Naaa,these are classics, and he works on a lot of them, very good content, but to your point, have you watched LR Time? If your daily drivers give you enough content for a update every week, then drive a Toyota rather.:) LR Time also a very good channel though.
@@bennyz4929 You most obviously do not know what good design is. Nor do you understand resonance frequency and how to correct for it. When a dullard like you makes that sort of idiotic accusations is always a given.
Glad to hear you mention Sabine Schmitz! “The M-5, it’s like i am a part of the car”. If anyone can claim provenance to the M-5 it’s Sabine. I pine to this day over her passing.Your love and caretaking of these fantastic cars would please her.
I don't know if I clearly recall any module failures, replacement, repair, coding, programming etc. For example his e39 m5 has a light module that likes to die ;)
*18:50* They must have charged you extra on that wheel since they used half the shops weights :)) It's for winter so who cares, but you seem like the type of guy that remounts a tyre until it perfectly matched the wheel. Happy Holidays my man!
The trick is to only own one BMW... as a second car haha. Enter my latest purchase a 2000 Z3 2.8i manual... I may have got the cheapest running (ehh) no rust one in the US.
My 2000 M5 jammed in 2nd gear as well. I decided to completely disassemble it and found nothing broken except a jammed fork. After reassembly trans was working fine. Also worth noting that this has happened to quite a few M5s and usually after an aggressive shift.
I had this same issue except I was stuck in 5th and it was after an aggressive shift. Just ended up replacing the whole gearbox since I had 3rd gear grind anyways.
@@Asserti Google search should help you out. You don’t need to separate the gears themselves, just separate the case starting with removing indent balls on the shift forks and unbolting stuff from there. As always, clean area and meticulous notes on where things go during disassembly will help you tremendously during reassembly. Would love to help out more but this happened around 2011 and I sold the car in 2015..
Such a wonderful video been watching the channel for years now and your videos never ever fail to put a smile on my face and wanting more. Major BMW enthusiast here from Michigan in the USA sending my love… too the best UA-cam channel on the internet!!
I will have an E60 M5, maybe not only one, I WILL, MARK MY WORDS. What and absolute jewel of a car, it's my dream car since childhood, since 2007-2010. Thank you for letting us enjoy this beast too, trough your clips, WE LOVE IT!
bro you are not the only one. Ever since I was a child I just loved looking at my uncle‘s e60 when we drove to my aunt. He always drove in front of our car and I just loved it. I think that is the reason why the e60 M5 is somewhat special to me. It sound childish but I also dream of getting a M5 in the future. Hope that you at least will buy one which wasn‘t abused by some idiot 😂
@@eec9610 thanks! Hopefully we will both fulfill our dreams, they are completely reachable. Even if I'll get one that has been abused, after watching project Raleigh I will be able to restore it, that is the plan: get one in whatever state it is (abused or not) and work on every single bolt to get it to mechanical perfection.
I have one, it’s ok. The best thing about it is the engine. Nothing like the the v10 singing on downshifts and upshifts. It always feels akward that the sound is coming from a 4 door sedan.
Streten, have been a big BMW fan of yours for years now. Your channel has one of the most respectable and adventurous, not along informative channels on you tube world wide. It's the reason we know your channel is so very successful. We have a passion for the BMW mark now for many years. And your knowledge has helped us a great deal. But more than anything the patience to deal with the small and big problems when they come up. Especially the more expensive fixes like N54s or any V8, or stright 6 turbo from BMW. It's an art to see the dedication to perfect the things most owners would like to perform on our BMWs. Just to let you know you have a big fan base of BMW family's and enthusiasts in many parts of the world. Thank you Sr.
WOW the carbon fiber did add more beasty/monstrous sound hahaha, only one thing i noticed that the V10 badge was jumping off the carbon intake at 30:10 😅 other than this you're best man, i never miss one of your videos and Merry Christmas🎉❤
My E39 M5 is about 140,000 miles was glad to see your engine is still running strong even if the transmission has an issue. I have noticed the popping out of third gear once or twice in the 15 years I've had this car and never knew about the arrestor balls that cause this issue so this video definitely helped me! I think I will be upgrading that even though my transmission is otherwise fine. I hope the e60 shifter didn't mess with the transmission! I upgraded my stock shifter to the UUC short shifter and I haven't had a problem in ~40,000 miles it definitely improved the shifting experience - those plastic balls on the stock shifters literally deform and fall apart! Anyway, Merry Christmas!! Looking forward to more E39 M5 content! Hope you get both these beautiful machines up and running soon!
