I'm currently fighting with HP about this and have threatened to take them to the Fair Trading authorities in Australia for misrepresenting the components that the machine ships with, its XMP capability, and upgradeability. I'll let you know how it goes.
@@HardwareSense I don't have Insta, but I'll give you the short story here. I have forced HP to supply me with 2 x 8gb RAM sticks (their HyperX part) to compensate me for the money I spent on parts (genuine Kinsgston HyperX that looks identical) that should have worked fine based on the specifications of the machine as advertised. They told me today that I'll receive them within the week. They have also promised to escalate my request for a bios update that properly enables XMP and support for non-HP issued RAM, though I'm not holding out much hope that they'll actually do this. If they don't do this within a reasonable timeframe, however, I will consider further steps.
Don't forget you cannot control the Case fan speeds either. The Omen software only controls the GPU fans and even MSI afterburner and fan control will not find your case fans since the Omen MB does not have RPM sensors on the fans.
Thanks for the video and your posts across the HP forums HWSense! I was able to tighten timings on the stock hyper X ram that shipped with the 30L to 16-18-18-37 @ 1.35V 3200Mhz through Intel XTU. Ram Latency was the biggest disappointment with this prebuilt, but there is a fix! Ram latency 256 is down from 65ns to 54ns. Running stable!
How were you able to do it? Memory doesn't show up in Intel XTU for me, and I can't find a safe link to download the previous versions that people say they have used.
I used the procedure in this video by JDWTV; ua-cam.com/video/5d0xWNXHFlI/v-deo.html After completing the procedure twice (which was weird, but it worked) it rolled back to the version of Xtu that allowed access to the memory timings window. There I manually added the timings and crossed my fingers. Good luck. Edit: in the comments of that video there is some discussion about it.
@@maximousf1756 Memory does show up in Omen Gaming Hub for me, the issue is that it says that 3200MHz is running there due to XMP, when it is in fact JEDEC with horrible latency. XMP doesn't seem to be enabled on the machine as far as I can tell. I just spent a whole week fighting with HP about this, and they seem to have listened - I'll let you know what the final outcome is. It took me threatening to take them to the Fair Trading authority here in Australia with a detailed case for false advertising and potentially anti-competitive behaviour.
@@YetMoreCupsOfTea oh yes, I am with you 100% on the ethics of the situation. It should have shipped with a motherboard BIOS configuration that gave us access to proper XMP, it didn’t. I grappled with this problem for some time after purchasing the 30L with 32Gb of ram in February 2021. The conclusion I came to was an acceptable resolution that enabled me to apply a 16-18-18-37 @ 1.35V 3200 Mhz memory profile through a rolled back version of Intel XTU. This profile IS a XMP profile on the identical memory shipped by HyperX with serial numbers that do not start with “HP”. This can be done. I recommend downloading CPUz and inspecting the memory tab. There you will see a series of memory profiles for the “HP” S.N. hyper x ram. one of which is the JEDEC profile you are currently stuck with. There are others, even an XMP profile that you cannot access through Omen Command Center. did you have a chance to look at the JDWTV video and my comments there? Edit: I wanted to add that; once you have Intel xtu rolled back and working, don’t touch omen command center. Intel xtu effectively replaces it at that point and if you continue to use it there may be conflict. Apply any overclocking and undervolting via Intel xtu. Good luck.
To clarify, my problem was the very poor memory timings of the RAM that shipped with the PC, I have not tried replacing it with new ram. I don't know if you'd be able to use the rolled back Intel XTU to set the memory speed of other RAM kits to 3200Mhz. What I did was change the memory timings on the stock ram from 22-22-22-52 @ 3200Mhz to 16-18-18-37 @3200Mhz. In benchmarks this led to a marked improvement (decrease) in RAM Latency.
@HardwareSense so now Hp has acquired hyper x fury, surely this should work now...www.kitguru.net/channel/generaltech/matthew-wilson/hp-acquiring-hyperx-from-kingston-in-425-million-deal/
Ryzen Master fixed this issue with me (32G upgrade @ 3200mHz) for anyone with AMD models. Another video taught me that u can't get ur speeds with Intel based models.
@@HardwareSense to my grandest of misfortune I researched, didn’t dive deep enough, where on their website would I actually buy the extra ram cause I couldn’t find it
@@HardwareSense one check, would you assume this would work? HyperX Fury 8GB 3200MHz DDR4 CL16 DIMM 1Rx8 Black XMP Desktop Memory Single Stick HX432C16FB3/8 www.amazon.com/dp/B07WJJ9CNG/ref=cm_sw_r_cp_api_glt_fabc_WSYKNPE0F3JDVKRA3PPQ?_encoding=UTF8&psc=1 I didn’t research so if it goes sideways it’s my fault.
I just upgraded today to 32gb using corsair vengeance rgb pro worker perfectly fine ram at 3200mhz when I opened task manger and I did also have xmp settings under the advanced tab in the BIOS
Hi there! I purchase the 30L at Best Buy this past weekend, is it possible to get Rid of the Hard drive and just get a bigger SSD? Fairly new to computers here
@@Yeet20001 i mean to be honest i dont think anyone has really made an in depth video on how to, i would imagine the reasoning behind as why is because this doesnt technically mean you are going to get the same performance as xpm profiles that give you stable timings automatically
Got mine last Friday 8/21/20 and I love it I got the AMD Ryzen 5 3600 I'm not a heavy gamer I only play World of Warships and my daughter play Roblox in it and my son play Train Sim and Farming sim. Planning to add more RAM since it only has 8gb but other than thatI will baby this one because I'm planning to keep it for a long time. Thanks for the video!
Get an exact matching 8gb stick (check ALL specs), put it in, run auto-oc in Ryzen Master. I've done this, it's easy and works. It was a little hard to find a single 8gb stick but I found one on Office Depot.
Thank you sir for the great video. I recently purchased the i9-10850K with 32GB of 3200Mhz memory and yes for gaming it does get toasty especially when playing Microsoft Flight Simulator in 4K set to ultra. My question for you, is this memory slow. It's using Kingston memory but the CAS Latency is 22.0, that does seem slow doesn't it? Anyway thanks again !
It is not ideal having the CL22, but honestly in gaming the difference will be very minimal. I am going to have a future video comparing CL22 vs CL16 in games
Hi there. Thanks for this grate advice. I bought the AMD version last week. Can you advice me how to upgrade and activate the RAM properly? Appreciate that
For you, and if you don't want to go through the route of buying memory from HP, you can can install AMD Ryzen Master, from there it's easy to use the XMP profile of your new memory.
I just have a quick question on RAMs. If i somehow manage to find the exact rams I already have, do I need to check the mhz as well or it doesnt matter? My PC has 2x8gb 3200mh. Now if I want to add another 2x8, do they have to be 3200mh as well? Thanks
@@HardwareSense I'm confused... I spoke with HP tech support and they said that the memory would just clock down to the original ram that was installed. For example my 30L has 16GB at 2933 default/3200 turbo, if I buy ram at 3600 speed it would just down grade to 3200. Is that correct from what you've seen?
