10 Steps Painting A Room FAST and EASY
Вставка
- Опубліковано 6 вер 2024
- How to paint a room very fast. 10 steps to painting a room in 20 minutes. This is how we paint fast. Professional painting secrets.
Para escuchar en español simplemente elija el idioma en la configuración de video.
The #1 cutin video on UA-cam: • CUTTING CEILINGS. DIY...
The tools you need are here in my tool store:
3M handmasker: t.ly/zZrH
9" masking paper: t.ly/pQeU
Frog Tape 1”: t.ly/5LCw
E-Volution 18" roller: t.ly/qOVMn
1 gallon paint tray: t.ly/ld5JB
Premier 4-8' extension pole: t.ly/xaYf
Cover grip drop cloth: t.ly/tRzG
Hyde 5-in-1 tool: t.ly/rnweq
Caulking gun: t.ly/9RFF
Best Interior Paint Brush: t.ly/pv5V9
2 gallon paint bucket: t.ly/TaDI
1 gallon bucket grid: t.ly/cRMi
White dove roller covers: t.ly/B0W7n
3M spackle & primer: t.ly/ogmE
Ratchet caulking gun: t.ly/02Al3
Become a member of Paint Life TV: Join my channel to ask me quesions personally, have access to members only video, get a discount at Paint Life Supply Co. have early access to video before they are posted to the public, and offer suggestions for new topics to become members only videos. Join here: / @idahopainter
Disclaimer:
Due to factors beyond the control of The Idaho Painter (or Chris Berry), I cannot guarantee against improper use or unauthorized modifications of this information. The Idaho Painter assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Idaho Painter recommends safe practices when working on any structure and or with tools seen or implied in this video. Due to factors beyond the control of The Idaho Painter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from use or improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Idaho Painter.
Finally. A profesional painter who made a video geared towards a homeowner or an newbie. All these other guys are posting clips where they are using 18 inch rollers over floors covered with rosin paper or chip board.
In been a painter for 36 years. The steps you described along with the tools you recommend are perfect. Well-done
Thanks
I'm half convinced I just watched John Cena teach me how to paint.
lol
But can you see him
@@marquezmayanne3658 that was smart😂😂😂
Lol
Lmao right
From personal experience I would add four more pieces of advice: 1. Always have the client move their furniture. One client accused me of damaging a display-cabinet's contents and I never ever moved another piece of furniture for any client again. If they don't like that, you don't need that job. 2. Have the client buy and deliver the paint. There can be no discussion about "That's not the color I wanted." 3. Video every square foot of the job before and after so there can never be any discussion about the job quality. 4. Always and I mean always get the job-description and particulars in writing, signed and dated by the client. Absolutely get any change-orders written, signed and dated. Believe me, some clients have bad memories but some actually are out to screw any and all contractors. They think you charge too much so they want something for free. My last big client was dealing with dozens of properties and in his old-age couldn't remember what he told me day to day. He was a good guy but he was failing mentally. Having everything in writing saved me a lot of arguing. Painting, as presented in this presentation is a simple and pleasant occupation. Preparation is absolute key and taking your time is equally important. Never rush.
I think the video gives a good idea for a DIY paint job and your tips are great for those who will be painting for others. Always important to protect your own butt.
Man sounds like you've been burned a time or two
Lucky I'm just looking to paint my own house and not start a new career
edew
It sounds like you meet a very nasty and abusive people how sad.
Pro tip: put the screws from the outlet/switch plates back into the holes.
Saves you tons of time trying to figure out the size of the screws and you’ll never misplace a screw again.
Sometimes the different plates have different size screws.
Pro tip.. that's take way too much time.. pro tip it really isn't rocket science pro tip
Ty, that's a fantastic idea.
@@dmeyer6994 takes less time then hunting around for the right screw
@@davidbarroso1960 Yep, I'm a master electrician and even I put the screws back in the holes- every time. Good habit. Not difficult and you never lose a screw. Some plates can hold the crews captive and I keep those in the plates. Those screws do get lost, THEN it takes way too much time.