I have the same Problems. I try to keep my E 46 of the road but after 300.000km and 24 Years ( yeah its the Pre-Facelift) its more difficult because there breaks every month something. Actual there are breaking expensive sensor´s... i drove some newer BMW´s but i dont like them because they are quite heavy and "big" in comparission to my E 46. My E 46 is not fast, has no tuning, but i like it. Dont know why, cause most of the time something gone bad and has to be replaced.... I can image the fight to keep an E 38 on the road. The times here in Germany will be a lot harder than the past years. Everthing gotten so expensive like Fuel, Car insurancy and the list goes on. In the End i will try to find a cheap second car, so my E 46 can chill a bit. Cheers! P.s which E 38- Version do you have?
@@GamersSide4you 1999 M62TU. Spent 13k on repairs the last 6 years including VANOS rebuild, timing chain and complete suspension overhaul but there is always something new that has be replaced.
Sadly, I can relate to that. 1997 740i, I feel like this is a never ending cycle of a month of repairs and a week of joy. Starting to lose my motivation to keep this thing. I feel like everybody else is just driving their cars and enjoying them meanwhile I'm always worried that something is going to break while just cruising somewhere and not pushing the car.
It’s Boxing Day here in New Zealand and I was just relaxing after too much excess yesterday, so what a lovely surprise with Mitzy taking a starring role 😊 I’m still puzzled why I love watching you fix broken BMW’s - it’s so compelling I have to watch as soon as you post a new video. I now know more about BMW pulleys and how to replace them than I ever thought I would need to know. 👍🏼
same, I love my E39 Touring, but is starting to cost money 280K on it now and it really has not cost a lot to maintain up.to now it always has had good oil (Penrite 5w40) and as its a jap import it has the dreaded JATCO trans, but changed the trans fluid every year, never had a problem. The big problem now, is what to do with it, I have a FUGA 370GT what just goes, wife has a Lexus IS350 F which runs ring around any of the modern BMW's, but the old E39 is still a good driver, but for little annoying shit, and I think they were the pinnacle of BMW engineering, which is why we have never brought a newer one after owning BMW's for 35 odd years
Good day Sreten! I'm from the Philippines and I just discovered your channel recently and I love your content. I'm learning a lot especially I'm a mechanical engineer. I can totally relate to your technicality with regards to your work. I'm now subscribing to your channel and looking forward to your upcoming contents. Much love and more power to your channel.
Good info in there, ordering parts now for preventive maintenance on the E39... As for the E60, man it would look nice in Chrome Shadow - A56 color code. To my knowledge, the only car painted with this charcoal grey color was the E39 M5 from BMW classic, which actually was featured on the channel a while back. Best color I've ever seen and I'm about to repaint one of my Dolphin Grey 325is E30s with that specific color code.
I had the pleasure of being a passenger in an e60 m5 once, the engine and exhaust noise gave me goose bumps. It’s absolutely the best sounding engine in any car ever, if only my pockets were big enough to have one. For the E46 rev matching you need to do an ICV delete and a tune to follow, which makes it easy.
Sreten, as much as you love everything about that E60M5. Nothing comes even close to the looks of your E39M5, what a stunning car that is. Simply amazed.
No sólo eso la calidad de materiales es sumamente superior en un e39 para muchos lo mejor en serie 5 que a echo BMW quitando por supuesto tecnología cada mes sale algo nuevo pero no por eso es mejor por ejemplo la caja cambios de ese E60 aún siendo más moderno la automática es una porquería donde a cada cambio el retroceso se nota mucho casi un golpe y según e visto en muchísimos videos lo más importante la fiabilidad de uno a otro nada que ver
Back to back episodes? I must have been good this year. Santa (Streten) has delivered two glorious gifts. Also, I can't get enough of the Mutzi cameos.
Hi Sreten - our buddy Adam Bajrak gave me a great tip about bleeding the power steering fluid circuit. Don't start the engine. Fill the reservoir and unlock the steering column with the key and turn it lock to lock a couple of times and it will get most of the air out of an otherwise drained system. You probably need to top up the reservoir a couple of times while doing this with the engine off. This saves the pump from cavitating on startup. Love the channel! Pete from Mt. Airy MD
I usually go lock to lock before turning the car on, get some fluid into the rack. It has helped with the frothing and cuts down on a lot of the whining.
Thank you for sharing this mighty V10 induction, fly by and Autobahn sounds. Gave me ghostbumps and emotions just by watching your video. Hoping to get in this position, someday 😬 PS: looking forward on the video when you install the carbon box and different filters.
on pump bleeds it can be very helpful to elevate the front end of the car a couple feet encouraging bubbles to travel to the high point in the system. also the wheel should be turned slowly lock to lock several times before starting car. then after starting let it idle until fluid temp can increase before turning wheel. hope that helps
I was very intrigued to know how the engine badges had been broken, until the min. 22. The new carbon fiber intake is beautiful! I congratulate you on the improvement but the new badges are going to fly away soon too!😅
Regarding windshield wipers, I only use the BMW original ones - my experience is that they last so much better than any aftermarket ones - tried a bunch of brands but the last ones from BMW were still in good condition after 4 years and 80000 kms, no sqeak and they still wiped off the rain as they should.👌
What makes the world great today is that I can get entertainment out of your passion, you can make a living, teach others, and live your best life. Happy New Year! I think in the old days they would call that art! You're an artist!