You can run at 3200mhz if you but the same ram (hyperx) and probably others. You need Ryzen master then go to gaming settings set memory to 1600 then apply and you’re running 3200mhz without xmp
That's true for the AMD based systems, Intel ones use Intel XTU. Still that is a bypass and is not solving the problem HP created by not letting us simply use an XMP profile
Yeah I agree it’s super lame/greedy of them. I’ve actually been thinking about replacing the motherboard in mine but I’m not sure it’s worth the hassle
3 years have passed since that video was posted and I have the same problem with my Omen 45L now xD Unfortunately found this out few months after buying :/
Can you do a video on how to change the power supply the stock power supply in my omen is almost dead and I bought a 700 watt one and I wanna put it in.
Can I buy bigger memory at the same mghz...or am I stuck with what I have at default? I literally have only 2 games Installed and I'm already maxed out
Grr thank you. I was wondering over 3200mhz vs. 3600mhz. Looks like im stuck with 3200mhz. Though that being said i also only have the 1 8gb stick. So how much ram at 3200mhz should i get. 16gb or 32gb?
Well Sir!! Thank you so much for the video! I just bought a new computer and is the HP Omen 30L at best buys. 12-28-2021. So Now i am going to go back and cancel the other for the computer, and get my money back, thank you for the head up on this computer I can see that it has a lot of problems that comes with it. So thank you ones again, Sincerely the Max..
@@HardwareSense I have a new 25l i7 16gb ssd etc and I tried uninstall in device manager, older xtu etc and 3rd party would not go past 2400 can you help? I just bought a 16gb stick from someone that had everything matching hyper fury the timings everything and praying I get at least the stock 2933. Also how do I get RGB fans to work please I love my omen it's a month old and tried RGB lights and didn't work
@@HardwareSense it does have the new bios upgrade and when I added the Corsair it opened an advanced menu with xmp profiles however would only run at 2100
I have a 25L with F processor and Intel XT doesn’t work with it. My upgrade RAM is running at 2133 when the HP website says you should get 2666. Good job i got the HP cheap or I would be annoyed.
My 30L with the Ryzen 5800x automatically set new ram to 3200. I added 16gb of hyper x fury from amazon to bring it to 32gb total. Also, can u link the wifi6 chip you purchased? Thank you!
I am really nervous about this. I ordered my OMEN 30L Desktop GT13-1380z (Ryzen 5800x) with 8GB of RAM - since I wanted to upgrade it myself at a much lower cost. Hoping that HyperX Fury 32GB 3200MHz DDR4 CL16 DIMM will work with this (no RGB) - or does HyperX Fury with RGB also work?
Hello, great video, I am in the same boat, I have the 25L with the intel processor and wanted to upgrade my ram, so basically after reviewing your video my only choice at this time would be to spend extra money on hp website to get the memory ? or take a loss of speed and get it on amazon ?
So I used Ryzen Master to OC the ram I put Memory Clock and Fabric clock to 1600 and now it is showing 3200mhz hopefully that is safe to do but for now it works
Did you buy Fury X that not a part of HP? I mean the ram that DIY use to build theirs PC? It will work well with the 2x8GB RAM default (running at 3200Mhz?) Thank man.
No, you should be absolutely fine, as long as you initially configure it with the amount you want. The issue is only if you want to use your own memory later or buy an aftermarket memory to replace the stock one.
@@Eric-vn9sm Correct, you can, but you will either default on the stock memory speeds, or have to do the manual adjustment that I have in the video and description.
Hey my friend, I wonder if it would be possible to make the video showing this done for Intel using XTU? I heard from some that it isn't effective, but maybe this is because you have the later Z490 configuration. Thanks for bringing this up, have a 30l with a 3080 on pre-order but might cancel depending on how this turns out.
@@HardwareSense Thanks!!! Haha I did! felt like too good of a deal to pass up on, but this is now giving me a headache. Suppose I should have selected 32 GB then and there, but also.... HP should address the issue.
@@olivergrunbaven5327 I'm not 100% about, I believe from the 'omen center' program. I haven't messed with it too much. But I do know they updated a bunch of stuff a month or two ago, because it now let's me change the rgb on the ddr instead of saying 'an update is on the way to make this usable' . It does run a little toasty though, even with the liquid cooling
Thx for the answer, i tried several different things but coulden’t change the MHz on my ram even though they Are Cabable of running 3200 MHz. I Then discoreved ryzen master and overclocked to the preferreble speed. So still couldent do it in the omen center.
I was doing a lot of research and people advised to not get the intel version if you plan on doing upgrades, buy them custom given the bios are locked. With AMD you can upgrade, but you do have to tweak the memory speed settings.
I understand this is an older video and also the whole point of buying a pre-built is to have it fully customizable and ready to go at your fingertips, but couldn't you bypass this by changing the motherboard and just having an msi or asus BIOS instead of HP?
If you would have went with a Ryzen CPU you can use the ryzen master driver to adjust anything in your bios through their software. Intel requires you to do it through the bios itself
You’re returning your omen 30L to get a new machine, did HP charge you restocking fees?! I’m in the same predicament, needing to return the machine without incurring restocking fees.. thanks in advance..
@@HardwareSense could you help me persuade HP to take our machines as well? I really can’t afford to pay any restocking fees... I could use your help please.. I’d appreciate a text 1-562-413-0336
I’m really new to this in fact I got my omen30L yesterday and most of the storage was used up so I was gonna get some more storage but I don’t know what I need or what I need to do apparently I can’t get more memory what do I do
@@beanieboy9498 So for storage I will have a separate video, but is extremely easy. Get something like 1tb SSD and install it as a secondary drive and have all of your games there. HP already have the cables routed to the cages in the front.
Hi! I keep getting the message "unable to start because drivers are not present. Please install latest version of intel xtu" whenever I try to open it once I've installed it! I have the latest version and I'm not sure how to fix this. Please help!
Is the case ATX compatible? Buying a secondhand one of these for a great price and instead of dealing with the ram situation looks more reasonable to replace the motherboard and buy Corsair ram.
Hey Ivan! Good video, just gave it thumbs up! I have an Omen 45L with 16GB DDR4 3733Ghz HyperX Ram and wanted to upgrade to 32 so after reading reviews on Amazon I purchased Kingston Fury Beast CL19 DDR4 3733Ghz Ram which should be the exact same and at least 5 reviews stated that this Ram worked perfectly fine with their Omen 45L. My Omen however refuses to accept it. The pc gets stuck in a loop and it just reboots over and over and over again with no possibility to even enter Bios and a black screen. I've tried Slots 1&3 (same as original), then 2&4... then 1 stick at a time and nothing. It just does not work at all. The RGB does not turn on either on the new sticks when it reboots. When putting the old Ram back it just boots like normal again. Do you think it is possible to fix this?
The problem is HP is always very specific ram and finding a proper replacement is always a challenge. So what I did in the past is to try to get some HP ram from similar PCs off ebay or order different from Amazon and whichever one didn't work, I returned it.
looking at the graphics card installed it looks like it's using (what i assume) is one of the 12 pin connectors for the gpu? if i decide to upgrade in the future to a card with 2x 8 pin connectors what options do i have?
The 3070 comes with 12 pin connector, but HP are providing an adapter to 2x8 pin, whish is very nice btw, and the 3080 version comes with 2x8pin PCIe connectors.