Tape them into the holes
I love how well you explained the whole process. I feel confident enough to do it myself. You got yourself a subscriber, thank you sir!
spd23racer hi
I am doing good
So good
Nice blood in blood out reference. Órale! Vatos locos 4 ever! Jaja
@@yec4044 vatos locos 4ever haha
I just realized I’d rather work an extra shift and pay someone to paint my room LOL and thank you and mr. Paint Man for making a great video!;)
And Thank you for giving people like me and him business 😂
@@lucasjensen4309 Just curious, how much would you charge for the average room? I just had my ceilings replaced, and the drywall dude left a layer of ceiling paint splattered all over the upper 2-feet of my walls. Now I've decided I just want to paint the entire house white (the walls are currently beige), but I don't have the money right now to hire someone to do it, so I'm curious what you would charge. Thanks!
@Todd m ayy I’m a metal fabricator as well.
@Todd m haha same here, we just closed. We’re painting two rooms today and then moving in tomorrow. Honestly the taping process is the longest part. Our walls aren’t super smooth either so im not worried about making perfect lines. But spending roughly 200 bucks on supplies vs paying 900 or more it’s worth it.
I’m selling my house & was told it would be $2500 to paint 2/3 off the house. Needless to say, I bought paint supplies today & I’ll be starting with my garage 😂
I am so ready to take this on! I am 62 and I just recently decided to give all my rooms a budget friendly makeover and update my house. And now, I definitely want to paint the rooms first before I start decorating! I had beck surgery quite a few years ago, but it left me with a very sore neck, so I will be a little slower at painting, but I will do it! Thank you for motivating me, really you have no idea how much you have motivated me! Thank you, thank you! Debbie
it sucks
😊I have really bad arteritis in both ankles. I'm about to paint my laundry room today. It's stepping up and down on my step ladder that will be the challenge. Your comment inspired me. Slow and steady!
Literally got a job interview to be a painter in Santa Monica and this video gunna help me act like I know what I’m doing lmao
😂😂😂
How’s it going so fat
@@mikeyyyy512 it’s going pretty well so far. I got my first check it’s beautiful out here, but what sucks is I got paint in my hair and had to shave my head so if u plan to paint make sure to wear a hat lmao
@@Cookie550127 yesssirrr my parents got a kennel built in their back yard and my moms paying me to paint it and I am not bad at it if I say so myself so I was thinking about getting into it how much do they usually pay you?
@@mikeyyyy512 currently getting paid 17 an hr
I love watching this guy paint, I don't know why, but watching him rock that 4 inch roller is like meditation. I'd watch an hour video of him just cutting in.
lol, thanks for watching John!
If your using lighter coloured paint on darker painted surfaces you'll need at least 3 coats. I'd recommend using 2 coats of a cheap white mat paint as a base colour, then let it dry and then use two coats of your chosen colour.
I'm finding this out the hard way.
Four coats never
So I'm 26 and new to painting. I just started for a company that has me inside and outside I enjoy it but I don't or didn't feel like I could be very proficient. Thanks to the Idaho painter I believe in my skills more and learned some valuable tips from these videos! Hey I needed this and I will continue watching, thank you so much!
Awesome, glad to hear, thanks for watching and supporting!
I always make my first step filling in holes with drywall mud or wood filler. By the time I have every thing else in the room it is dry. Then a quick sand and prime. Saves time.
Plastering should be the first thing before starting a paint work
@@burakbey1068 can you explain why? Sorry I’m new to paint I’m just trying to learn. Because he didn’t make it a first step in this video
@@teambentley4223 plaster first so it will take time to dry, meanwhile you can other prep work and prepare your paint etc. When the plaster is dry you can sand and start painting. Good preparation is the main key of expecting good result in painting job.
I know this video has been around for awhile but I wanted to share a great 5-in-1 tool tip. When cleaning up your paint rollers,
use the curved part of the tool! It will make it much easier to squeeze out almost every drop of paint from the roller.
Great description
You're my go-to guy on anything about painting. I have watched many videos over many years. And I've learned quite a bit.
But, I always patch walls before I do anything else. That way it's dry and ready when everything else is done and the room is ready for painting.