I was so cloae to rolling the dice and buying a V10 M5 but here in Australia they are all SMG :( and watching you drive yours confirms that manual is always the way to go, ALWAYS. Your channel is my favourite content to watch by far so I am even tempted to support your advertisers maybe starting with an intake for my GR Yaris.
OMG this V10 sound really never gets old😊 Amazing! Thanks for the experience Sreten! The only problem is that now the prices going up due to your presentation haha 😂
2h 7k likes what a dedicated community we are! I just can't believe that you drove my dream car trough Latvia!!! Much appreciated I would love to buy D3 Alpina 2009 for 7900 EUR with 279,000 km on it so, I have general idea of what I am getting into thanks to your videos. I will never own a BMW but my dream car is Alpina 7 series before 2012
A good tip for bleeding ps fluid. When you go to start the car for the first time, start it for a few seconds and turn it off, add a little more fluid, and then replete until you fluid level no longer drops. This way you prevent air gettin sucked into the system and causing the whining noise and making your fluid bubble.
That's a relief! Last video when you told us that the e39 m5 was broken ... depressing! But now, everything is fixed again - and a video out at Christmas: You are the King of repaired BMW's! :-)
Gotta love the E60... I have always had a weak spot for it. Only thing I'd change on your car is the wood trim. I Have always preferred aluminium or black gloss... especially with cars from this era wood can look a bit cheap imo. I remember when I was a kid we were in traffic (stau) on the Autobahn, an E90 M3 and an E60 M5 with Eissenman exhaust stood still, next to each other and waited for a little while. They were holding up everyone who was behind them for a couple of minutes untill they had a couple of hundred meters clear road. One guy had is hand out the window counting down and then they drag raced... I opened up my window to hear the exhausts. For me as a kid it was such a cool experience, especially the V10 noise
There it is, 500.000 subscribers! Crazy how this number went up in the last weeks. I am one of the new subscribers having found this channel just recently (what a shame) and I am already addicted 😁 Great content, thank you very much for this, well deserved 500k, keep on going!
love your vids! 25:25 is actually a heat blanket, the hoods are designed with those plastic clips that will melt, in case of fire, and then it will fall donward ontop of the eingine, the only other thing holding it the little flaps on the botom
Sreten. Thank you so much for all you do for our entertainment and edumacation. You have me wanting to change out the transmission oil in my not- quite- daily driver 1991 Mercedes 250TD now, to your "patented" 50/ 50 transmission and ATF fluid combo. But i drive the 30 year newer BMW 535i more frequently so that's a down the road thing. Unless i give my BMW to my brother ...
I‘m a technician: try this: before you start the engine just lift the car from the ground an turn the whel from lock to lock 30 times and ad oil if necessery. Then start the engine and do the procedure again an keep an eye on the fluid level. Works ever time!😊
I do the same on my E61 and Z3. Engine off. Turn lock to lock several times until the fluid stops dropping. Running the engine too early just creates bubbles and lots of noise.
I did, and I do the same, it doesn't make a difference on the E60 and E92. It's easier to use your steering wheel since the car is already in the air. :)
Sreten I had to stop watching your vids months ago bc it reminded me of all the work I need to do on my car, but couldn't afford to do...hopefully in the new year my raise will allow me to get it running closer to Sreten standards 🤞
Welcome to the CF club, it was just matter of time that you found the proper representation. It's just a wonderfully acoustic material when manufactured properly. OEM quality with just that little extra.
Because of the temperature difference during the winter your engine bay will be constantly wet. This sound insulation allow the temperature to escape slowly and oder than sound proofing that is its second job. Once removing it there will be a lot of condensation. :)
Thank you! I don't see that being a problem, I haven't noticed anything different. The M3 doesn't come with one from the factory and I haven't heard of condensation being an issue.
I love how Project Raleigh was a trashed beater when you first got it. You've now built it back into it's glory. Hate it when such a tiny part can create such havoc.
Sreten, you are simply the best! It is an absolute pleasure to watch and listen to you work on your cars. You have The best attitude. Thank you so much! Happy New Year and all the best!!
Great info to know about the E39 transmission. There are a few us in this area with them and so far no issues transmission wise but we all know it's coming... either that or rod bearings.
It’s nice to know that I’m in the minority of having an old bmw that is currently leak free, it’s an e36 325tds with the mighty M51 diesel and it’s taken some time and money but is officially leak and rattle free! Not without issues, but sadly there are a huge amount of parts than are unobtainable. But I wouldn’t have it any other way! I’d also love to see Sreten install the eventuri air intakes to match that beautiful plenum also!
Good to know that there are real Petrolheads left on the planet. Modern BMWs no longer give you goosebumps with their fake bangs and Christmas tree lights. Love your channel!