@@rilenixx Yes 100%, but considering how cheap is the memory at the moment, $60 for 16gb 3200mhz, paying $158 for 8gb to HP seems insane. You better spend that 320 dollars for some super fast low latency memory and pop that in, even at slower frequency the transfer speeds will be better with CL 15 or 16.
@@HardwareSense Thank you so much for taking the time to explain everything to me. I just subbed. I just bought my son the 30l. Intel I710700k, 16 gb ram, rtx 2080 8gb super and has a 750 watt platinum psu. He just wants to game and stream. I found your video and very glad I found your channel.
I’m new and just ordered an omen with 16gb if I get the same ddr4 3200mhz will I be able to upgrade it easily im really confused your Help is greatly appreciated and I subscribed
If you buy the ram from HP you are fine and it will run at top speeds. If you buy from anywhere else that isn’t HP or HP certified you need a workaround. I used Ryzen Master but there are other options as you can see in this vid for intel and other stuff.
I bought 2 corsair 16GB 3200MHz ddr4. When I add them to 30L, find that my ram frequency drops from 3200MHz to 2133MHz. By the way, I use i5-10600k CPU. How can I deal with it?
Thanks for your video. Exactly what rgb capabilities do you lose? just the lights on the sticks of ram or the lights inside the case? I'm on the fence about purchasing a kit from HP
@@HardwareSense I have a 30L with 2 non RGB 8GB, Wanting to add 2 more 8gb RGB sticks. I undersand I can get 2 more 8GB Hyperxfury sticks, throw them in there and have all 4 sticks (2 oem, 2 from bestbuy) running at 3200mhz after I have downgraded drivers to older XTU. (Obviously only the 2 new ones with RGB will light up) Now I know I can't control the lights, but if they do turn on to some default lights....what is the lights? Do they default to a generic color or the animated rainbow thing?
@@HardwareSense awesome, thats what I wanted :) can you install the rams control software and change them independently of the other hp lights? Like if I bought this ram at best buy and threw it in a pc with no lighting at all, how would I control it. Presumably there is software the ram companies supply to control it?
@@666Demonshaker No, you can't control them separately, if you install anything aftermarket, you will have to use Intel XTU, otherwise both will default to 2400mhz
Necesito ayuda. Mi HP Omen 30L - GT13 - 1174 dejó de encender recientemente y sospecho que es la fuente de alimentación que necesita ser reemplazada. Verifiqué el modelo de la fuente de alimentación y es de Cooler Master con la siguiente información: Hp Post, No. L8409 - 001 Cuando busco ese modelo específico en Google, no aparece ninguna búsqueda, así que no puedo conseguir esa fuente de alimentación en particular. Dicho esto, como no estoy familiarizado con el proceso de reparación y reemplazo de PC para juegos, solo quiero saber qué otro modelo puede ser compatible con esta máquina específica. Al menos uno que sea de 550 W o superior pero que sea compatible con ese modelo específico de HP Omen 30L. Para quien quiera ayudarme proporcionándome un modelo, gracias de antemano 💜❤️.
Yes the motherboard controls everything, if you change it, it becomes a custom computer. Just remember to backup your Windows key as you will need when installing windows with the new motherboard
Technically the max would be the maximum supported by Z490 chipset, HP are giving 3200mhz, but if you have faster one, let's say 3600mhz, you can enable that with Intel XTU
I'm sorry but the most important question it is not the possibility of upgrading the type of Mhz per ram, but the quantity. What i mean is, is it possible to upgrade to eventually 128GB of the same speed ram? Like 32 x 4? Or is it limited to 64GB (16 x 4)?
Same thing I’m thinking about doing, but with 64 Gb. How are you liking it so far? I don’t do PC gaming though. I plan to use this for music production
@@incogneat For video production will be good, just keep in mind that if you have the i9 versions, it will run very hot. If you are with the Ryzen, you will be perfect!
If you have the AMD based one, yes you can. Just keep in mind that for the Omen 30L, you will have to remove the Omen Game Hub first, before you can install the Ryzen Master.
Hello, HardwareSense, and thank you for your video. I have an HP Omen 30L with 32 Mb RAM from factory and I've recently added 32 Mb more, HyperX Fury RGB 3200 MHz, CL16/18/18. As you say in your video description, I downloaded Intel XTU utility in order to activate the XMP profiles. I don't know what XTU version you have but I'm not able to see the XMP profiles in mine, latest version 6.5.2.40. I've tried to change some parameters, as the Memory Multiplier, but it did not work. What can I do? Thank you very much for your time!
There should be only one simple option in the XTU for memory on the left side, when you select it you will see the XMP enable and disable option on the right side
@@HardwareSense I guess I must be doing something wrong, because I'm uncapable to see the enable option. Just "Default" and "Custom" options. Thank you for your kind answer!
Hi, how easy or hard is this? I bought o en 30L with 16 gigs on BF sales but had assumed I could upgrade to 32 myself easily later. While I actually do have a tech background (computer engineering degree) 15 years ago, I have never built a computer and hadn't touched hardware since school. I think i saw one of your comments on the HP boards where you were warning not to mess with things and could destroy some things? If it's too difficult I imagine someone will offer this service for a hopefully fairer price than HP. Or is it mostly just folliwing the steps above carefully? Thanks for figuring this out and sharing your solution.
You can, but if you want to be able to control the RGB or easily enable higher frequencies, the memory has to be purchased from HP. Otherwise, you will have to use Ryzen Master on your own, to enable the XMP profile of the memory.
@@HardwareSense appreciate the response. Mother board replacements are always a option on these pics too right? Just gotta be careful with the size I'm guessing because of case?
Hey, HP recently dropped a BIOS update for this OMEN, and one of the fixes is listed as: "- Adds Non-HP memory OC support page under BIOS setup menu." Has anyone tried it? Does non hp RAM now work properly at the correct speed?
Hi. Quick question, will changing the motherboard solve this problem? I’m about to order the 25L and I have a feeling I will have the same problem if I want to upgrade my ram.
@@HardwareSense I’ve seen the motherboard installed and it’s HP8704, do you have any idea if 2080ti is compatible with that one? So sorry, I’m new to this thing and I’ve been trying to find an answer in the last 3hrs. 😞
@@oMacked No need for anything above 16gb unless you are a content creator, for games 16gb is plenty, well unless you want to play the Flight simulator
I'm currently fighting with HP about this and have threatened to take them to the Fair Trading authorities in Australia for misrepresenting the components that the machine ships with, its XMP capability, and upgradeability. I'll let you know how it goes.
Please do, thank you.
@@HardwareSense Is there a way I can contact you privately to update you?
@@YetMoreCupsOfTea Insta
@@HardwareSense I don't have Insta, but I'll give you the short story here. I have forced HP to supply me with 2 x 8gb RAM sticks (their HyperX part) to compensate me for the money I spent on parts (genuine Kinsgston HyperX that looks identical) that should have worked fine based on the specifications of the machine as advertised. They told me today that I'll receive them within the week. They have also promised to escalate my request for a bios update that properly enables XMP and support for non-HP issued RAM, though I'm not holding out much hope that they'll actually do this. If they don't do this within a reasonable timeframe, however, I will consider further steps.
