thinking is the bolt there because it can't be anywhere else. Do I just break through that ?
What are these little wheels on the front side under the standing board?
Trolley wheels
Is what you did will stiffen the suspension? I am 200lbs and it bottoms out easily. Is there after market springs?
I was considering purchasing the Zero 8, but your US Distributor RevRides, is impossible to get into contact with. I tried contacting them through their website, a few times and i also called their phone number listed on their Twitter site and left a voicemail. Go luck with your sales in US with your non-responsive distributor.
djgcue hello! Sorry for the bad response. Can you WhatsApp our hotline at +65 6745 7882? We will get him to respond ASAP. Or we will personally attend to you. Thank you for your patience.
Sorry about the late reply. I am on a business trip in Singapore currently. Next time I will ensure I am easier to reach when traveling.
@@RevRides360 No worries, I understand. I received your response and I appreciate it. So many e-scooter companies appear to have nice products but lack the service to support their product (due to many being startup companies). I now feel a little more comfortable with Rev Rides. Thanks again.
These how to videos are great , how about a 10X tire change ... Please.
neal JACKMAN Do subscribe to our channel if you find our videos useful:) we will do the 10X tire change very soon.
@@FalconpevSg plese do
Hi what will happen if I didn’t tighten the suspension? I brought my zero 8 to the store where I bought it. They said nothings wrong but I’m hearing knock every bump even just slight pull or push the steering. My scooter is just 1 and half month only. Thanks
sharon27 check if the front wheel is loose?
Falcon PEV hi thank you for taking time to reply. I checked the front wheel and it is tight. I have recorded a simple video, would you like to see it? Where can I send it? Thank you
sharon27 hi! You can send it to sales@falconpev.com.sg
@@FalconpevSg if the front wheel is loose i.e. shifts slightly side to side, could the loose suspension be the culprit?
i have the exact same problem. did you solve it somehow?
can i do exactly the opposite ? i weight 50 kg and i feel like the front suspension is too stiff, can i loosen it a bit or i risk of losing the front wheel while i ride?:)))
same question
Hi,it’s possible to change the front spring?
Hey yes you are able to, do email us or whatsapp us for better support!
Why is there training wheels🤣
Those are trolley wheels not training wheels