When he said while removing tensioners " i think you know what we have to do here" i was beging for him to clean them up with that jet. Oh god. Thank you.
My friend, I see the intake badges flopping when you were giving us that beautiful symphony. Please review the video to confirm the badges. Amazing work and keep doing what you are doing.
Sreten you truly are a MASTER BMW TECHNICIAN. I love your work and attention to detail. By the way as an ARMY mechanic there is nothing wrong with an engine or a transmission chewing old broken parts lol. Happy New Year Brother!
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
The good thing about running a bmw mechanic channel like yours is that you will never run out of content 😅
🤣
lmao real
Hahahaha
lmao i was just gona say that 😂
Naaa,these are classics, and he works on a lot of them, very good content, but to your point, have you watched LR Time? If your daily drivers give you enough content for a update every week, then drive a Toyota rather.:) LR Time also a very good channel though.
30:10 V10 Badge holding on for dear life
Streten may not be pregnant, but he never fails to deliver.
Lmao
After long and hard labour.
bro??
😂😂😂😂😂
I'm already seeing this joke around so much, but it never gets old
Man that intake noise of E60 M5 is epic, absolutely one of the best intake sound I ever heard!
That plenum vibrating with the revs is one of the coolest things I've ever seen!
lukeloan: You like bad design? LOL!
@@stephencurry8552you obviously don’t know what plenums do😂
@@bennyz4929 You most obviously do not know what good design is. Nor do you understand resonance frequency and how to correct for it. When a dullard like you makes that sort of idiotic accusations is always a given.
vibrating from vacuum pulsation
@@OggyXXXL No really?
Glad to hear you mention Sabine Schmitz! “The M-5, it’s like i am a part of the car”. If anyone can claim provenance to the M-5 it’s Sabine. I pine to this day over her passing.Your love and caretaking of these fantastic cars would please her.
30:04 you can see the V10 emblem wants to "go places" :D
I was expecting it to fly off during one of those revs..
Knowing you can fix almost any issue on your must be a delight.
I don't know if I clearly recall any module failures, replacement, repair, coding, programming etc.
For example his e39 m5 has a light module that likes to die ;)
@@spencermaiers8322 Everyone can get inpa/ista/ncs expert to code new modules :)))
The new “microfiber” is flexing too. V10 is a beast
The flex of the carbon fibre is what’s causing the better sound.
@@indiebekonninteresting. Like an acoustic instrument
@@indiebekonn ooh i didnt know. how interesting
This might actually be peak Streten. At the very least one of the BEST videos of the last couple of years. Long live Project Raleigh!!!
Wasn’t expecting one today, what a great Christmas gift. Thank you so much and wishing you and everyone that supports you happy holidays 🎉❤
Well said. Merry Christmas 😇
Happy Christmas 🏴🇬🇧
Took the words right out of my heart!
Same!!! Saw over on Insta there was a new post and got super excited. What an awesome post-Christmas gift!
*18:50* They must have charged you extra on that wheel since they used half the shops weights :)) It's for winter so who cares, but you seem like the type of guy that remounts a tyre until it perfectly matched the wheel. Happy Holidays my man!
I'm stressed enough when my one BMW breaks down.
Not unusual, mine did all the time, and I was absolutely fastidious about maintaining it. Nature of the beast😂
@@pmscalisiwhat model/engine did you have?
@@MRMV483It sure sounds like N57
The trick is to only own one BMW... as a second car haha.
Enter my latest purchase a 2000 Z3 2.8i manual... I may have got the cheapest running (ehh) no rust one in the US.
@@pmscalisi I had renault. I was not rich enough to own a renault so I bought Bmw. Its 10 times more reliable.
My 2000 M5 jammed in 2nd gear as well. I decided to completely disassemble it and found nothing broken except a jammed fork. After reassembly trans was working fine. Also worth noting that this has happened to quite a few M5s and usually after an aggressive shift.
Do you have instructions on how to open the G420?
I had this same issue except I was stuck in 5th and it was after an aggressive shift. Just ended up replacing the whole gearbox since I had 3rd gear grind anyways.
@@Asserti Google search should help you out. You don’t need to separate the gears themselves, just separate the case starting with removing indent balls on the shift forks and unbolting stuff from there. As always, clean area and meticulous notes on where things go during disassembly will help you tremendously during reassembly. Would love to help out more but this happened around 2011 and I sold the car in 2015..
Misha casually sitting in the car looking at you 20:01 😂
Such a wonderful video been watching the channel for years now and your videos never ever fail to put a smile on my face and wanting more. Major BMW enthusiast here from Michigan in the USA sending my love… too the best UA-cam channel on the internet!!
I will have an E60 M5, maybe not only one, I WILL, MARK MY WORDS. What and absolute jewel of a car, it's my dream car since childhood, since 2007-2010. Thank you for letting us enjoy this beast too, trough your clips, WE LOVE IT!
