Will this work on a schlage Everest master keyed system? If so, what bitting would you actually be decoding being that there is more than one working sheer line?
Please help me. I need a tool like this, but to open the cylinder chiza described in the UL050 key. What's this work tool number for the key in question?
@@BoredLockpicker Can I modify one of Leshi's tools to become a tool to open the Italian cylinder Yale, Chiza or Iso because it is our dominant and I always break the cylinder instead of a slot in a professional way fast and easy
@@BoredLockpicker We need tools to suit the work we face. I hope you accept my greetings for your reply and your patience I live in the Gulf countries and not all the cylinders there are American but a mixture of most italian and we try to make this profession easier and better in this place
I have found out that lockcodes isn't always accurate for example I picked a 2008 impala with b111 and kept getting inaccurate codes for the ignition. If you Type in 4242332124 which is the actual cuts for the impala but type it in lockcodes it will say no match found. But after picking the ignition you get g3189 which will pull up the same code that lockcodes says is not found. The problem with that is when typing in 3-10 or 4-10 it will never give you the right cuts for example ??42332124 which is the correct readings with lockcodes will give you the wrong ignition cuts. Is their a code website that is more accurate than lockcodes?
I just ran the code you said came off the ignition. It comes up different than the ten cuts you listed. B111 Lishi is very sloppy. Clean the lock good and pick it the other way. See if you get different cuts. I’ve literally in 7 years never had a problem with lock code code fill. It’s pretty straightforward the code series is in the database. Cuts match or they don’t.
@@BoredLockpicker g3189 code worked for the vehicle my question was why if I run those numbers individually it says no match found or 3-10 with those same numbers it gives incorrect information
@@redfoxx1417 run your numbers again man. I put them in from the code with question marks it comes up. What you decoded isn’t the same as the code from The ignition. You didn’t decode it right.
Great job my friend, LockPicks.com sent an email saying they had those in.
Yea I think they’re available at all the distributors now
Thanks for the info
Will this work on a schlage Everest master keyed system? If so, what bitting would you actually be decoding being that there is more than one working sheer line?
you'll be able to open the lock but it probably decode right if its master keyed
I need lishi key for a master lock. The one I got doesn't want to go all the way in
There’s only one for master lock. M1/ms2
@@BoredLockpicker some reason it doesn't fit doesn't go all the way in
@@BoredLockpicker thanks, I appreciate it
Hello...nice work...soo cool
Please Tell me, i Want to buy this kind of tool for my 2004 vw... do l need hu 66 or hu 100?
Hu66
Thank you, i want to buy from bangood Daniu hu66(50$)...there are quality products or not ?
@@iosifelu I don’t know. Mr li with Lishi invents these tools. Everyone else copied them. I only by original Lishi to support him
Please help me.
I need a tool like this, but to open the cylinder chiza described in the UL050 key.
What's this work tool number for the key in question?
doesnt exist. you would have to just pick it or drill it
@@BoredLockpicker
Can I modify one of Leshi's tools to become a tool to open the Italian cylinder Yale, Chiza or Iso because it is our dominant and I always break the cylinder instead of a slot in a professional way fast and easy
@@BoredLockpicker
We need tools to suit the work we face.
I hope you accept my greetings for your reply and your patience I live in the Gulf countries and not all the cylinders there are American but a mixture of most italian and we try to make this profession easier and better in this place
I have 75 lishi
Hu39. Hy20R TOy2014 , NE72, FO38
And more if I have to opens a car how do I fine the right one ?
Why would you buy something that you don’t know what they’re used for? Did you steal them?
@@2815Juan dont be rude on my channel.
the lishi's are name by the silca key blank number. you figure out what silca blank it uses and thats what lishi you use.
I have found out that lockcodes isn't always accurate for example I picked a 2008 impala with b111 and kept getting inaccurate codes for the ignition. If you Type in 4242332124 which is the actual cuts for the impala but type it in lockcodes it will say no match found. But after picking the ignition you get g3189 which will pull up the same code that lockcodes says is not found. The problem with that is when typing in 3-10 or 4-10 it will never give you the right cuts for example ??42332124 which is the correct readings with lockcodes will give you the wrong ignition cuts. Is their a code website that is more accurate than lockcodes?
I just ran the code you said came off the ignition. It comes up different than the ten cuts you listed. B111 Lishi is very sloppy. Clean the lock good and pick it the other way. See if you get different cuts. I’ve literally in 7 years never had a problem with lock code code fill. It’s pretty straightforward the code series is in the database. Cuts match or they don’t.
@@BoredLockpicker g3189 code worked for the vehicle my question was why if I run those numbers individually it says no match found or 3-10 with those same numbers it gives incorrect information
@@redfoxx1417 run your numbers again man. I put them in from the code with question marks it comes up. What you decoded isn’t the same as the code from
The ignition. You didn’t decode it right.
@@BoredLockpicker ????332124 will give you 4542332124 instead of 4242332124 g3189
@@redfoxx1417 why would you use four question marks?
what about a Everest c145?
as of now it doesnt exist. not sure if its in the works or not
BLP- can you try an Sc4 Lishi and see if it can open this cylinder?
this question should answer itself since they're different keyways. the sc4 wont even slide in
Can you please help me got a 2006 ford code 1247×
Subscribe to lock codes or insta code
No luck can you please?
@@chriscarbone6855 if you checked lock codes and insta code there’s nothing else I can look up