Vapefly Brunhilde MTL RTA. Full & detailed review.
Вставка
- Опубліковано 6 гру 2019
- This gorgeous looking premium stainless steel MTL RTA tank, designed by German 103 team looks exquisite and certainly different.The tank contains two premium Stainless steel wires from Germany which automatically transfers the e-juice upwards to the juice wells on the deck when you tilt the tank to vape and it works brilliantly I never had a dry hit even when chain vaping. The method of inserting the e-liquid is certainly different and has an interesting side liquid filling design. I found the coiling & wicking to be super easy and the flavour to be top quality and matching to my high end MTL’s. The drew is highly versatile and can be adjusted from true MTL to semi- restricted DTL pending which screw to base design airflow insert you choose, I use the 1.2mm insert for a perfect MTL. You can also configure the airflow to a DTL by inserting the biggest airflow insert 2.5mm.
For a full analysis and examining the interesting design, watch the review.
FEATURES:
Diameter: 23.mm
Height with Drip Tip: 65.5mm
Coil Rebuildable: single Coil Building with enough room to use a DTL low-ohm coil
Airflow Adjustable: bottom & top
Thread: 510
MTL & DTL mouthpieces. Pending on airflow insert chosen
Automatic e-juice upward transfer mechanism
Six levels airflow meet your different needs,0.9mm/1.2mm/1.4mm/1.8mm/2.1mm/2.5mm
Premium Stainless steel wires from Germany
Easy single coil building, best coil position
Convenient liquid side filling design (with a chubby juice nuzzle have a cloth handy!!)
5ml large capacity tank
Thanks for this great review! It’s good to hear the detail and see the tutorial from someone who has used the tank extensively. Just got mine today and couldn’t be happier with it.
Excellent W D. It is a top quality RTA enjoy
Great Review!! How is the Direct to Lung airflow without any inserts? Loose? Restricted? How does it compare to, say, the Kayfun 5 squared or any others?
i found your chanel for my start in mtl now 1 year later im back again for this extravegent thing
😊 thanks
Great looking tank I'm using the trough tank with this reuleaux wismec tinker 2 great great kit NEC love your reviews thanks again pal 👍
Thank William
Mines arriving Wednesday - I’m so excited! Thanks for the review!
Great enjoy it. A tip for you as the brunhilda’s deck is above the tank and the 2 steel rods feed the cotton by the tilting motion when you place the mouthpiece in your mouth for a drew. When the tank is below half full you need to be aware to always tilt the tank a bit further according to the juice level in the tank so the cotton always remains moistened.
NET Vaper thank you 😊
Great review thank you. I love the setup you have with the Brunhilde and the side by side mod, they are a good marriage. The way that the stainless steel rods wick the juice is called the capillary action by the way.
Thanks Lucas.
Very interesting design..Looking forward to the other Drakes reviews..I bought three, the apple, cherry and whiskey.Thanks again.
Thanks Aubery. The Drake’s will follow.
Another great review. Keep up the good work, and, stay safe. Regards from the Philippines.
Thank you Nico.
Great review! I need to try that genny style tank. I had gennies a long time ago and loved them. They seem to be coming back.
Thanks Rick.
great review as usual, thanks and keep up.
Thanks vasgeza.
great review as always thank you sir
Thanks Sean
Thank you once more for your detailed review Nathan my friend!!!Better late than never as they say,haha!!!
I finally bought this wonderful rta and the only thing I can say is that it's a stunning little beast!!!Beautiful to look at and the flavour rocks!!!I placed the provided coil very close to the air hole pin and it's as silent and smooth as the Bishop to my surprise!!!It was worth the wait by all means!!!By the way I've matched it with the Easy sbs mod and it looks exquisite!!!!
Enjoy John it is an awesome RTA that also looks the part and is until this day on my regular rotation of my favourites.
@@netvaper Thank you my friend!!!I believe that it's going to be on my regular rotation as well!!
Hi Net Vaper, awesome 'mtl rta' picked mine up from sourcemore £18 bargain. Best thing ordered on a monday arrived on the friday. Dont know how they did that unless it came from there european warehouse. Thanks for your excellent review. Big 👍😃💙🌈💨💨💨
Yes Simon top RTA. Now you know why I always advice to wait £18 bargain indeed. Enjoy
I know this is quite old video but I can't find the answer to my question anywhere, so your help would really be appreciated! :D
What is the difference between Brunhilde and Brunhilde 1o3 (in terms of throat hit, vaping, quality, taste, etc)
What is the general difference between the Brunhilde series and the Alberich series? I have both Alberich V1 and V2, prefer V1 for the throat hit,
but I don't understand why Vapefly has two series of MTL RTA tanks, and most importantly, is Brunhilde for NET Tobacco MTL RTA superior to Alberichs?