You need to have at least 2 to make sure you have one to drive while the other one is in the shop getting fixed 😁
bro you are not the only one. Ever since I was a child I just loved looking at my uncle‘s e60 when we drove to my aunt. He always drove in front of our car and I just loved it. I think that is the reason why the e60 M5 is somewhat special to me. It sound childish but I also dream of getting a M5 in the future. Hope that you at least will buy one which wasn‘t abused by some idiot 😂
@@eec9610 thanks! Hopefully we will both fulfill our dreams, they are completely reachable. Even if I'll get one that has been abused, after watching project Raleigh I will be able to restore it, that is the plan: get one in whatever state it is (abused or not) and work on every single bolt to get it to mechanical perfection.
@@UpsideDownCanoe two will always be better than one😂😂
I have one, it’s ok. The best thing about it is the engine. Nothing like the the v10 singing on downshifts and upshifts. It always feels akward that the sound is coming from a 4 door sedan.
Streten, have been a big BMW fan of yours for years now. Your channel has one of the most respectable and adventurous, not along informative channels on you tube world wide. It's the reason we know your channel is so very successful. We have a passion for the BMW mark now for many years. And your knowledge has helped us a great deal. But more than anything the patience to deal with the small and big problems when they come up. Especially the more expensive fixes like N54s or any V8, or stright 6 turbo from BMW. It's an art to see the dedication to perfect the things most owners would like to perform on our BMWs. Just to let you know you have a big fan base of BMW family's and enthusiasts in many parts of the world. Thank you Sr.
WOW the carbon fiber did add more beasty/monstrous sound hahaha, only one thing i noticed that the V10 badge was jumping off the carbon intake at 30:10 😅 other than this you're best man, i never miss one of your videos and Merry Christmas🎉❤
Ye these badges are coming off too 😅
Not to worry, they have been resecured with Reinzosil. :D Merry Christmas!
@@martonmisik886They are too weak for this engine :)
@@robertnagy2456 I thought M was "The most powerful letter in the world" though. 😉
My E39 M5 is about 140,000 miles was glad to see your engine is still running strong even if the transmission has an issue. I have noticed the popping out of third gear once or twice in the 15 years I've had this car and never knew about the arrestor balls that cause this issue so this video definitely helped me! I think I will be upgrading that even though my transmission is otherwise fine. I hope the e60 shifter didn't mess with the transmission! I upgraded my stock shifter to the UUC short shifter and I haven't had a problem in ~40,000 miles it definitely improved the shifting experience - those plastic balls on the stock shifters literally deform and fall apart!
Anyway, Merry Christmas!! Looking forward to more E39 M5 content! Hope you get both these beautiful machines up and running soon!
Im constantly fighting to keep my e38 on the road and it’s stressing me a bit. Good to see that even the pros have problems…
As a previous E28, E30, E34, and now a E65 and E70 owner, I can relate to your stress.😎👍🏼
It’s well worth it. Keep at it.
I have the same Problems. I try to keep my E 46 of the road but after 300.000km and 24 Years ( yeah its the Pre-Facelift) its more difficult because there breaks every month something. Actual there are breaking expensive sensor´s... i drove some newer BMW´s but i dont like them because they are quite heavy and "big" in comparission to my E 46. My E 46 is not fast, has no tuning, but i like it. Dont know why, cause most of the time something gone bad and has to be replaced....
I can image the fight to keep an E 38 on the road.
The times here in Germany will be a lot harder than the past years. Everthing gotten so expensive like Fuel, Car insurancy and the list goes on.
In the End i will try to find a cheap second car, so my E 46 can chill a bit.
Cheers!
P.s which E 38- Version do you have?
@@GamersSide4you 1999 M62TU. Spent 13k on repairs the last 6 years including VANOS rebuild, timing chain and complete suspension overhaul but there is always something new that has be replaced.
Sadly, I can relate to that. 1997 740i, I feel like this is a never ending cycle of a month of repairs and a week of joy. Starting to lose my motivation to keep this thing. I feel like everybody else is just driving their cars and enjoying them meanwhile I'm always worried that something is going to break while just cruising somewhere and not pushing the car.
I love a good intake sound. Those microfiber intake manifolds are awesome, such a nice improvement.
It’s Boxing Day here in New Zealand and I was just relaxing after too much excess yesterday, so what a lovely surprise with Mitzy taking a starring role 😊 I’m still puzzled why I love watching you fix broken BMW’s - it’s so compelling I have to watch as soon as you post a new video. I now know more about BMW pulleys and how to replace them than I ever thought I would need to know. 👍🏼
That's a "ditto" from this Kiwi too.
