A note: The fifth, smaller hole in the cord divider is meant for the black electrical cable from the base to the printhead. If that's left loose it tends to sneak around to the back side of the gantry column and can make a thwacking sound when it slaps it.
I bought a use A1, and I hooking up the AMS lite to the A1. How do I know which tube is in which spot? Also, you did not show setting up the filaments parameters, how do I do that?
➡ Popular Filaments - amzn.to/3XoXY0P
➡ Top Rated Printers - amzn.to/3VuR6wn
➡ Resin Printers - amzn.to/3XuuC0R
➡ Paint & Supplies - amzn.to/45tlgEM
Just got an AMS mini. Your help has been invaluable in setting up my A1 Mini and now adding the AMS. Thank you keep up the good work!
How do you remove the spool holders for smaller reels?
A note: The fifth, smaller hole in the cord divider is meant for the black electrical cable from the base to the printhead. If that's left loose it tends to sneak around to the back side of the gantry column and can make a thwacking sound when it slaps it.
What if i lost the mounting screws
He used a monochrome filament on the boat. It’s a special filament that’s mixed that way for just the one spool.
Whats the second 4 pin connector for?
Another AMS
@@3DPrintDood but it has only four filament holes?
I bought a use A1, and I hooking up the AMS lite to the A1. How do I know which tube is in which spot? Also, you did not show setting up the filaments parameters, how do I do that?
Thanks. I was missing the point where you had to push the plunger and force the filament to be accepted by the ams lite. good now.
Does the AMS have to be on the right of the printer? Does it reach from the other side?
yeah to the right, but there is guides thot to mount it above on a wall
How do you get it to print all 4 colors at once?