Thanks in advance!
The Brunhilde 103 is a DTL RTA whilst the one in this review is strictly MTL in RDTA style meaning the tank is below the deck not over the deck like all RTA's. The Alberich V1 & V2 delivers stronger throat hit but the looks & design and excellent flavour of the Brunhilde is what attractive.
I am using Pandora Mtl Rta. I'm looking for a rta close to the DL shoot. Would you recommend this? Should I switch to this after Pandora?
@Fatih Emel. No. The Brunhilde is strictly a MTL RDTA design and the airflow would not be airy enough for RDL. One MTL RTA’s that comes to mind that can be configured to RDL is the Arbiter Solo by Oxva that you have a turn option on the top cam between MTL & RDL very good tank.
Just got the Brunhilde.. waaaao👍 great flavor.
First day vaping it, only thing i worry for, it cleaning the coil with juice in the tank.
Excellent 👌 the liquid is separated from the deck so cleaning the coil & changing cotton is not a problem even when you have a full tank
@@netvaper sounds great. Cleaning day tomorrow, I wondered if the SS cables would drop in the water, maybe it's better with this one to clean it under running water and not Dunk it in a cup.
I wash them under the tap just make sure they don’t fall down the plug hole😀
Hi again
Must say I absolutely love the Brunhilde RTA, that one
- kayfun X and Dvarw FL are my favorites.
have the fev 4.5 and Alberich v1. Also, but not among my favorites contently..
I consider one more, the Steam Crave Aromaizer - pioneer 1.5 / Sure or Alberich v2. Those are in my budget. Any recommendations based upon the flavor profiles from my top 3 ?😬
@netvaper only thing iam have been unhappy with is airflow gurgling from condencention hitting the airpin. 1.2mm right now i think i have found a fix for for it.
when wicking run 2 thin snips cotton on both sides of the air pin under the coil, run them so they atach in, where the ss rods are.
Hey Net Vaper, how is this with juice consumption? I have the Dual coil DTL version and it really sips the juice compared to my other DTL tank. I want to get into MTL vaping and reduce my juice consumption further, will this be sufficient for my needs?
Any MTL RTA will consume much less then a DTL especially dual coil. I personally very much enjoy the Brunhilde in fact most liquid reviews I use it. The juice consumption on the brunhilde is on par with MTL RTA’s typical consumption which is moderate
@@netvaper Thanks for the reply! I'm definitely going to get this. Any recommendations for coils so I can optimize the build?
@@Kalyptic MTL coil 0.8-1.0ohm 2.5mm ID best core clapton or fused clapton. I use mainly naturevape 1.0ohm core clapton coils
@@netvaper Great, Thanks a lot!
Hello mr nathan , i saw this review and i was surprised that u said that is atty performs as the kayfun prime , i looked online to my local stores and i found it and ran and bought it , tbh its an amazing attey the performance is superb , my only issue is that the deck over floods with liquid , now am using the smallest airflow incert , i dont think the over flooding is due to the smallest incert , do i have to thiner my cottons ? As for the Auguse v2 that i bought the other day it was goin nice till i had refill my tank and its leaking , even though i make sure you that juice flew and airflow is both closed during the filling
Hi Zizo the brunhilda is indeed a excellent mtl .The flooding on the Brunhilda only occurs when you leave it on it's side as the liquid feeds the cotton like a RDTA so when you tilt the rta to vape then the liquid travels up the steel rods to feed the cotton. you need to put thicker cotton to keep the liquid from overflow and not keep the rta tilted when not vaping, the airflow has nothing to do with flooding. The Auguse juice flow must be closed completely when re-filling and while you are tightening the top-cap turn the rta upside down then fully tighten the cap and then open the juice flow whiles the rta is upside-down that restores the vacuum. anther trick is to take a tissue and pot it over the mouthpiece and hold the rta upside-down and suck a few times that would get rid of the excess liquid.
@@netvaper am finally enjoying mu auguse v2 thx for the tissue tip 😊 , yesterday i bought the college dna60 in black and now my auguse v2 which is also in black sitting on it , mean while am waiting for my bishop and the aspire mixx to arrive tomorrow hopefully , thx mr Nathan for all tips and advices , bug luv
@@Diplako enjoy all your new vaping gear😊
Thank you for this review.
Have you felt any heat as the coil is very close to the drip tip?