Likewise from Oz.....@@chrisp.2544
same, I love my E39 Touring, but is starting to cost money 280K on it now and it really has not cost a lot to maintain up.to now it always has had good oil (Penrite 5w40) and as its a jap import it has the dreaded JATCO trans, but changed the trans fluid every year, never had a problem. The big problem now, is what to do with it, I have a FUGA 370GT what just goes, wife has a Lexus IS350 F which runs ring around any of the modern BMW's, but the old E39 is still a good driver, but for little annoying shit, and I think they were the pinnacle of BMW engineering, which is why we have never brought a newer one after owning BMW's for 35 odd years
Sup Nige? I'm about to head back to NZ to fix my E39 that's stuck on my uncle's lawn. Wish me luck!
That S85 engine just is something else, just love M5s/ the 5 series generally honestly and those 6 speed manuals are 👌
S85 and V6 Busso the best sounding engines ever made. Merry Xmas Streten!
Busso sounded sooo good. I used to daily a milano verde and loved revving it out
Toyota's V10 that they put in the LFA gets my vote, even more unobtainable than the E60 though 😂
Don’t forget the Dino V6.
@@unicyclingistheshitlexus v10 sounds too refined. S85 sounds manlier
Good day Sreten!
I'm from the Philippines and I just discovered your channel recently and I love your content. I'm learning a lot especially I'm a mechanical engineer. I can totally relate to your technicality with regards to your work.
I'm now subscribing to your channel and looking forward to your upcoming contents.
Much love and more power to your channel.
Good info in there, ordering parts now for preventive maintenance on the E39... As for the E60, man it would look nice in Chrome Shadow - A56 color code. To my knowledge, the only car painted with this charcoal grey color was the E39 M5 from BMW classic, which actually was featured on the channel a while back. Best color I've ever seen and I'm about to repaint one of my Dolphin Grey 325is E30s with that specific color code.
I asked around about Chrome Shadow, it's pretty much impossible to do sadly. :/
@@M539RestorationsIt’s a damn shame, that would've looked amazing.
The E46 M3 Touring is also Chrome Shadow.
I love your Spanish….I speak enough to get me around when I was in Spain, holidaying…..you are the perfect man for any restoration or fixing BMW’s…..
Streten to the entertainment rescue! Merry Christmas my man!
I hope the new year brings you and your good lady everything you want!! Srećan Božić
I had the pleasure of being a passenger in an e60 m5 once, the engine and exhaust noise gave me goose bumps. It’s absolutely the best sounding engine in any car ever, if only my pockets were big enough to have one. For the E46 rev matching you need to do an ICV delete and a tune to follow, which makes it easy.
@30:10 - I got really curious to see if the V10 badge made it back to the garage :D
Sreten, as much as you love everything about that E60M5. Nothing comes even close to the looks of your E39M5, what a stunning car that is. Simply amazed.
No sólo eso la calidad de materiales es sumamente superior en un e39 para muchos lo mejor en serie 5 que a echo BMW quitando por supuesto tecnología cada mes sale algo nuevo pero no por eso es mejor por ejemplo la caja cambios de ese E60 aún siendo más moderno la automática es una porquería donde a cada cambio el retroceso se nota mucho casi un golpe y según e visto en muchísimos videos lo más importante la fiabilidad de uno a otro nada que ver
No argument there, I love the look of the E60 M5, but to me, E39 M5 is absolutely better looking.
Back to back episodes? I must have been good this year. Santa (Streten) has delivered two glorious gifts. Also, I can't get enough of the Mutzi cameos.
And here I am thinking that these holidays couldn't get any better!
The E60 M5 content always want to make me watch the top gear review. The best top gear review, with the best car, ever!
Didn't expect one more video this year. Lovely! BTW, with Eventuri microfiber air intakes it sounds even better 🙈
Hi Sreten - our buddy Adam Bajrak gave me a great tip about bleeding the power steering fluid circuit.
Don't start the engine. Fill the reservoir and unlock the steering column with the key and turn it lock to lock a couple of times and it will get most of the air out of an otherwise drained system. You probably need to top up the reservoir a couple of times while doing this with the engine off. This saves the pump from cavitating on startup.
Love the channel!
Pete from Mt. Airy MD
Thank you. This doesn't work with the E60, I tried.
Love your channel. Great content edited to deliver quickly without losing detail. The perfect balance.
I usually go lock to lock before turning the car on, get some fluid into the rack. It has helped with the frothing and cuts down on a lot of the whining.
Thank you for sharing this mighty V10 induction, fly by and Autobahn sounds. Gave me ghostbumps and emotions just by watching your video. Hoping to get in this position, someday 😬
PS: looking forward on the video when you install the carbon box and different filters.