@@YetMoreCupsOfTea Yeah they not going to give us XMP, at least not in this generation
Don't forget you cannot control the Case fan speeds either. The Omen software only controls the GPU fans and even MSI afterburner and fan control will not find your case fans since the Omen MB does not have RPM sensors on the fans.
You can’t do it with the intel but with a amd use the Ryzen master
Completely agree I have a great HP prebuilt but why no xmp even a slider to keep it simple
Exactly!
Thanks for the video and your posts across the HP forums HWSense! I was able to tighten timings on the stock hyper X ram that shipped with the 30L to 16-18-18-37 @ 1.35V 3200Mhz through Intel XTU. Ram Latency was the biggest disappointment with this prebuilt, but there is a fix! Ram latency 256 is down from 65ns to 54ns. Running stable!
How were you able to do it? Memory doesn't show up in Intel XTU for me, and I can't find a safe link to download the previous versions that people say they have used.
I used the procedure in this video by JDWTV; ua-cam.com/video/5d0xWNXHFlI/v-deo.html
After completing the procedure twice (which was weird, but it worked) it rolled back to the version of Xtu that allowed access to the memory timings window. There I manually added the timings and crossed my fingers. Good luck.
Edit: in the comments of that video there is some discussion about it.
@@maximousf1756 Memory does show up in Omen Gaming Hub for me, the issue is that it says that 3200MHz is running there due to XMP, when it is in fact JEDEC with horrible latency. XMP doesn't seem to be enabled on the machine as far as I can tell. I just spent a whole week fighting with HP about this, and they seem to have listened - I'll let you know what the final outcome is. It took me threatening to take them to the Fair Trading authority here in Australia with a detailed case for false advertising and potentially anti-competitive behaviour.
@@YetMoreCupsOfTea oh yes, I am with you 100% on the ethics of the situation.
It should have shipped with a motherboard BIOS configuration that gave us access to proper XMP, it didn’t.
I grappled with this problem for some time after purchasing the 30L with 32Gb of ram in February 2021.
The conclusion I came to was an acceptable resolution that enabled me to apply a 16-18-18-37 @ 1.35V 3200 Mhz memory profile through a rolled back version of Intel XTU. This profile IS a XMP profile on the identical memory shipped by HyperX with serial numbers that do not start with “HP”.
This can be done.
I recommend downloading CPUz and inspecting the memory tab. There you will see a series of memory profiles for the “HP” S.N. hyper x ram. one of which is the JEDEC profile you are currently stuck with. There are others, even an XMP profile that you cannot access through Omen Command Center.
did you have a chance to look at the JDWTV video and my comments there?
Edit: I wanted to add that; once you have Intel xtu rolled back and working, don’t touch omen command center. Intel xtu effectively replaces it at that point and if you continue to use it there may be conflict. Apply any overclocking and undervolting via Intel xtu. Good luck.
To clarify, my problem was the very poor memory timings of the RAM that shipped with the PC, I have not tried replacing it with new ram. I don't know if you'd be able to use the rolled back Intel XTU to set the memory speed of other RAM kits to 3200Mhz. What I did was change the memory timings on the stock ram from 22-22-22-52 @ 3200Mhz to 16-18-18-37 @3200Mhz. In benchmarks this led to a marked improvement (decrease) in RAM Latency.
HP locked Bios on ranges marketed as Gaming PC is stubbornness or stupidity. Hope they change that with RX 6700XT GPU updated systems.
Forgive my ignorance, but does this workaround work for intel based 30l? Reason I ask is you mentioned that you returned your omen 30l.
It does with a few new tricks, I am posting a video about it this week.
@@HardwareSense I have the Omen 30L with i7 and 32Gb Ram, but Intel XTU does not recognise my memory, so no XMP. Solutions?
@@TwinTenox If it's not showing the memory section, check my XTU video, the solution is there
@HardwareSense so now Hp has acquired hyper x fury, surely this should work now...www.kitguru.net/channel/generaltech/matthew-wilson/hp-acquiring-hyperx-from-kingston-in-425-million-deal/
@@martinchow4083 I saw that, hopefully there will be a good outcome for HyperX
I've been looking at this on and off for a while, this greatly helps thank you!
Yes absolutely, happy to help
Ryzen Master fixed this issue with me (32G upgrade @ 3200mHz) for anyone with AMD models. Another video taught me that u can't get ur speeds with Intel based models.
How
@@lachi3117 "how" what?
Any tips on the steps you take in the software to make this work? Thanks so much!
wow.... this is a major issue. I had the same thought.. got the pc the other day and noticed...luckily I went with the 16gb but this is a major issue
Yes you made a good choice to get the 16GB
@@HardwareSense to my grandest of misfortune I researched, didn’t dive deep enough, where on their website would I actually buy the extra ram cause I couldn’t find it
@@michaelproof ebay for ram with HP stickers on it and parts.hp.com
@@HardwareSense one check, would you assume this would work? HyperX Fury 8GB 3200MHz DDR4 CL16 DIMM 1Rx8 Black XMP Desktop Memory Single Stick HX432C16FB3/8 www.amazon.com/dp/B07WJJ9CNG/ref=cm_sw_r_cp_api_glt_fabc_WSYKNPE0F3JDVKRA3PPQ?_encoding=UTF8&psc=1 I didn’t research so if it goes sideways it’s my fault.
@@michaelproof Probably not
Thank you for this. It was very informative and helpful.
I have this pc and only have 8gb am I still able to put more ram in it as long as its the same Hyper X stick?
Yeah all you need to do is buy another 8 gigs and slap it on
Yessir I have 16 gigs rn
@@Snow-qz8xc it lowers the ram to 2600hz tho right?
@@Chriselchingon23 currently I have 3200mhz if you have an Instagram I can dm you a pic for proof
@@Snow-qz8xc Did you have to do anything special? Or it will recognize the new stick and run at 3200mhz by itself? Thank you.
I just upgraded today to 32gb using corsair vengeance rgb pro worker perfectly fine ram at 3200mhz when I opened task manger and I did also have xmp settings under the advanced tab in the BIOS
Hi there! I purchase the 30L at Best Buy this past weekend, is it possible to get Rid of the Hard drive and just get a bigger SSD? Fairly new to computers here
Yes that would be extremely easy. Is the hard drive secondary or primary storage, in order words, is the OS on it or not?
Totally possible I took out the lower hard drive slot to add another fan to the front. It took some cutting for vents and drilling holes for mounts.
@@Jake-mg8rk I’m doing this later this month !❤️💪
There are 2 slot bays for storage so you can just add it to the second one if available. Also there is an m.2 slot on the motherboard for ssd.
With an AMD chip you can use Ryder Master to change the memory clock on the ram up to 3200.
Yes I have a special video on it, thanks for the input
@@HardwareSense can you send me link to this video
@@HardwareSense I cant find this video, neither can the other commenter
@@Chriselchingon23 were you ever able to find the video?
if you are running a amd cpu you can change the speeds of ram through the ryzen master program
Yup very easily I might add.
Where can I find a video on how to?