Also, I don't allow anyone to open a can of paint before they have a clean, wet, white rag. That way if there are any mishaps, Then you have a wet rag in a second. So as to not allow any spills, drips, or anything to have time to start drying.
Also, I always wet my brushes then slap out the excess water. This way they clean up easier.
Keep up the great videos I study them a lot.
I’m a painter and starting my own business, I always look for these kind of tips. Being clean is 90% of painting.
very thankful and the philippians verse was a blessing. thank you
Great overview of interior painting! I started watching all of your videos a few months ago and I'm now painting almost as good as a pro! My house is about halfway done (started in the finished basement) and prep time always takes the longest. Since I'm also painting the ceilings (same color), removing everything from the room is mandatory so adds a lot ot prep time but definitely worth the trouble. Using the 4" roller for cutting the corners is SO smart and also looks great. Keep up the great channel....and don't forget to put in God's Word! 1 Peter 3:15
You're painting the ceiling the same color? That's ok, but maybe I can provide some info why that's not typically done.
There's psychoacoustics, and there's another field known as psychovisuals.
The idea is to work with your human brain, and how it perceives color and distance/depth, and not against it.
The reason ceilings are typically painted white is that it "lifts the ceiling." The diffracted light makes it hard to notice where excactly the ceiling begins, so essentially you don't notice the exact height your ceiling is at. And for most people and our modest homes and rooms, ceilings are pretty darn low.
Painting the ceiling a darker color than white or an off white makes the ceiling appear low and ominous. You'll tend to notice there's a "big cover" just above you. Noticing the exact height of your ceiling adds a feeling of claustrophobia. Rooms start to look like tunnels and caves. Most don't like this. In a few rooms it can be great for a change of pace (kids' play rooms or spare room to watch tv/play video games) , but not for your entire house.
If your ceiling height is extremely tall, then you will want to consider the reverse techniques. Use a darker color, or perhaps install darkened beams (typically wood) to "bring the ceiling down." It makes rooms with huge vaulted ceilings or ceilings above 12 feet in height a touch cozier.
Hope that helps. :)
He really got me with that Philippians 4:8
I just saw that. Love it 🙌🏼
Thank you for this informative video! I'm moving into a new apartment, and I'm really considering painting my bedroom. This was really helpful in realistically getting a feel for the work that would go into painting a room on my own.
I always tape over the power outlets after removing the covers first. Thanks for your tutorial brother.
Yes
Yes
Thank you for your videos brother. Helping others learned how to fish. God Bless You and all those around. From Tucson Arizona.
In 1975 I was 16 years old...If only You tube was around at that time. Videos like this gentle man shared would be soooo helpful ...thanks for sharing.....Canada
Glad to help! Thanks for watching!
Im a pro Painter thanks to you.
Never have a complaint about my job, god bless
Thanks for the support Mario!
I just painted a room today by my self and it took me forever lol
Good job 🥳
😂😂😂 same here with my room
@@rethomazure thank you 😊
@@fredymelendez4773 we survived though didn’t we lol
All that matters is you did it, that's more than some people could say.
Great process video, thanks! Need advice for OLD SMOKE ODOR LEAKING THROUGH 1.5 YR OLD PAINT JOB - We bought a duplex 2 years ago and live in one side. Got the interior painted before moving in, and after 1.5 years during a very humid fall the place is getting worse week by week and we are both noticing health effects from third hand smoke. The air purifier's filter is even getting blackened from it, and the walls and clothes hanging in closets smell like cigarettes. We're looking at repainting the whole interior ourselves but *really* want to make sure we're doing it right. What products to use? The first job was bargain basement and he used crappy primer, crappy ceiling paint, and decent wall enamel. Will Kilz water based primer be enough, or are there other odor sealing layers necessary? Thanks for everything, your channel is now my go-to for painting!
Awesome tips and tricks brought to you by John Cena.
lolllllllllllllllllllllllllllllllllllllllllllllll......looks just like him!!!!
I can't see him
* Skinny Cena
@@PicyPoe This guy is roid free , cena is full of them. Cena is pampered this man knows hard labor.
This was a really good video. This was about as quick as you can make a thorough video on something. I'll be rewatching this a few times before I repaint my house. Thanks.
