I have had my P10S and P10C OR for 4 years now. The S is my favourite. About 10.000 rounds through both of them, one malfunction due to cheap an bad ammo from Serbia. Cheers from Sweden 🇸🇪
Love this review.. reminds me I made good decision on picking out this gun. Unfortunately I don't have the one with the optics ready but I'm not a big fan on red dogs on pistols. I love the P10 S shoots remarkable and so accurate and zero malfunctions
I had one and also didn’t like the sights and it had just come out so there weren’t any mag extensions yet. And for some reason on that specific firearm, I couldn’t shoot very good with my pinky hanging off. It doesn’t bother me on most Micros but that one did. Thanks for the video
I own a CZ P-10 C ..I really don’t see comparing a P-10 S to a Glock .. the CZ 10 series is alot more pistol than a Glock Glock has junk Sights.. total plastic junk , triggers on the Glock .. even though I’m good with the Glock triggers .. they aren’t not even in the same class as the CZ P-10 series… The CZ P-10 F , C & S series is only 2nd the the PCP But to me the CZ P-10 series has a much lower bore axis when compared to the PCP .. so the CZ P-10 series is my top choice And I own a dozen Glocks . they are fine utility / duty pistols .. but not refined.. just base pistols I actually prefer my Daggers over my Glocks..better grip frames and slides The CZ Series is just leaps and bounds over Glocks CZ -USA just needs to get in the game , their cooperate management sucks .. zero marketing Thanks again for sharing your knowledge
Just found out the hard way that the TLR7A does not fit without modifying one the adapters that comes with the light. After modifying it feels solid, but I’m still not sure about having only half of the picatinny slot in the gun filled.
Is the Hive extension the best option for base plates for the CZP10S??? Also, what iron sights are you planning on installing on this one??? I just picked one up and it's a MOS model. You have to get a plate to install a "dot". I wish they would fit flush! Oh well... Have a great weekend! 🤠
Would you mind doing a comparison video with similarities and differences between the following 3 guns: CZ P10S , M&P(9/40) C and the XDM elite 3.8 compact. That would be a good video of your double stack sub compacts with 12 plus round capacity. Thanks
Common issue with EVERY utube pistol reviewer. No matter the pistol, everyone says they do not like the sights. Every utube review. Add trigger to that nitpick. I liked your presentation, I'm about to order a green P-10 S. Wonder if I'll be selling my G26 Gen5 afterwards?. But not my 2075RAMI. Good job 💥🎯👀⚖️🗽☮️🇺🇲
How much did you pay for this pistol? I’m looking at one and it’s close to 500…seems high since I’ve been watching vids and most people saying 300…just trying to compare prices and not over pay for it. Thnx in advance
Great review, as always. I haven't seen you do a review of the CZ P10c. Will you be reviewing this one soon? Thank you! I'm looking forward to seeing more. ME, North Georgia
Question - I like the look with the mag extension, but at that point, shouldn't you just go and get the P10C? If they're the same size in the grip at that point, personally I'll take the 4 inch barrel. And they're basically giving them away right now (early September and a major website has the P10C for $317)
I like have a shorter barrel so I’m more comfortable all day. Also, if I need to conceal it better in the summer or somewhere I have to go I like being able to change out the mag for the 12 round mag. You can do that with the larger models. This model can always get bigger, the larger models can never get smaller
Had one, sold it. I love CZ's but this one was not a joy to shoot, really did not fit my hand, The CZ P 10C is a much, much better feeling and shooting gun!
Depending on where you live you can order 12 round magazines or 15 round magazines from the P-10c they fit as well When I bought my P-10s it didn't come with any magazines so I had to buy 10 round mags then I found out the 15 round mags fit with the Magazine sleeves
Went with my buddy to shoot his brand new P10s and we got slide locks the whole time with less than 50 rounds through it. Problem was with the slide lock spring not seating well...seems to be an issue with the CZ P series in some cases. Very nice pistol but sorry...I will not trade it for my G26 gen 4 for EDC as I personally think its not as reliable.