Wow I love that Twingo, thats a rare color. Very popular cars here in Colombia! Cheers Sreten
I thought I was happy with my Subaru and Audi, but your enthusiasm for older BMWs makes me want to buy one too! 😆
on pump bleeds it can be very helpful to elevate the front end of the car a couple feet encouraging bubbles to travel to the high point in the system. also the wheel should be turned slowly lock to lock several times before starting car. then after starting let it idle until fluid temp can increase before turning wheel. hope that helps
I was very intrigued to know how the engine badges had been broken, until the min. 22. The new carbon fiber intake is beautiful! I congratulate you on the improvement but the new badges are going to fly away soon too!😅
Regarding windshield wipers, I only use the BMW original ones - my experience is that they last so much better than any aftermarket ones - tried a bunch of brands but the last ones from BMW were still in good condition after 4 years and 80000 kms, no sqeak and they still wiped off the rain as they should.👌
Streten, you’re an absolute legend! I will never tire of hearing that V10 symphony!
Everybody talks about your mechanical skills, but nobody talks about your driving skills, i wish i could rev match like that im still learning
Imagine owning 2 BMWs
Imagine owning 2 Ms
Imagine both are broken💀
It's a symphony of emotion
Well, thats BMW 🤣
Imagine having two other M that doesn't work. 😅
Poetry
oh he has more than 2…😭
What makes the world great today is that I can get entertainment out of your passion, you can make a living, teach others, and live your best life. Happy New Year! I think in the old days they would call that art! You're an artist!
GREATEST CHRISTMAS PRESENT! Doesnt get better than this. Happy holidays Sreten 😀
500K subscribers Streten! Many congratulations and very well deserved. This is, by far, the best channel of its kind on YT.
Name change to M560 restorations incoming 😂
I was so cloae to rolling the dice and buying a V10 M5 but here in Australia they are all SMG :( and watching you drive yours confirms that manual is always the way to go, ALWAYS. Your channel is my favourite content to watch by far so I am even tempted to support your advertisers maybe starting with an intake for my GR Yaris.
OMG this V10 sound really never gets old😊
Amazing!
Thanks for the experience Sreten!
The only problem is that now the prices going up due to your presentation haha 😂
the atf/mtf mix made my e36's zf feel so much better, great tip! i used redline for both fluids
As always, great content! Keep up the good work Streten. Enjoy time with family and friends, and until the next one in 2024
Sounds Mint ...The Springs and roller are on the shedule to replace them. had the same issue with a M3 Box a long time ago.
2h 7k likes what a dedicated community we are! I just can't believe that you drove my dream car trough Latvia!!! Much appreciated I would love to buy D3 Alpina 2009 for 7900 EUR with 279,000 km on it so, I have general idea of what I am getting into thanks to your videos. I will never own a BMW but my dream car is Alpina 7 series before 2012
A good tip for bleeding ps fluid. When you go to start the car for the first time, start it for a few seconds and turn it off, add a little more fluid, and then replete until you fluid level no longer drops. This way you prevent air gettin sucked into the system and causing the whining noise and making your fluid bubble.
That's a relief! Last video when you told us that the e39 m5 was broken ... depressing! But now, everything is fixed again - and a video out at Christmas: You are the King of repaired BMW's! :-)
Gotta love the E60... I have always had a weak spot for it. Only thing I'd change on your car is the wood trim. I Have always preferred aluminium or black gloss... especially with cars from this era wood can look a bit cheap imo.
I remember when I was a kid we were in traffic (stau) on the Autobahn, an E90 M3 and an E60 M5 with Eissenman exhaust stood still, next to each other and waited for a little while. They were holding up everyone who was behind them for a couple of minutes untill they had a couple of hundred meters clear road. One guy had is hand out the window counting down and then they drag raced... I opened up my window to hear the exhausts. For me as a kid it was such a cool experience, especially the V10 noise
Nice to see Mutzi again. We missed her!
There it is, 500.000 subscribers! Crazy how this number went up in the last weeks. I am one of the new subscribers having found this channel just recently (what a shame) and I am already addicted 😁
Great content, thank you very much for this, well deserved 500k, keep on going!
My boyfriend waches you regularly and now because of little cute doggy Mutsy we are watching it together 😅😘
love your vids! 25:25 is actually a heat blanket, the hoods are designed with those plastic clips that will melt, in case of fire, and then it will fall donward ontop of the eingine, the only other thing holding it the little flaps on the botom
Beautiful microfiber intake plenum! ❤
Sreten. Thank you so much for all you do for our entertainment and edumacation.
You have me wanting to change out the transmission oil in my not- quite- daily driver 1991 Mercedes 250TD now, to your "patented" 50/ 50 transmission and ATF fluid combo. But i drive the 30 year newer BMW 535i more frequently so that's a down the road thing. Unless i give my BMW to my brother ...
Both my M5s broke down is a pretty special flex 😅
BOOM!! 500.000 subs! Congratulations bro! you deserve all the success thats coming your way :D
Much awaited, much appreciated looking forward to excellent work as always from you.
That e60 m5 gave me goosebumps after the new carbon fiber intake install. sounds phenomenal !
Sreten, you’re not helping my case against my friends with civics
Jokes aside, Merry Christmas, I hope you’re doing well!