@@Yeet20001 i mean to be honest i dont think anyone has really made an in depth video on how to, i would imagine the reasoning behind as why is because this doesnt technically mean you are going to get the same performance as xpm profiles that give you stable timings automatically
Good thing I purchased the 30L with 16gb of memory
Yes indeed, that was a good decision
HardwareSense would love to see videos of you upgrade the graphics card on the 30L when the new generation comes out!!
@@khalidkhalaf547 I promise you that I will make a ton of videos on all possible updates, including the new generation when it comes out!
HardwareSense perfect! You just got a sub
@@khalidkhalaf547 Appreciate the support!
Is this still an issue? I bought a upgrade kit with 16 GB of ram at 3200mhz and am not sure if I should return it
Have you found anything else online that solves this issue? I plan on upgrading as well
@@mrluistito2529 I think if you install ryzen master and then use that to over clock your ram it should work
Can you install extra HDD storage??
Yes you can.
After doing those steps in the description, do all I literally do is insert more ram? Sorry about all the questions
You need to install your new ram first before doing anything with the software
@@HardwareSense Thank youuu
So if I was only able to put in 8GB, before before doing these steps can I be able to put in 16GB now?
@@CraitMerc You can put up to 4x16gb I believe
Got mine last Friday 8/21/20 and I love it I got the AMD Ryzen 5 3600 I'm not a heavy gamer I only play World of Warships and my daughter play Roblox in it and my son play Train Sim and Farming sim. Planning to add more RAM since it only has 8gb but other than thatI will baby this one because I'm planning to keep it for a long time. Thanks for the video!
Happy to help
Get an exact matching 8gb stick (check ALL specs), put it in, run auto-oc in Ryzen Master. I've done this, it's easy and works. It was a little hard to find a single 8gb stick but I found one on Office Depot.
Make sure you get dual-channel(two memory sticks) it will boost the performance
Thank you sir for the great video. I recently purchased the i9-10850K with 32GB of 3200Mhz memory and yes for gaming it does get toasty especially when playing Microsoft Flight Simulator in 4K set to ultra. My question for you, is this memory slow. It's using Kingston memory but the CAS Latency is 22.0, that does seem slow doesn't it? Anyway thanks again !
It is not ideal having the CL22, but honestly in gaming the difference will be very minimal. I am going to have a future video comparing CL22 vs CL16 in games
Thanks for the reply HWSense, I look forward to that video. How will I know when you post it?
@@rodb3653 Sub and hit that bell notification 😉
@@HardwareSense Thanks and I subscribed to your channel. I also hit the bell. I don't know what that does but I did it.
Hi there. Thanks for this grate advice. I bought the AMD version last week. Can you advice me how to upgrade and activate the RAM properly? Appreciate that
For you, and if you don't want to go through the route of buying memory from HP, you can can install AMD Ryzen Master, from there it's easy to use the XMP profile of your new memory.
@@HardwareSense Thank you. I installed the software but not sure how to change the settings. Is there a link or something you can send me to do this?
@@amr3772 I am testing another one with AMD and will post a separate video for it, stay tuned.
@@HardwareSense Just to follow up... I got a stick of 8gb HyperX from another Omen 30L owner. Booted right up, showing 16gb at 3200, rgb works too.
@@luckydog9809 Yes that is definitely going to work as both memory sticks would be coming from HP and approved by them.
I just have a quick question on RAMs. If i somehow manage to find the exact rams I already have, do I need to check the mhz as well or it doesnt matter? My PC has 2x8gb 3200mh. Now if I want to add another 2x8, do they have to be 3200mh as well? Thanks
If you find the exact same ones, they will be the exact same ones, implying the frequency is the same, so you dont need to worry.
@@HardwareSense I'm confused... I spoke with HP tech support and they said that the memory would just clock down to the original ram that was installed. For example my 30L has 16GB at 2933 default/3200 turbo, if I buy ram at 3600 speed it would just down grade to 3200. Is that correct from what you've seen?
@@bc5635 No it will default to 2666mhz
@@HardwareSense 2666mhz even thought the base speed for the original ram is 2933mhz? BTW... Thanks for the quick response!
@@bc5635 Yes
You can run at 3200mhz if you but the same ram (hyperx) and probably others. You need Ryzen master then go to gaming settings set memory to 1600 then apply and you’re running 3200mhz without xmp
That's true for the AMD based systems, Intel ones use Intel XTU. Still that is a bypass and is not solving the problem HP created by not letting us simply use an XMP profile
Yeah I agree it’s super lame/greedy of them. I’ve actually been thinking about replacing the motherboard in mine but I’m not sure it’s worth the hassle
Thank you so much for the help when I bought new ram it was stuck at 2400 speed and now I put on 3200
@@Sloth482 Excellent!
3 years have passed since that video was posted and I have the same problem with my Omen 45L now xD
Unfortunately found this out few months after buying :/
Hi right now I have a 10gen cpu in my rig right now
I ordered a 11th Gen cpu it should work right after upgrade?
I am not sure if HP has released a Bios that supports the new generation CPUS
Can you do a video on how to change the power supply the stock power supply in my omen is almost dead and I bought a 700 watt one and I wanna put it in.
Sure thing, my replacement unit arrived today so there will be a lot of videos on it, stay tuned
hi, was this ever sorted?
wondering what PSU you bought. trying to find one with a rear facing fan since im not sure if it is good to have the hot air blowing into the GPU
Hey, do you know if Omen Commands Center, Memory Overclocking (XMP Profiles), only work with HP ram or also with Corsair Vengeance?
It only works with HP memory and it's not XMP, but JEDEC.
They have a new f20 bios update that now has aftermarket XMP ram compatabitly
can you tell me exactly what model wifi 6 chip you got , im looking to get one hopefully someone can tell me and or send me a link .
Can I buy bigger memory at the same mghz...or am I stuck with what I have at default?
I literally have only 2 games Installed and I'm already maxed out
Do you mean memory or storage?
Grr thank you. I was wondering over 3200mhz vs. 3600mhz. Looks like im stuck with 3200mhz. Though that being said i also only have the 1 8gb stick. So how much ram at 3200mhz should i get. 16gb or 32gb?
Well Sir!! Thank you so much for the video! I just bought a new computer and is the HP Omen 30L at best buys. 12-28-2021. So Now i am going to go back and cancel the other for the computer, and get my money back, thank you for the head up on this computer I can see that it has a lot of problems that comes with it. So thank you ones again, Sincerely the Max..
Before that watch my latest video if its Intel based 30L, you will be fine
@@HardwareSense I have a new 25l i7 16gb ssd etc and I tried uninstall in device manager, older xtu etc and 3rd party would not go past 2400 can you help? I just bought a 16gb stick from someone that had everything matching hyper fury the timings everything and praying I get at least the stock 2933.
Also how do I get RGB fans to work please I love my omen it's a month old and tried RGB lights and didn't work
@@umkane3851 I don't think that the 25L has the XMP capability, but maybe I am wrong
@@HardwareSense it does have the new bios upgrade and when I added the Corsair it opened an advanced menu with xmp profiles however would only run at 2100
@@umkane3851 What is your CPU
I have a 25L with F processor and Intel XT doesn’t work with it. My upgrade RAM is running at 2133 when the HP website says you should get 2666. Good job i got the HP cheap or I would be annoyed.
