Woodpeckers Just Changed Stop Blocks FOREVER (genius design)

Поділитися
Вставка
  • Опубліковано 18 січ 2025

КОМЕНТАРІ • 148

  • @731Woodworks
    @731Woodworks  2 роки тому +2

    ▼EXPAND FOR LINKS TO THE TOOLS▼
    How to Make a Miter Station - ua-cam.com/video/4jfDk6eYOXU/v-deo.html
    Tools In This Video:
    Stealth Stop (Amazon) amzn.to/3djUyYp
    Stealth Stop (Tool Nut) thetoolnut.sjv.io/WyXWmM
    DFM Small Square - amzn.to/3qC14wC
    CA Glue - amzn.to/3qDAnrB
    Tool Wall I Have - amzn.to/3BinHv0
    Festool Kapex Miter Saw - amzn.to/3qJZWHj
    Other Tools I Like
    Woodpeckers Delve Square - amzn.to/3DcCgD9
    Woodpeckers Stainless Square - bit.ly/3B56NAa
    Jorgensen F-Clamps - amzn.to/3B2Kg73
    Bessey 6-inch F-Clamps - amzn.to/3QDdCP0
    (If you use one of these Amazon and other affiliate links, I may receive a commission)
    Some other useful links:
    -Daily Tool Deals on my website: www.731woodworks.com/tool-deals
    -Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
    -Check out our easy-to-follow woodworking plans: www.731woodworks.com/store
    Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

    • @ramonortega4993
      @ramonortega4993 Рік тому

      🎉🎉I 🎉🎉🎉😢😢🎉🎉🎉🎉😢😢is 😢🎉😂🎉😢

  • @bofa83
    @bofa83 2 роки тому +10

    once I started wood working I really started to appreciate the metric system.

    • @ruidadgmailcanada8508
      @ruidadgmailcanada8508 Рік тому +3

      Spread the word!
      Dealing in fractions is unnecessarily difficult, error prone and slow.
      I gave up fighting it as a woodworker. 😢
      I love math and am very good at it…but dealing in tedious fractions when there’s a better system is just 😖

  • @buddytaylor6983
    @buddytaylor6983 2 роки тому +2

    Shop Nation has some really good stop blocks. Have one and love it.

  • @charlesfinley3791
    @charlesfinley3791 Рік тому +3

    Awesome video. I did laugh that you said it didnt move a mm after complaing that the imperial measurments were on the far side

  • @margueritewhite3038
    @margueritewhite3038 9 днів тому

    I have not liked the Woodpeckers stop block system on the miter gauge but absolutely love it on the miter saw station. I have a small shop and everything is mobile, so I built a mobile miter saw station with folding wings and placed 32" track in the wings flat, as you have done, on both sides. That really is plenty of length as it is 8-10" to the blade so you get 40 or so inches on both sides. I think I spent $125 for 2 pieces of track, 4 stop blocks, the fence attachment brackets and the allen screw driver. That is definitely helpful! I got the fence brackets as I attach just a piece of Aluminum extrusion to it when I'm batching longer boards just to help keep everything square but I can remove it when I don't need it!

  • @csimet
    @csimet 2 роки тому +3

    Those fold-down stop blocks are nice. I use a beefy block that stays put with a large handle and overlaps the tape for easy reference.
    My station has 8' of table on both sides and I build a pair of easy to remove L-shaped 4' fences (3/4" plywood)... mainly so I can use the counter tops for other tasks or chop crooked lumber. They attach with a few 1/4-20 star knobs with just a tad of wiggle room via over sized holes in the fence. Allows me to adjust it slightly and perfectly parallel with the miter saw. A t-track runs the entire length with an imbedded Fastcap tape along its entire length directly in front of the track.
    Tip when making lots of repeat cuts and you worry about the block moving... lock down another block behind it or use that Rockler t-track clamp. Twice the clamp pressure.

  • @jerryhubbard4461
    @jerryhubbard4461 2 роки тому +1

    I built a nice table in my shop for my miter saw. When it comes to the measuring tape, I did not put one down but just my tape on my side always. When I am cutting anything repeated, I have a zero clearance insert and. still use my retract measuring tape to set the stop. Another thing I did was not line of the fence with the saw fence but set it back 1/8 of an inch to allow for lumber that is warped. I take my time and use the aluminum fence on the saw to square it up. JS

  • @jeffreyvanzeijst7932
    @jeffreyvanzeijst7932 3 місяці тому

    Oh wow that's a great DIY build system..wish I had the space for such saw station..

  • @jonathanwhipple5607
    @jonathanwhipple5607 2 роки тому +14

    I have that small teflon stop block and it works fine for me. There is a small lip on the bottom side that is supposed to sit in the t-track slot (not across it like you have it). It needs to be rotated 90° from how you have it situated in order to work properly. This small lip lining up inside the t-track helps secure it better. It's definitely not as high-tech/nice as the stealth stop system, but does OK in my shop.