The fact that you posted philippians 4:8 was so incredible 😍 👏
Thanks Chris..thanks for sharing your expertise..especially loved seeing the reference to Bible verse Philippians 4:8 at around 5 min 40 sec into video!
You make it look so easy.You did a great job.Thanks for sharing.
Iv been a painter decorator 44 years now, most of my customers like a good job done with the quotes written, all including materials...
Costs way it depends on the square footage of there home 🏡
1-2 bedroom units are basic quotes, colors are also discussed and feature walls if mentioned by customers...
3-4 bedroom quotes are past over to customers listing ceilings, walls, doors and trim.
Some customers ask for a 1 coat of primer, left for 24 hrs drying.
Then 2 coat,s of chosen colors each at 2 hr drying periods...
Feature wall are extra time
Such as metallic rolled an diamond cross brushing on second coat finish.
Costs very as well and depends on how far the customer,s spendeture goes.
Large 5-6 bedroom with 2 bathroom size home, well that's more material,s and time put in the planning of prep and painting ceilings and walls with trim and doors throughout...
14 doors and frames with trim are quoted separately $175 triple coating, per door and frames that's 1 good prime and 2 top coats.
There is lot of preparation work such as removing the doors and sprayed separately outside the house in beautiful weather conditions...
Prep and painting a house is an art,interior and exterior gives the customer a satisfaction knowing that he or she paid for a good job and bumping up there value on the home also...
Better for health and comfort 😌.
$8500 should cover materials as well for a standard 3-4 bedroom house...
2 bedroom units are around $5-6000 dollars.
5-6 bedroom home,s with extra bathroom,s quotes are around $13.500.
Depends also on the condition of that person's home with the day to day elements...
Surface washed should be included with the complete costs, your guarantee is in quality of the brand of paint and material,s...
You want the best work you pay for the best painters 🎨
Signed stv 44 year painter and decorator...
Cutting in afterwards only works when you use flat and some products in satin, if you use semi or gloss it will flash. Darker colors need at least 2 coats of cut in and will flash if you don't cut in one wall at a time and roll out(same with semi gloss and gloss). Basically this technique only works with lighter neutral colors that are flat or in certain products satin.
In my opinion it’s best to do two coats of cut in with any sheen unless previous paint is nearly same color
u sound like some dip shit in the paint department at home depot
what about ermals satin can you touch up and re cut in with that?
ya I was like whaaaa... safe to cut an roll as you go.. 2 coats of both.. and NEVER use Behr lmao
@@shawnrumbaugh6300 why not use behr? Ive been using them since 2016 and never had an issue. Ive painted multiple times using their premium, ultra and also marquee. Never had an issue, and it has a nice grab to the wall. You can even try to scratch it with your nail
This is so helpful. The scripture was even more helpful! And right on time. Philippians 4:8 ❤
You do it the right way Chris--with pride. If you want to keep your residential clients, that's how it's done.
I'm a qualified painter and decorator in the UK and I still found some of these tips useful
i love this tip
Philippians 4:8
New International Version (NIV)
8 Finally, brothers and sisters, whatever is true, whatever is noble, whatever is right, whatever is pure, whatever is lovely, whatever is admirable-if anything is excellent or praiseworthy-think about such things.
I was always taught to do cut in first, then roll, then cut in again, then roll again. I like your technique so much better! I was also taught to roll in ‘V’s & W’s’. Clearly I needed to find this channel a long time ago! Lol Great tips! Thank you! I definitely subscribed!😀
Awesome! Thank you!
?
Really helped me but I would never run a vacuum blowing exhaust near wet paint. ??
True, although, many have hepa filters and don't exhaust much air flow. The air flow is mostly occuring in the bag or canister.
He probably brings his own vacuum which is fine. He has to vacuum right then and there. No ways around it, really.
Always enjoy your videos. And most important your preaching.
🤙
More tips: to avoid flashing 1) use flat paint 2) cut first 3) paint top to bottom without overlapping. Thanks for sharing!
Cut first is worse! Wall -cut-wall-cut!!!
i was wondering the same thing.. why not cut in first... maybe its a preference thing?