I had the same issue with my P10s. Shot only 30 rounds out of it. The slide lock spring was out of place. Sent it back to CZ and they say they needed to adjust the spring. I haven’t shot it since I got it back. My confidence is really low though.
I have 4 CZ P10s and had to send 2 of them back to the factory for warranty work. Once the issues were fixed the reliability has been 100%. I’m not happy with initial build quality but the design of the gun is good and I trust them to go bang every time.
The S is an incredible shooting gun. The recoil is smooth and very controllable so follow-up shots are very easy as the gun comes right back to target. I do carry mine about 2/3 of the year. I don’t carry it much in summer as it is thick and heavy. When it’s hot out I switch to my P365XL.
@@mavrikmavrik3032 Interesting. I guess as long as it’s corrected and no issues after warranty fix I’m fine with keeping it. I really like the way it shoots. I’ll stick with it. Thanks!
I have had my P10S and P10C OR for 4 years now. The S is my favourite. About 10.000 rounds through both of them, one malfunction due to cheap an bad ammo from Serbia. Cheers from Sweden 🇸🇪
Thank you so much! As always Great review! still waiting on my Hyve basepad. Totally agree with the sights, I plan on replacing mine. 👍🏻
Love this review.. reminds me I made good decision on picking out this gun. Unfortunately I don't have the one with the optics ready but I'm not a big fan on red dogs on pistols. I love the P10 S shoots remarkable and so accurate and zero malfunctions
Thank you for a very helpful video.
The stock mag's base plate extends down to the length of the back part of the grip. So the grip is about 2 1/2 fingers. Maybe 3 for some people
I have the CZ P-10 S, I absolutely love it 👍🏾👍🏾👍🏾..Great video bro
man, I am thinking of getting one. what color did you go with? that green looks nice but that FDE just talks to me
@@TheFloridaBikeVlogger I've never seen a green one.
I had one and also didn’t like the sights and it had just come out so there weren’t any mag extensions yet. And for some reason on that specific firearm, I couldn’t shoot very good with my pinky hanging off. It doesn’t bother me on most Micros but that one did. Thanks for the video
No problem! Thanks for watching. Always good to hear from you
Great review, knowledgeable, comments, confirming my beliefs, and my choice thank you
No problem! Thanks for watching! Lots more to come
I own a CZ P-10 C ..I really don’t see comparing a P-10 S to a Glock .. the CZ 10 series is alot more pistol than a Glock
Glock has junk Sights.. total plastic junk , triggers on the Glock .. even though I’m good with the Glock triggers .. they aren’t not even in the same class as the CZ P-10 series…
The CZ P-10 F , C & S series is only 2nd the the PCP
But to me the CZ P-10 series has a much lower bore axis when compared to the PCP ..
so the CZ P-10 series is my top choice
And I own a dozen Glocks . they are fine utility / duty pistols .. but not refined.. just base pistols
I actually prefer my Daggers over my Glocks..better grip frames and slides
The CZ Series is just leaps and bounds over Glocks
CZ -USA just needs to get in the game , their cooperate management sucks .. zero marketing
Thanks again for sharing your knowledge
Solid review!
Just found out the hard way that the TLR7A does not fit without modifying one the adapters that comes with the light. After modifying it feels solid, but I’m still not sure about having only half of the picatinny slot in the gun filled.
Olight Baldr Mini 👍
Is the Hive extension the best option for base plates for the CZP10S??? Also, what iron sights are you planning on installing on this one??? I just picked one up and it's a MOS model. You have to get a plate to install a "dot". I wish they would fit flush! Oh well... Have a great weekend! 🤠
Would you mind doing a comparison video with similarities and differences between the following 3 guns: CZ P10S , M&P(9/40) C and the XDM elite 3.8 compact. That would be a good video of your double stack sub compacts with 12 plus round capacity.