Make sure that ram you have is rated as 2666mhz jedec
Great video 👍🏼
Yes you can upgrade the memory did you go into bios and set the XMP Profile for the ram you installed?
There is no XMP in the Bios
My 30L with the Ryzen 5800x automatically set new ram to 3200. I added 16gb of hyper x fury from amazon to bring it to 32gb total.
Also, can u link the wifi6 chip you purchased? Thank you!
I am really nervous about this. I ordered my OMEN 30L Desktop GT13-1380z (Ryzen 5800x) with 8GB of RAM - since I wanted to upgrade it myself at a much lower cost. Hoping that HyperX Fury 32GB 3200MHz DDR4 CL16 DIMM will work with this (no RGB) - or does HyperX Fury with RGB also work?
@@smtalker either should work.. mine has the rgb
Hello, great video, I am in the same boat, I have the 25L with the intel processor and wanted to upgrade my ram, so basically after reviewing your video my only choice at this time would be to spend extra money on hp website to get the memory ? or take a loss of speed and get it on amazon ?
Check one of my latest videos for the Klevv memory
So I used Ryzen Master to OC the ram I put Memory Clock and Fabric clock to 1600 and now it is showing 3200mhz hopefully that is safe to do but for now it works
Yeah it should be fine
@@HardwareSense Thanks I have never done any overclocking before lol
@@errolmitchell3896 Don't worry about it, not that hard.
Can anyone do a how to video please?
@@JeroVazq How to video on what?
I'm gonna buy the I9 with the rtx 3090
Make sure to buy another case and a better AIO too
@@HardwareSense why?
@@rankithard8557 the HP OMEN has really really high temps with the shit stock cooler, plus the 3090 might be to big for the case.
@@bpw8214 what is the temp it usually gets?
@@bpw8214 the shit cooler is only in the cheaper builds not the absolute peak
have you used AMD Ryzen Master for upgrading?
it workes for me and I upgraded to 32 G.
Yes for AMD versions of the computer it can successfully be used
What ram did you buy?
I just got this pc yesterday and I’m new to pc gaming and I only have 257 GB of storage is there a way I can add more
Yes definitely, that's the easiest upgrade. I am having a video coming up on that.
HardwareSense 👌🏻
@@Chopkng6.0 if you still having this issue try switching download locations to your D drive lol
I Bought omen 30l with core i7 10700K and 3080, the ram work good. just buy another hyper fury x and not another type of ram
As long as it's with the HP part number sticker
Did you buy Fury X that not a part of HP? I mean the ram that DIY use to build theirs PC? It will work well with the 2x8GB RAM default (running at 3200Mhz?) Thank man.
Have you figured out a way around this?
So far only with Intel XTU software, there is no other way around it, till HP gives us Bios XMP enabled menu.
So if I purchase the omen 30L with 16gb will it show 16gb on the omen command ? Or would I need to download the ryzon master ?
No, you should be absolutely fine, as long as you initially configure it with the amount you want. The issue is only if you want to use your own memory later or buy an aftermarket memory to replace the stock one.
HardwareSense oh k yeah cuz it says it can go up to 32gb so u can’t upgrade it urself is what ur sayin
@@Eric-vn9sm Correct, you can, but you will either default on the stock memory speeds, or have to do the manual adjustment that I have in the video and description.
HardwareSense oh k ima get the one with 16gb i wouldn’t have to adjust the memory or anythin ?
@@Eric-vn9sm Yes would be good with the 16GB.
Mein Arbeitsspeicher läuft nur auf Max 1333 mhz - 4x 8 GB 3200 kingston fury -
I Need Help
Hey my friend, I wonder if it would be possible to make the video showing this done for Intel using XTU? I heard from some that it isn't effective, but maybe this is because you have the later Z490 configuration. Thanks for bringing this up, have a 30l with a 3080 on pre-order but might cancel depending on how this turns out.
Yes I will do a video on it. Did you get the $1400 deal on the 30L with 3080?
@@HardwareSense Thanks!!! Haha I did! felt like too good of a deal to pass up on, but this is now giving me a headache. Suppose I should have selected 32 GB then and there, but also.... HP should address the issue.
@@mawest I actually wanted to buy one too, but wasn't quick enough I guess
Can I upgrade the graphics card on this build ? To a rtx 2060?
Yes, absolutely.
I recently purchased one of these. You can now control the memory rgb and I believe some of the other issues have been fixed
How can you you control the memory mhz ?
@@olivergrunbaven5327 I'm not 100% about, I believe from the 'omen center' program. I haven't messed with it too much. But I do know they updated a bunch of stuff a month or two ago, because it now let's me change the rgb on the ddr instead of saying 'an update is on the way to make this usable' . It does run a little toasty though, even with the liquid cooling
Thx for the answer, i tried several different things but coulden’t change the MHz on my ram even though they Are Cabable of running 3200 MHz. I Then discoreved ryzen master and overclocked to the preferreble speed. So still couldent do it in the omen center.
If I got the HyperX ddr4 3200 MHz 8x2 and if I buy another set of HyperX 3200 ddr4 8x2 it should work ok? Sorry I’m really New and bad with computers
I was doing a lot of research and people advised to not get the intel version if you plan on doing upgrades, buy them custom given the bios are locked. With AMD you can upgrade, but you do have to tweak the memory speed settings.
It's pretty much the same situation, with AMD is slightly better as Ryzen Master is better to work with.
I understand this is an older video and also the whole point of buying a pre-built is to have it fully customizable and ready to go at your fingertips, but couldn't you bypass this by changing the motherboard and just having an msi or asus BIOS instead of HP?
Of course you can, but that means spending extra money on top of the $2K you are already spending.
If you would have went with a Ryzen CPU you can use the ryzen master driver to adjust anything in your bios through their software. Intel requires you to do it through the bios itself
Correct, but at the time, there was not much choice
DIdn't they fix this with an update? or am I confused?
Check my latest video
You’re returning your omen 30L to get a new machine, did HP charge you restocking fees?! I’m in the same predicament, needing to return the machine without incurring restocking fees.. thanks in advance..
They tried to, but I was more persuasive
@@HardwareSense could you help me persuade HP to take our machines as well? I really can’t afford to pay any restocking fees... I could use your help please.. I’d appreciate a text 1-562-413-0336
I've the same pc nowi have a problem with my monitor said no signal when i start playing game did you know why ?
Check the cable or switch to another port on the video card
thank you so much for responded but still not working.. every thing else funtion correct but i soonest i loggin to fornite the monitor goes black .
@@isaacleftnu Is it just one game that does it, and have you updated the drivers?
@@isaacleftnu don't play fortnite that games garbage
But they make it 3200 now
I’m really new to this in fact I got my omen30L yesterday and most of the storage was used up so I was gonna get some more storage but I don’t know what I need or what I need to do apparently I can’t get more memory what do I do
Storage or memory, what do you need help with exactly?