If you cut in first then roll your walls, you will roll over the brush marks from the cutting in an have a nicer finish around the edges.
@@davex2614 Nicee bro! exactly that.
@@davex2614this guy rolls his cut with a four inch after his his brush work so he doesn't get brush marks. Don't know about the one coat thing though. Didn't see him cut twice
Love how you fold your drop clothes paint gets through so easy but they don't tear which is good
Thank u for the scriptures very encouraging to see🙂
Thank you for watching Rod! God Bless!
@@Idahopainter good life paint sir how to apply in other country im painter in the phillipines 7 years experience
im a boy 32 years old
Apprentice painter here these tips really helped out a lot. Thank you !
OMG I love your videos you've made my DIY life so much easier. Saved me a ton of money! Keep the tips coming
Awesome! Thank you!
Great job. Working for the glory of God. I work at a plant. Industrial work. Your videos give me confidence to paint.
hands down the best and most helpful youtuber when it comes to painting videos and giving tips he actually goes through each step and explains what him and his team are doing and doesnt speed through the process giving no helpful info like alot of other painters vids ive seen.he actually cares about shareing his tips an skills and not trying to be cocky and show off like alot of other painter vids ive seen.thanx for all the tips bro.#idaho painter national supporters union! another name for his subscribers.
This guy is a professional. An expert at his trade.
Man you are the best. I guess you don't take for granted your high skills. You always go out of you high level skills, to help the lower ones. Thank you
You just busted an old myth that you have to do the cut ins first and foremost. Now I know I’m doing it right after all. Much appreciated, and thank you for all your advice.
Nice
You have taught me a lot about painting over the years! Thank you!!
Great video. Thanks for really quick run down on how to paint and the tools and preparation needed. 18 inch roller is the key to do it fast
Thanks
Also they don't use ladders because for higher ceiling ladder may not be able to reach, like pent House or 2 storey bungalow. They use up to 4 x elongated aluminium pole, and you don't rolled and cut in. This is a mistake most professionals do. You cut in first then roll as the thickness of paint on roller and brush is different. After rolling then cut, you might see the lines of the brush.
Wife and I were bubbling around trying to get painting our house and found your channel. Been binge watching and learning and and also subbed. Great content thanks so much.
House Painting is HUGE all over America and helpful when you want to sell it.
THANKS FOR THE GREAT VIDEOS!!! cut in AFTER rolling?! Everywhere else I've seen say do cut in first. The roller goes into / over the brush marks for a more consistent look? You do say to cut in 1x when possible, So the 2nd roller coat will wind up covering the brush marks I guess.
Great point!
Thanks, this was really helpful. We liked your verse :) Att: My daughter and i
So many details left out but it is a quick simple video that will convince people they can do it themselves. As a painter and company owner, I see alot of homeowner paint jobs and they def need practice. Knowledge of steps and tools is only the first step in the school of painting. For example : The correct type of finish for the paint product and the correct primers and correct applications for the primers. Also maybe I missed it but I did not see the sanding of the walls. Either way this is a cool video.
Ceilings first is a rule. And Always cut in before rolling. you cannot caulk then just paint straight over it lol it will craze and split.
A Jay
You are correct but as u can see he does cut ins with brush then uses a roller I tried it and it is very smart for speed and same outcome try it before criticizing.. but ceilings go 1st no matter what
yes.. a jay ceilings first 2 coats then walls always cut in both coats . caulk will craze as you say.. due to certain things taken out of paints these days, health n safety . a coat of zinsser over the top sorts it out though
Saji Vs he’s not criticising he’s right, never roll then cut. Always cut then roll because if you roll then cut you will see the streaks of your brush quite obvious. You don’t won’t that
I don't know where to buy caulk, I went to hardware store and the people just laughed at me when I asked if I can see their caulks
This was great and simple to watch. Learned about cut ins and numbers of coatings which will help me finish my room. This is going to save me a bunch of money of having to hire a professional painter
Very useful info. I will use your advice when I'm painting my house. Thank you.
can i hav your whtapp numb
i hav some question to ask
2/16/2023. Yup you vacuum, yup I’m still watching ! 7:30 am Indiana. Still got good material brotha!