Not at all Marwan especially that the mouthpiece is designed to defuse heat
It sure gets hot if you chain vape. I used it this whole day, 2.5mm diameter coil, 27ga, 6 wraps, around 1ohm resistance, vaped on 11 watts with the smallest air pin installed. If I go 6-7 puffs right one after the other, it gets hot. Not unbearable, but it is what it is. Using the same driptip as the one on the video.
Thank you Nathan for wonderful review. I am having noise like turbulence through the airflow. Any suggestion pls..
Yes the single airflow hole does tend to emit a kinda whistling noise that I completely ignore😊
@@netvaper Oh, thank you Nathan. I thought it was with me only.
mine often times can't fill the juice into the filling port. it just overflowing, like there's something blocking the way. any clue how it happens?
It is a airlock that pushes the liquid upwards. Tilting the RTA helps. Btw Make sure you are filling into the liquid hole not the airflow hole😊
@@netvaper wow...that's crazy. now I can fill the tank easily, by tilting the tank horizontally. Thanx a lot!!
Thank you for reviewing this. I bought the hellvape md. Now im planning to buy this. How do you compare this to the md?
The Brunhilda is an excellent MTL L.A, but is more of a RDTA where the deck is above to tank and the liquid is fed to the cotton via steel rods when tilting the rta to vape, the flavour & build quality of the Brunhilda is much superior to the MD.
@@netvaper Ill keep that in mind. Ive decided to buy this. Love the af options. Now I need to decide which mod should i buy for the brunhilde.
@@thevapingbum4745 well if you hook up tomorrow to the live chat 21/4 at 3pm BST i will show you a few options live😊 (just remind me by sending a message in chat)
@@netvaper ok. Ill wait. Ill turn on the notification bell so that I, wont miss it.
Can the draw be as tight as the glaz ?
Yes by screwing the smallest 0.9mm airflow screw it is as tight drew as the smallest airflow hole on glaz but the glaz airflow is easier to adjust simple turn of the airflow ring does it. The airflow setting on the Brunhilde is meant to stay the same after your first initial setup as it is a bit of a hassle to change.
What is the name of the second mod mod you put on the tank on?
It's a fantastic looking mod
Hi Zyad. As I read your other comment I understand you got your answer😊
Hey
Can you please compare this with Bishop? Should I buy this if I have Bishop?
If you have the Bishop there is no need to change although the Flavor on the Brunhilde is a tad sharper as your mouthpiece is right above the coil like an RDA but for that small difference it is not worth buying over the bishop. You would not notice the difference only when vaping both on the same coil wattage & liquid and even then it is by a tiny margin.
@@netvaper thanks
Now 4 years later, the Brunhilde is not in your favourite MTL tank list anymore right?
It is Harold but I mainly use it when reviewing NET liquids that I must admit it is not so regular these days😊
Brunhild is your favorite rta net vaper? I always see him with him in his reviews... hug!!!
I use it as a MTL RDA😊 perfect for reviewing liquids as I only need to change the cotton and review another. The flavour is very accurate as well.
@@netvaper Hmm, I see, cool! hug!
Can you use nic salts in this
Hi Stephen. Nicotine salts based liquids are only recommended in a MTL setup. So yes, the Brunhilde is perfect for nic salts as well
@@netvaper ok great thank you very much for getting back 👌
thanks for this review, mtl is not my thing but idk, this rta is beautiful.... 🤔
It is indeed Alex. If you into DTL Now you can buy the Brunhilde Top coiler RTA which is the same design but houses dual coils for the DTL vapers.
@@netvaper best flavor?? Oxva arbiter or brunhilde mtl?
@@alexverplancken7257 Brunhilde
It works on capillary system whit steal roads( it's German thing ,, they use it in coustum tanks a lot),,, I just want to get one ,, I love MTL whit warm vape
Yes I love it too. Nowadays I use it for nearly all my tobacco reviews. Enjoy
@@netvaperit's perfect for testing liquids,, and deck is great for experimenting,, just few weeks I build vertical coil,, and flavor & air flow = great puff ( similar like PnP Innokin Z coil) 👍🏻 I used La Tabbaceriria Balkan NET liqid 🔋
Enjoy ☺️
How dose it compere to bishop
It is very smiler in flavour & throat hit but in a RDTA format so the juice flow work’s differently but as effective. I personally enjoy the Brunhilde even in today’s high standards of MTL RTA’s. The airflow is not as smooth & silent as the Bishop
@@netvaper thanks for this review. I’m looking for a mtl rta for best flavour, which do you recommend in 2023? Thanks
I have all the mtl rta but kayfun is stil in the top this rta is 5 of ten
Indeed the Kayfun is top quality