Thanks for this video. I bought a yunbang front shock and am praying it goes on my ninebot max. I will report back. Five years from now we will look back at these problems and laugh 😃
Hydraulics mate?? Screw it on while it's mounted to a scooter and stand on it, use a big vise or any big clamps, use a ratchet strap. How is that a problem Thanks for the video tho mate. You took the risk for me😂 I was unsure of how they were built even tho I suspected them to be crappy but I didn't wanna spill fluid all over my floor 👌now I'm gonna upgrade the hell out of them cheers
Clamps are a thing for compressing. Just use two boards, one with a hole in the middle for the top and the other on the bottom between the forks and you can use as many clamps as it takes on the two sides of the boards. I think even ratchet straps might be able to do the trick, those springs are laughable. Hopefully you already figured it out by now. Plus, a press wouldn't work as well for this as you'd imagine. It's awkward when you can't handle the thing you're putting together.
I believe it is makes ride around 20% smoother then original fork, but before installation need inspect fork and add grease to insulate holes to avoid corrosion + need periodically clean and regrease.
The one that I couldn’t open in the one is from the same batch. It will go on. You will just have to get some washers I don’t know what size to straighten the wheel.
What a dissapointment and i mean your review....you cant even open the second one... Dont think your sharkset is better as a spring. The 2 little springs have more rigidy than one yellow big spring. But considering your skills for dissasembling you cant understand this logic
At this time I don’t. I would like to maybe add one in the future. I need to save up my funds. However, ginger on wheels did a external battery install recently. Go check him out :)
hola buenas noches spy de PERÚ 😎🇵🇪👍 puedes poner traductor en español a tus vídeos porfavor seria mucho más útil muchas gracias y son muy buenos tus video sobre el max G30 P QUIERO SABER SI VAN A LLEGAR A MI PAIS ESE SISTEMA DE SUSPENSIÓN O TU ME LO PODRÍAS MANDAR DESDE TU PAÍS ESE SISTEMA DE SUSPENSIÓN GRACIAS Y SALUDOS.
You are the best UA-camr about Max. Your video is very helpful.
Thanks so much :)
Thanks for this video. I bought a yunbang front shock and am praying it goes on my ninebot max. I will report back. Five years from now we will look back at these problems and laugh 😃
Good luck!
I added it and it did not fit perfectly so I had to improvise with numerous wraps of bare wire where the gap at the bottom was. Lol 😆
Love your videos man! Keep up the content :)
Thanks dude :).
Use a ratchet strap to compress fork :) Have to do that on Fox Forks on MTB.
Use ratchet straps to compress the springs then drive in the bolts
Pin that commend! +1
What i want to see next ??? But you know, Dan !!! A board whit the rear suspension !!! ;) Jeff
Haha I know. Damn your not gonna let this down are you? 😂
I now have a box that I can try and create a board stencil to check it out ha.
I think you could use a table vice grip to compress the fork. Else, large C-clamps.
Hello, thanks for the video, I would like to know what was the diameter of the tool you used to remove the screw??
Thank you for the vids
5 side bolt. Use cheaper china tube wrench 6 side and make with pliers 5 side.
Nice review!
as long for the second forks bolt, I noticed its pentagon thats why hexagon tools didnt fit.
I may have to invest in some pentagon tools lol
Thank you. :)
Hey is there a way to adjust how hard the suspension is ? I bought one but it barely goes down (it’s to hard )
@Scoot, Let's Go! Hi,can you please send link to that front fork for Xiaomi m365!
Hydraulics mate?? Screw it on while it's mounted to a scooter and stand on it, use a big vise or any big clamps, use a ratchet strap. How is that a problem
Thanks for the video tho mate. You took the risk for me😂 I was unsure of how they were built even tho I suspected them to be crappy but I didn't wanna spill fluid all over my floor 👌now I'm gonna upgrade the hell out of them cheers
Clamps are a thing for compressing. Just use two boards, one with a hole in the middle for the top and the other on the bottom between the forks and you can use as many clamps as it takes on the two sides of the boards. I think even ratchet straps might be able to do the trick, those springs are laughable. Hopefully you already figured it out by now. Plus, a press wouldn't work as well for this as you'd imagine. It's awkward when you can't handle the thing you're putting together.
Nut ist rusting so why not to spray some black paint on top of that after installing? It would help to protect
I don’t alter the products so that people know they should add protection on there.
Hallo, pls do you have Video on how to Install And extra battery an ninebot max? Or can you make a video about this ?
I really need it
Hey dude. I will see what I can do. I do need to wait for some funds before I can purchase this
@@ScootLetsGo ok thank anyway, I will be watching to see if you Make a video like that
So what is the exact tool to unscrew it?
Please help me 😅
Thanks, Good you work with your son. Keep it coming.
Would u still recommed this fork? Because its cheap and not Bad vs esparts fork
I believe it is makes ride around 20% smoother then original fork, but before installation need inspect fork and add grease to insulate holes to avoid corrosion + need periodically clean and regrease.
I was always wondering what would be inside 😁
Me too haha
@@ScootLetsGo does the suspension I got from you have the same problems, or are they fixed on the one I got? It’s still to cold to install here
The one that I couldn’t open in the one is from the same batch. It will go on. You will just have to get some washers I don’t know what size to straighten the wheel.
@@ScootLetsGo so if I install it, will I run in to problems? Or will it alle be okay?
When I tried to install I had a little problem with making the wheel straight. This is where you will need to add washers.
So how can i adjust the First one?
Look, the bolt have only 5 side 8:40 Min its a custom box ...
Hello,
Can you help me please. Where can i buy the cheapest battery for G30?
Are you looking for external battery. Or the main battery?
@@ScootLetsGo Main battery replacement.
Head over to Instagram and talk with me their. Yt won’t let me post a link here
Does the ninebot g30max fork fit to the xiaomi m365 :)?
Nope unfortunately not
The head bolt is 3/8 inches
Would you be willing to part ways with that first one for a small cost?
Are you referring to the one I took apart?
Yea! I have the tools and would love to have the opportunity to fix it.
You got Instagram? Link in description
@@ScootLetsGo i don't. Sorry.
Can always email :)
Is that compatible to aerlang 8
Sorry. I wouldn’t believe so
Hola,yo tengo el segundo amortiguador y no puedo desmontarlo porque no tengo una llave especial
Yeah the second shock absorber is a pain to open, I don't get what the measurement on that one is.
Yo mandare a fabricar la llave ya que tenia una que ariesgue para cortarla y sacar el tornillo para poder hacer la copa presisa
What a dissapointment and i mean your review....you cant even open the second one... Dont think your sharkset is better as a spring. The 2 little springs have more rigidy than one yellow big spring. But considering your skills for dissasembling you cant understand this logic
Do you have any intention of taking a video with an auxiliary battery? I want to learn. ex) 15ah+15ah 15+10ah
At this time I don’t. I would like to maybe add one in the future. I need to save up my funds. However, ginger on wheels did a external battery install recently. Go check him out :)
hola buenas noches spy de PERÚ 😎🇵🇪👍 puedes poner traductor en español a tus vídeos porfavor seria mucho más útil muchas gracias y son muy buenos tus video sobre el max G30 P QUIERO SABER SI VAN A LLEGAR A MI PAIS ESE SISTEMA DE SUSPENSIÓN O TU ME LO PODRÍAS MANDAR DESDE TU PAÍS ESE SISTEMA DE SUSPENSIÓN GRACIAS Y SALUDOS.
Hola. thank you for watching, you can certainly get thissuspension in Spain.
As for the Translation, I will have to try and work this out. :)
Hi 😁
Hey
7/16