How to Replace Rear ABS Speed Sensors 2008-2020 Dodge Grand Caravan

Поділитися
Вставка
  • Опубліковано 29 вер 2024
  • Buy Now!
    New ABS Wheel Speed Sensor from 1AAuto.com 1aau.to/ia/1ABE...
    This video shows you how to install new rear ABS speed sensors from TRQ on your 2008-2020 Dodge Grand Caravan. ABS wheel speed sensors are critical to the operation of your vehicle's ABS and ESC systems, which use real time wheel speed data to ensure your vehicle stays safe and on the road. These magnetic sensors are sensitive and susceptible to damage, which would require replacing them.
    This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2008 Dodge Grand Caravan
    2009 Dodge Grand Caravan
    2010 Dodge Grand Caravan
    2011 Dodge Grand Caravan
    2012 Dodge Grand Caravan
    2013 Dodge Grand Caravan
    2014 Dodge Grand Caravan
    2015 Dodge Grand Caravan
    2016 Dodge Grand Caravan
    2017 Dodge Grand Caravan
    2018 Dodge Grand Caravan
    2019 Dodge Grand Caravan
    2020 Dodge Grand Caravan
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/obAs/1A...
    • Pocket Screwdriver
    • 18mm Socket 1aau.to/oaxk/1A...
    • 19mm Socket 1aau.to/oaxk/1A...
    • Trim Tool Set 1aau.to/oaqi/1A...
    • Ratchet 1aau.to/obXa/1A...
    • Socket Extensions 1aau.to/obUh/1A...
    • Torque Wrench 1aau.to/oaZT/1A...
    • Bearing Grease
    • Brake Grease
    • Brake Parts Cleaner
    • Bungee Cord
    • Cloth Rags 1aau.to/oJV/1AX...
    • Gloves 1aau.to/oaKy/1A...
    • Safety Glasses
    • 5mm Hex Socket
    • Floor Jack 1aau.to/oao9/1A...
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 3

  • @TRQ
    @TRQ  8 місяців тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @markthompson5697
    @markthompson5697 3 місяці тому

    After moving the red tab on the connector as shown in the video, I had problems releasing the connection. A quick shot with compressed air on the black release tab area did the trick. I think there was some grit under the tab preventing it from pushing down enough to release the connection.

  • @raulh9080
    @raulh9080 6 місяців тому

    Nice video now I feel ready to take this on.