HardwareSense just cheacked it’s storage I’m really new to PC parts and stuff I don’t know where to buy storage or if I did buy it where to put it
@@beanieboy9498 So for storage I will have a separate video, but is extremely easy. Get something like 1tb SSD and install it as a secondary drive and have all of your games there. HP already have the cables routed to the cages in the front.
HardwareSense thank you 🙏
Hi! I keep getting the message "unable to start because drivers are not present. Please install latest version of intel xtu" whenever I try to open it once I've installed it! I have the latest version and I'm not sure how to fix this. Please help!
Try uninstalling it reinstall again
Is the case ATX compatible? Buying a secondhand one of these for a great price and instead of dealing with the ram situation looks more reasonable to replace the motherboard and buy Corsair ram.
It's mini ATX
Hey Ivan! Good video, just gave it thumbs up!
I have an Omen 45L with 16GB DDR4 3733Ghz HyperX Ram and wanted to upgrade to 32 so after reading reviews on Amazon I purchased Kingston Fury Beast CL19 DDR4 3733Ghz Ram which should be the exact same and at least 5 reviews stated that this Ram worked perfectly fine with their Omen 45L.
My Omen however refuses to accept it. The pc gets stuck in a loop and it just reboots over and over and over again with no possibility to even enter Bios and a black screen.
I've tried Slots 1&3 (same as original), then 2&4... then 1 stick at a time and nothing. It just does not work at all. The RGB does not turn on either on the new sticks when it reboots. When putting the old Ram back it just boots like normal again.
Do you think it is possible to fix this?
The problem is HP is always very specific ram and finding a proper replacement is always a challenge. So what I did in the past is to try to get some HP ram from similar PCs off ebay or order different from Amazon and whichever one didn't work, I returned it.
looking at the graphics card installed it looks like it's using (what i assume) is one of the 12 pin connectors for the gpu? if i decide to upgrade in the future to a card with 2x 8 pin connectors what options do i have?
The 3070 comes with 12 pin connector, but HP are providing an adapter to 2x8 pin, whish is very nice btw, and the 3080 version comes with 2x8pin PCIe connectors.
is it possible to add more ram
Hi, does your solution in the description of this video work with the 25L?
Yes it does for Intel, for AMD, I have another video
@@HardwareSense Thank you. Can you tell me that video? Also do you know if your solution works with the 25L GT12-0068na specifically?
@@CraitMerc Yes it does, look at my channel videos, it's for Ryzen Master
@@HardwareSense Thank you man, you just saved me a ton of headaches. I thought I would be stuck with 8GB Ram on my 25L
So if you buy the sticks of ram from HP then there are no issues? I understand their overpriced store but it is what it is.
It would be somewhat tolerable if the price was double, but quadruple, that's insane!
4x is crazy. But the memory upgrade will work from HP?
@@HardwareSense Thank you for your response. I'm grateful.
@@rilenixx Yes 100%, but considering how cheap is the memory at the moment, $60 for 16gb 3200mhz, paying $158 for 8gb to HP seems insane. You better spend that 320 dollars for some super fast low latency memory and pop that in, even at slower frequency the transfer speeds will be better with CL 15 or 16.
@@HardwareSense Thank you so much for taking the time to explain everything to me. I just subbed. I just bought my son the 30l. Intel I710700k, 16 gb ram, rtx 2080 8gb super and has a 750 watt platinum psu. He just wants to game and stream. I found your video and very glad I found your channel.
I bought the omen with the RYZEN and i changed the memory just fine.
And you got the full 3200mhz speed through the Omen Command Center? I highly doubt that.
@schmobbing Watch the video, you can't enable anything in the Bios.
Same for me, purchased the HyperX ram to add to ram, was able to add and enable to 3200 in bios.. not sure why he can’t seem to.. 🤷♂️
Also I can control my rbg on the new ram just fine.. weird
@@hyperion1170 Did you buy it from HP? Otherwise it's impossible
I’m new and just ordered an omen with 16gb if I get the same ddr4 3200mhz will I be able to upgrade it easily im really confused your Help is greatly appreciated and I subscribed
If you buy the ram from HP you are fine and it will run at top speeds. If you buy from anywhere else that isn’t HP or HP certified you need a workaround. I used Ryzen Master but there are other options as you can see in this vid for intel and other stuff.
I bought 2 corsair 16GB 3200MHz ddr4. When I add them to 30L, find that my ram frequency drops from 3200MHz to 2133MHz. By the way, I use i5-10600k CPU. How can I deal with it?
I think that is just a bios update to unlock that
Thanks for your video. Exactly what rgb capabilities do you lose? just the lights on the sticks of ram or the lights inside the case? I'm on the fence about purchasing a kit from HP
The LEDs will still illuminate, but you can't control them
@@HardwareSense I have a 30L with 2 non RGB 8GB, Wanting to add 2 more 8gb RGB sticks. I undersand I can get 2 more 8GB Hyperxfury sticks, throw them in there and have all 4 sticks (2 oem, 2 from bestbuy) running at 3200mhz after I have downgraded drivers to older XTU. (Obviously only the 2 new ones with RGB will light up) Now I know I can't control the lights, but if they do turn on to some default lights....what is the lights? Do they default to a generic color or the animated rainbow thing?
@@666Demonshaker They would do the rainbow by default
@@HardwareSense awesome, thats what I wanted :) can you install the rams control software and change them independently of the other hp lights? Like if I bought this ram at best buy and threw it in a pc with no lighting at all, how would I control it. Presumably there is software the ram companies supply to control it?
@@666Demonshaker No, you can't control them separately, if you install anything aftermarket, you will have to use Intel XTU, otherwise both will default to 2400mhz
I got the 30L with 16gb and rtx 2060, how can I overclock the ram and what are the best settings for gaming 😍 thank you in advance.
If it's Intel, the overclock is done via Intel XTU, if AMD, done via Ryzen Master.
Necesito ayuda. Mi HP Omen 30L - GT13 - 1174 dejó de encender recientemente y sospecho que es la fuente de alimentación que necesita ser reemplazada.
Verifiqué el modelo de la fuente de alimentación y es de Cooler Master con la siguiente información:
Hp Post,
No. L8409 - 001
Cuando busco ese modelo específico en Google, no aparece ninguna búsqueda, así que no puedo conseguir esa fuente de alimentación en particular.
Dicho esto, como no estoy familiarizado con el proceso de reparación y reemplazo de PC para juegos, solo quiero saber qué otro modelo puede ser compatible con esta máquina específica.
Al menos uno que sea de 550 W o superior pero que sea compatible con ese modelo específico de HP Omen 30L.
Para quien quiera ayudarme proporcionándome un modelo, gracias de antemano 💜❤️.
I just searched my hp motherboard and it says it’s capped to 2666 rip so I can’t use xtu 😕
What computer do you have?
What is the serial/item number for the 8gb of HyperX ddr4-3200? I’ve looked everywhere and cannot locate it on hp’s site
P/N L75928-001
Hi! I have the omen obelisk, if I change out my motherboard will it change the bios and then I’ll be able to change my ram speed or is it hard locked?
Yes the motherboard controls everything, if you change it, it becomes a custom computer. Just remember to backup your Windows key as you will need when installing windows with the new motherboard
i hope you answer. but so if u bought 2x8 sticks of ram in total of 16 gb 3200mhz and it doesn’t do 3200mhz. would u need ryzen master to solve it?