Man Sreten, this car is a work of art. What a wonderful sound. You're videos are also a work of art. Love this.
I‘m a technician: try this: before you start the engine just lift the car from the ground an turn the whel from lock to lock 30 times and ad oil if necessery. Then start the engine and do the procedure again an keep an eye on the fluid level. Works ever time!😊
I do the same on my E61 and Z3. Engine off. Turn lock to lock several times until the fluid stops dropping. Running the engine too early just creates bubbles and lots of noise.
I did, and I do the same, it doesn't make a difference on the E60 and E92. It's easier to use your steering wheel since the car is already in the air. :)
Sreten I had to stop watching your vids months ago bc it reminded me of all the work I need to do on my car, but couldn't afford to do...hopefully in the new year my raise will allow me to get it running closer to Sreten standards 🤞
Congrats What a car!!! Sounds amazing 🎉
The M5-V10 and Porsche Carrera GT absolute singing engines that give ear-gasms.. Happy Holidays !
Welcome to the CF club, it was just matter of time that you found the proper representation. It's just a wonderfully acoustic material when manufactured properly. OEM quality with just that little extra.
Because of the temperature difference during the winter your engine bay will be constantly wet. This sound insulation allow the temperature to escape slowly and oder than sound proofing that is its second job. Once removing it there will be a lot of condensation. :)
Thank you! I don't see that being a problem, I haven't noticed anything different. The M3 doesn't come with one from the factory and I haven't heard of condensation being an issue.
@@M539Restorations I'm sharing a bad experience I had. Maybe the problem was different for me. Who knows? 🤷🏼♂️
@@ТеодорПетров-у4ъ okay, good to know. I'll keep an eye out! Thank you!
I love how Project Raleigh was a trashed beater when you first got it. You've now built it back into it's glory.
Hate it when such a tiny part can create such havoc.
Living in the far north, I had a good laugh when you said the E60 chassis was very well protected against rust lmao
Well, anything made of metal will eventually rust when exposed to a lot salt abuse, but I'm yet to see an E6x that can rust as badly as e39 or e46.
Sreten, you are simply the best! It is an absolute pleasure to watch and listen to you work on your cars. You have The best attitude. Thank you so much! Happy New Year and all the best!!
you should get that microfibre intake for v10 too probably would sound as amazing
god damn haha
CARBONfiber for god sake! It’s not "microfiber" 🙄
@@DavidStutzmann You don't know what you're talking about. Carbonfiber is towel material.
ffs, do you not watch the videos?
It already has it
@@SolarAB
Love this. Too many channels restore the cars once and never see updates and repairs on them again.
My favourite person on UA-cam. Thanks for keeping us glued to your channel in 2023. All the best for 2024! Stay safe, my friend.
Fenomenale job mate . Inspired by you so i started doing all de repairs myself on my g31 540i . Will be doing the flexdisk tomorrow 😊
Great info to know about the E39 transmission. There are a few us in this area with them and so far no issues transmission wise but we all know it's coming... either that or rod bearings.
Wow that V10 is phenomenal. We've got some goosebumps as a Christmas gift. thank you Sreten.
It’s nice to know that I’m in the minority of having an old bmw that is currently leak free, it’s an e36 325tds with the mighty M51 diesel and it’s taken some time and money but is officially leak and rattle free! Not without issues, but sadly there are a huge amount of parts than are unobtainable. But I wouldn’t have it any other way! I’d also love to see Sreten install the eventuri air intakes to match that beautiful plenum also!
Good to know that there are real Petrolheads left on the planet. Modern BMWs no longer give you goosebumps with their fake bangs and Christmas tree lights. Love your channel!
Sreten, your Angel Eyes are blinking when off (@43:58). You can code this out by disabling the cold check with for example BMW Scanner 1.4
When he said while removing tensioners " i think you know what we have to do here" i was beging for him to clean them up with that jet. Oh god. Thank you.
Your V10 emblem is about to fly off off the plenum. That carbon fiber is really flexing a lot under WOT blips.
My friend, I see the intake badges flopping when you were giving us that beautiful symphony. Please review the video to confirm the badges. Amazing work and keep doing what you are doing.
Sreten you truly are a MASTER BMW TECHNICIAN. I love your work and attention to detail. By the way as an ARMY mechanic there is nothing wrong with an engine or a transmission chewing old broken parts lol. Happy New Year Brother!
20:01 misha just chilling back there
E39 with S85 would probably be the best m5 combo. Pre-lci f90 is up there, but it’s the shape of the E39 that I love the most.
Always a great day when Streten uploads a new one!
Alpina B7 in the background looking great!
So those cracks will probably occur on the new plenums if you keep the badges on. You can see where it stiffens and causes waves in the video.
OK. I’m switching over to m560 restorations. Not a fan of the microfiber look but what a beautiful sound!
24:00 for ultimate cleanliness always use carbon fibre towels!