Thanks
Common issue with EVERY utube pistol reviewer.
No matter the pistol, everyone says they do not like the sights. Every utube review. Add trigger to that nitpick.
I liked your presentation, I'm about to order a green P-10 S. Wonder if I'll be selling my G26 Gen5 afterwards?. But not my 2075RAMI.
Good job 💥🎯👀⚖️🗽☮️🇺🇲
Nice review 👌
How much did you pay for this pistol? I’m looking at one and it’s close to 500…seems high since I’ve been watching vids and most people saying 300…just trying to compare prices and not over pay for it. Thnx in advance
Greetings, I ask you where I can buy the extension of the magazine for Cz P10s ? I am from Puerto Rico.
ive got mine p10s. how to order that hyve mag extension?
Great review, as always. I haven't seen you do a review of the CZ P10c. Will you be reviewing this one soon? Thank you! I'm looking forward to seeing more. ME, North Georgia
I appreciate that man! and I can work on
It! Respect
Question - I like the look with the mag extension, but at that point, shouldn't you just go and get the P10C? If they're the same size in the grip at that point, personally I'll take the 4 inch barrel. And they're basically giving them away right now (early September and a major website has the P10C for $317)
I like have a shorter barrel so I’m more comfortable all day. Also, if I need to conceal it better in the summer or somewhere I have to go I like being able to change out the mag for the 12 round mag. You can do that with the larger models. This model can always get bigger, the larger models can never get smaller
Which site has it for $317?
What major website had it for $317 ?
@@TADDs101 grab a gun has the P10C and P10S (Not OR) for $350 but $20 off if you subscribe to their newsletter. Not bad.
@@TADDs101 Kygunco
What kind of night sights did you buy? I’ve been trying to find night sights for the p10s and can’t find any anywhere
Check Night Fision and XS sights
Superb firearm 😊
😮
Had one, sold it. I love CZ's but this one was not a joy to shoot, really did not fit my hand, The CZ P 10C is a much, much better feeling and shooting gun!
Narrow rear notch is slower and the stock sights suck. Have 2 F's, a C and an S.
lol the kid screaming in the background.. lol
That would be my son, they go outside and play when I film! Probably was in the sandbox right outside my window
Is this small enough to pocket
No.......I have one
Right?
Why did my P10-S come with 10 round mags?
Probably it's because you ordered the low capacity version (model 01560) and not the regular capacity version (model 91560).
Depending on where you live you can order 12 round magazines or 15 round magazines from the P-10c they fit as well When I bought my P-10s it didn't come with any magazines so I had to buy 10 round mags then I found out the 15 round mags fit with the Magazine sleeves
I’m pretty sure mine has trillium sites..it’s a cz p10s
Mine don’t. Mine need to charge. Tritium doesn’t need light to show in the dark
Went with my buddy to shoot his brand new P10s and we got slide locks the whole time with less than 50 rounds through it. Problem was with the slide lock spring not seating well...seems to be an issue with the CZ P series in some cases. Very nice pistol but sorry...I will not trade it for my G26 gen 4 for EDC as I personally think its not as reliable.
I had the same issue with my P10s. Shot only 30 rounds out of it. The slide lock spring was out of place. Sent it back to CZ and they say they needed to adjust the spring. I haven’t shot it since I got it back. My confidence is really low though.
I have 4 CZ P10s and had to send 2 of them back to the factory for warranty work. Once the issues were fixed the reliability has been 100%. I’m not happy with initial build quality but the design of the gun is good and I trust them to go bang every time.
The S is an incredible shooting gun. The recoil is smooth and very controllable so follow-up shots are very easy as the gun comes right back to target.
I do carry mine about 2/3 of the year. I don’t carry it much in summer as it is thick and heavy. When it’s hot out I switch to my P365XL.
@@mavrikmavrik3032 Interesting. I guess as long as it’s corrected and no issues after warranty fix I’m fine with keeping it. I really like the way it shoots. I’ll stick with it. Thanks!