If you have a Ryzen based 30L, yes.
@@HardwareSense okay thank youuu!
Quick question is this saying its just impossible or if its 2400MHZ it will still function
You will get 2400mhz or 2666mhz by default with any aftermarket memory.
If an Intel Omen 30L comes from factory with 32gb, is it still slower than it should be? Or does it come at 3200 speed? thx
Any ram you buy with the pc will run at 3200
What is the maximum memory bandwidth supported by the motherboard? 3200Mhz, or is it higher?
Technically the max would be the maximum supported by Z490 chipset, HP are giving 3200mhz, but if you have faster one, let's say 3600mhz, you can enable that with Intel XTU
I'm sorry but the most important question it is not the possibility of upgrading the type of Mhz per ram, but the quantity.
What i mean is, is it possible to upgrade to eventually 128GB of the same speed ram? Like 32 x 4? Or is it limited to 64GB (16 x 4)?
64gb is the max
@@HardwareSense ah.. that's a bummer.. :\ i don't think i'll buy then
I am happy then i just bought one with the i9 and 32 Gb.
Good call
Same thing I’m thinking about doing, but with 64 Gb. How are you liking it so far? I don’t do PC gaming though. I plan to use this for music production
@@incogneat For video production will be good, just keep in mind that if you have the i9 versions, it will run very hot. If you are with the Ryzen, you will be perfect!
@@HardwareSense I’m about to show my ignorance here... the only option for i9 is intel core. Or, is that the same as you mention
@@incogneat i9 is Intel yes, it runs very hot with this case and cooling solution.
I bought the Corsair vengeance ram to swap out the 8gb with, will it be able to work if I use ryzen master
If you have the AMD based one, yes you can. Just keep in mind that for the Omen 30L, you will have to remove the Omen Game Hub first, before you can install the Ryzen Master.
I just bought this computer and it just keep shutting off and then takes me back to the log in screen
Sounds like problem that hopefully HP support can address
If I purchase from hp website do I just buy 1 or you saying I have to get 2 of the 8gb for that insane amount If I just want 16gb?
Yes you can buy just one of the same one you have, or you can buy any other amount.
So you're saying the 8gb stick i bought to match the existing 8gb stick is doing nothing for me? Im still very new to PC and im not very knowledgeable
The only thing that is doing is increasing the size, but your speed has dropped to 2400mhz
@@HardwareSense so if i take them out right now, will it go back to default?
Hello, HardwareSense, and thank you for your video. I have an HP Omen 30L with 32 Mb RAM from factory and I've recently added 32 Mb more, HyperX Fury RGB 3200 MHz, CL16/18/18. As you say in your video description, I downloaded Intel XTU utility in order to activate the XMP profiles. I don't know what XTU version you have but I'm not able to see the XMP profiles in mine, latest version 6.5.2.40. I've tried to change some parameters, as the Memory Multiplier, but it did not work. What can I do? Thank you very much for your time!
There should be only one simple option in the XTU for memory on the left side, when you select it you will see the XMP enable and disable option on the right side
@@HardwareSense I guess I must be doing something wrong, because I'm uncapable to see the enable option. Just "Default" and "Custom" options. Thank you for your kind answer!
@@pleidur Send me a screenshot
@@HardwareSense Done!
@@pleidur Saw it, what happens when you click custom?
Installing intel xtu does not allow me to change the voltage. Anyone had the same issue? Give me insight plz HardwareSense!
Never messed up with the voltages, probably never will, sorry.
Question when i turn it on theres a little red light blinking by the back fan does anyone know the problem or is it me
Where exactly? Post a picture
@@HardwareSense how do i post a pic
@@HardwareSense there i posted
Hi, how easy or hard is this? I bought o en 30L with 16 gigs on BF sales but had assumed I could upgrade to 32 myself easily later. While I actually do have a tech background (computer engineering degree) 15 years ago, I have never built a computer and hadn't touched hardware since school. I think i saw one of your comments on the HP boards where you were warning not to mess with things and could destroy some things?
If it's too difficult I imagine someone will offer this service for a hopefully fairer price than HP. Or is it mostly just folliwing the steps above carefully? Thanks for figuring this out and sharing your solution.
Do you have a job dedicated to your degree? I'm actually interested in computer hardware engineering so I have to ask
@@UnholyTingz as I noted I haven't touched hardware since I got my degree. I went more software route
@@angelachoi2020 so it’s a software engineering degree?
@@UnholyTingz no, it was computers and it was both I studied.
@@angelachoi2020 oh but do you have a job tailored to it ?
i really am having trouble understanding if i can upgrade to 32gb .. i have the 30L with the moria 3 motherboard. i have the 3700x version of the 30l
You can, but if you want to be able to control the RGB or easily enable higher frequencies, the memory has to be purchased from HP. Otherwise, you will have to use Ryzen Master on your own, to enable the XMP profile of the memory.
@@HardwareSense appreciate the response. Mother board replacements are always a option on these pics too right? Just gotta be careful with the size I'm guessing because of case?
@@Michaeljb Oh yes of course, that would be an easy change, just grab the same size board and it's a completely different computer
Hey, HP recently dropped a BIOS update for this OMEN, and one of the fixes is listed as:
"- Adds Non-HP memory OC support page under BIOS setup menu."
Has anyone tried it? Does non hp RAM now work properly at the correct speed?
I will test and report.
@@HardwareSense Thanks. I'm sure there's people who might be interested.
@@HardwareSensedid it work , 1 year later 😂
Why not change the speed manually?
How?
Hey just noticed the buffalo on your hat and was curious if your from buffalo ny as I am as well !
My wife is. Lets go Buffalo!
Hi. Quick question, will changing the motherboard solve this problem? I’m about to order the 25L and I have a feeling I will have the same problem if I want to upgrade my ram.
100%, changing the motherboard essentially is making it a different computer.
@@HardwareSense I’ve seen the motherboard installed and it’s HP8704, do you have any idea if 2080ti is compatible with that one? So sorry, I’m new to this thing and I’ve been trying to find an answer in the last 3hrs. 😞
@@AA-hn6cm As long as there is a PCI express slot on the motherboard, any graphics card can fit.
@@HardwareSense okay got it. Thank you so much 😊
for ryzen cpu users you can change the ram speeds in ryzen master
Like so others can see
its because its an intel, if you had a AMD version you could use 3200 Ram
Not exactly true
I didn’t have a problem upgrading mine it might just be a problem with yours
Yes you do, you just don't know about it, you memory is running at its default clock speeds, check CPU-Z in the memory tab
HardwareSense no it’s running both RAMs
@@fatalmlgpro1154 Huh? What both rams, at what speed? More evidence.
I have the 30L i9-10850k 3070 16gb , if i buy the additional two 8gb sticks to get 32 it won’t work?
It will, but at 2400mhz
@@HardwareSense not sure what this means exactly i’ll try and do research
@@oMacked It means that all memory sticks will clock down to their default speed at 2400mhz
@@oMacked No need for anything above 16gb unless you are a content creator, for games 16gb is plenty, well unless you want to play the Flight simulator