Thanks
"I don't need an 18" roller so I have a 9"I have my 18" roller so I can go faster.
Yes
also “i’m painting this room by myself” and some random dude comes in to help.
Lol I got the joke mate
Thank you ! Today I will paint my sons room .. first time ever lol .. your video is very help
I’ve been a professional decorator for over 10 years and have never, ever come across anyone roll before cutting in and especially not double coat the walls but only cut in with one coat. Confusing but interesting to see how other do their thing. If it works for you then great but I’ll stick to cutting in, roll, cut in, roll.
I was just about to ask. Why didn't he cut the corners first
Hey GENIUS DECORATOR....try watching and LISTENING to the VIDEO. They do a LIGHT SKIM COAT FIRST then cut in HEAVY. Then a second coat THEN THEY GO BACK AT THE END AND CUT IN AGAIN WHEN NECESSARY. See 9:00,
I do the same in the video. Reason being 1. cutting in once usually equates to rolling twice, as in regarding paint coverage. 2. It saves time doing this method and then touching up in needed areas afterwards.
Well done videos. He gets right to the point and explains every step, without any techno music.
Thanks
thank you for your videos. God bless brother.
You are welcome!
Aloha looks great ! I am following these steps today 🎉 Taking a quick break then on to my first coat & cutting* have a nice day !🌺
Hello from Canada! I love watching your tips and tricks!
I have a question! The previous owners of our house had wall decals and stickers on some of the walls in our new house. Unfortunately when they moved they peeled off the decals and stickers and left behind a mess, some peeling off paint and the top layer of drywall, while others left behind the whole back of the sticker and all the sticky residue. I have purchased a product to help break down this sticky residue, and a lot of elbows grease later the walls look, well Okay-ish 🙄. So here is my question....what can I use to wash away this oily mess the crud cutter product left behind before I paint?
I always cut first and then paint but after seeing this I will change. Also, like the big roller and tray so will purchase one. I have rental property and hate paying a painter so this video help me out a lot. Thanks.
Thanks for the information! I'm starting up as a maintenance technician and painting is a large part of what we do.
Totally going to try it this way. I typically cut in then paint, then do the process over again for my second coat. Thanks for sharing
The Cu,R,T method is always best. This guy knows how to paint, except that he rolls then Cuts, then, if needed, he trims. Cu-Cut in all of your borders. R-Roll in the body of your paint. T-Lastly, Trim in any wooden borders, such as Quarter-round, shoemold, and baseboards. That is the CORRECT way to paint. I've been painting off and on for 16 years. You never, and I mean never roll, then cut around the edges! Cut, Roll, and Trim! It's that simple!
Great video very informative and helpful! Made it look easy! Love the Bible verses as well thanks brother!
great job , this is the way its supposed to be done. i have a part time business and this is the way we do it and i train my guys to do it the same way.
Awesome, thanks for watching Vincent!
painters like me love to paint in empty rooms
You should also consider to always sand all your walls before painting the first coat and second coat of paint...the difference is amazing compare to those who do not know what a professional painted walls looks and feels like. Just sayin... ;))
quarantine’s brought me here🤦🏽♀️
I am not going to talk here
I am done
You could do worse :)
Thank u 🙏 now I have confidence In painting my kitchen my self
Learned lots of new things, great tips and you make it look easy! Enjoyed seeing you paint,thx
18 inch is great for really big jobs. One thing i dont like is you cant get very close to corners with it because of the frame. I use Wooster's 14 inch set up. 14inch frame and nap. And they make a pan for it as well. I feel it is easier to use than the 18. I retired 9 inch set up all together. Also Chris, I have been watching your videos for years. Please try the Picasso chisel brush. It is an angled oval brush. It cuts sharper and faster than any brush I have ever used. You cant get them at SW but you can get them on amazon for cheap. Order a couple and I bet you and your crew will love them.
Thanks for sharing Mary!
Just starting using a 3 inch picaso oval. Love it. I've gone almost exclusively to the 14 inch arrow worthy roller now. Awesome finish, and no spray on your base. Love th 9/16 on the ceiling
5:10
me in my bedroom that for some reason doesn’t have a single outlet in it even though every other room in my house does: I have no such weakness
Lol how do you survive!
@@crystal1329 i have a extension cord running to my room lol
Really enjoyed this video. Taught this old dog some new tricks! I've been painting in this house for an eternity trying to cover up the funeral home look it had. Finding preparation is most important since the bleed through has been such a pain. I haven't gotten the finish I wanted and realize painting in the W or N fashion isn't the best way to go. Overlapping has been an issue as well. Gonna hit another room today (the 2nd time) and hope for better results using what I've learned from your videos! I like your tattoos as well! Thank You!!
Thank you for showing us the correct way, wish I would have seen this years ago!!
Thank you for the video! I really didn't even know where to begin, but now I feel like I totally got this.
I've been a painter for the last 45 years. There are many ways to do many things but there are tried and true reasons for painting things in the RIGHT order. Fill before you start.
1.Cut in ceilings, cornice and light fittings first. Come down the wall with the ceiling paint about 2-3". You can roll the ceiling then or later. Usually ceilings are rolled before walls, but the cutting in MUST be done first before going anywhere near the walls.The reason you come down the wall 2-3" is so when you roll there is enough room for the roller to completely cover without hitting the ceiling.
2. Cut in walls. You cut in FIRST because you will leave brush marks if you do it last AND the paint will be setting while you are still cutting in, on a cold day you will get away with it but not on a warm one.You will make a mess of your work otherwise.
exactly what i was thinking, maybe he has a special paint where its not noticeable, but he did lots of stuf i consider wrong
Motivation Inspiration And Confirmation I Can Do It...Thanks For This Video💪💪💪💪💯💯💯💯👏👏👏👏👏
🤙
Is the tape really necessary? I’m painting my whole house and I’m giving up on the tape about halfway through because taping takes so long, I keep having to do touch ups,” after pulling the tape off, and I’m getting very good at precise cutting in.
Hire a painter
You are a wonderful instructor! Very clear, and concise explanations. I'm prepping to pain my uncle's whole house in and out, have watched a ton of your videos this week. Excited to get some professional-ish looking paint job out of this. :) Thanks a bunch!
Amazing! This super helpful, thank you!
Where can I find more detail on how you taped/protected the ceiling? Maybe I missed it.
Tape??. 😂😂
it the same, so he didun
Love the verse Philippians 4:8
I used to be a painter back in the day and we always did cut in, roll, cut in, roll finish coat.
I`m sure this works also but that`s still how I do it.
Yes, same here!
Thank you!! God bless you!!
i am half convinced just paying someone is easier then trying to paint my house
If only i could convince the wife
Lol if u need someone let me know I can do it I am very good at painting
@@billyfriars5619 Oh great! I live in the middle of Syria. When can you come? I just hope you can get here while the walls are still standing.
Student of Knowledge LOL you a student of trollness too 😂
@@seekerofknowledge6595 lmao
Thank you!! I love painting.. I am painting a little before I list home to sell. I do pretty good, but Now I Must add the long stick to my supplies! I always thought it was for outside or huge ceilings! duhh!!.
Never enjoyed a painting video so much ;) btw what color paint did you use I love it, thinking of using it for my living room.
I was wondering the same thing. It kinda looks like Sherwin Williams Macadamia which I'm about to paint my room in a few weeks.
...mmm perhaps WASH the walls before you paint them - I have seen some very dirty / dusty walls . Vacuum the flooring . Wash windows BEFORE you paint them . You forgot to mention USE a quality paint brush and roller cover and an extension pole for the roller handle ! I like a good shop light to light up the walls so i can see what I'm doing
You have some great videos and good experience on spraying!!
Thanks Felix Anthony!
Thank you very much you gave me great tips I'm going to save this video God bless you
Glad to help, thanks for watching!
Good video but I want to add buy a good brush, and in my opinion there is only one: Purdy, sure they are more expensive but they last forever if you take care of them.
Great videos and very helpful, but I'll be honest my favorite part is the verses you usually put on the screen!!! 🙏
Thanks for watching & supporting Gilberto!
Amazing tips no need to look further ..concise and clear