    • @731Woodworks
      @731Woodworks  2 роки тому +4

      I was continually having issues with it. Maybe I got a dud? Also there's no way to square it up to the measurement to ensure accurate cuts either (which I failed to mention in the video). You could use a square or something, then tighten it down. But when you bump one corner, it's out of square. It just hasn't worked well for me.

    • @jonathanwhipple5607
      @jonathanwhipple5607 2 роки тому +1

      @@731Woodworks You're right, it's far from a perfect solution. I guess part of it is that I rarely use my miter saw for "final" cuts . Usually do those at the table saw, so I don't need the level of accuracy you're talking about. Either way, always appreciate the information you put out! Keep it up.

    • @What_Other_Hobbies
      @What_Other_Hobbies 2 роки тому +1

      I am pretty sure you are right on this topic. I made a similar one with plywood, and it’s been working fine.

    • @garrydye2394
      @garrydye2394 2 роки тому +1

      I have the same one and you are right....turn it as it was intended and works more than perfectly fine. These are almost never final cuts so the original stop is just as good as anything else.

    • @CJICantLie
      @CJICantLie 2 роки тому +1

      I was looking at that at the beginning of the video and thinking "He might be using that wrong".

  • @kevinshea4353
    @kevinshea4353 2 роки тому +5

    I am working on installing the SAME fence system to my new miter station. Thanks for the tip on opening up the stop blocks before installing. I agree that flush mount only is the best approach. I incorporated my drill press into one side as well. I also used a trick of using 4 large bolts to mount the saw portion of the table so I can precisely dial in the saw height with the 2 side tables.

  • @thistledownwoodcraft3426
    @thistledownwoodcraft3426 Рік тому +1

    Love this! I saved $50 by buying 2 tracks, set of stops, wrench and tape instead of the kit.

    • @thistledownwoodcraft3426
      @thistledownwoodcraft3426 Рік тому +1

      They just came. I had never bought from Woodpeckers. Super thick equality track. This was a great find, thanks for the recommend, it is the best miter saw measure I have had yet.

  • @pteddie6965
    @pteddie6965 2 роки тому +6

    This is a good looking system. Woodpeckers is always a little high, but you can be assured that you get a quality product when you order from them. This system is a bit pricey, but probably within reach for the average weekend warrior if he saves his money from recycling combined with money that he gets from Santa or begs his wife for. Thanks for the video.

  • @darrenwilliams324
    @darrenwilliams324 2 роки тому +3

    I like when you wanted the adhesive backed tape measure to read only in imperial but when you bumbed the stop with timber and said it doesn't move at all not even a millimetre haha

  • @lequsejones5384
    @lequsejones5384 2 роки тому +1

    I live in Lagos Nigeria and shopping on amazon is a huge problem because of delivery. As such, I have had to inprovise and design many of the tools I use myself. Now, I came up with a stop block system that works for me and has drastically improved my workflow and efficiency. When I saw this system that you have installed, it got me thinking...and thinking. When I saw how much the woodpecker system cost, it made me jump. I have solved these problems in my workshop and for less than 20 bucks (retail). I think my solution is very marketable but I have no idea how to go about monetising it. I've not shared it with anybody yet, but If you think it may be something that interests you, let's explore.

    • @nickbrutanna9973
      @nickbrutanna9973 2 роки тому +1

      Lequse -- I will suggest to you that almost certainly Woodpeckers has patented what they've done, so, make sure you check with a patent attorney before attempting to sell any similar ideas.
      Personally, I think Woodpeckers does some great stuff but they tend a lot towards gouging for everything, which puts me off using them even though I can afford it. These appear to be injection molded plastic, yet WP wants US$40 for a pair of them. I might see that price if they were aluminum, but not for plastic. For 40 bucks you should get 6, not 2, in plastic.
      Sure, they came up with them, so they get to ask what they want, but I'm not paying that... not for plastic. To each their own. 😉

    • @lequsejones5384
      @lequsejones5384 2 роки тому +1

      @@nickbrutanna9973 Thanks for this response, at least now I'm conversing with someone. So here are my responses to you.
      Firstly, what I have come up with is significantly different from the woodpeckers version. It may solve the same (or some of the same) problems, but that is where the similarities end. It neither looks like nor works like the WP version and I am robustly confident that no intellectual property would be infringened. Secondly, what I'm currently using is an all metal construction and wow, it works spot on. I've just finished a project with 1004 halflap joints and ALL came out perfect. I'm sure there is a gap (pun intended) in the market for this product, just need to figure out how to reach it. Thanks for the comment and if you know someone or something, let's talk!
      Furthermore, my gizmo actually happens to look like it was made by woodpeckers and it would theoretically slot into their range of products quite seamlessly. Like they have different types of squares and rules, this could be just another stopblock system!

  • @TheLovelyMissBeans
    @TheLovelyMissBeans 2 роки тому +2

    Very nice upgrade! I like that just flush in the table without the back fence, and I was actually surprised at the price...it seemed pretty reasonable actually.

  • @jamesfreda1903
    @jamesfreda1903 11 місяців тому

    With the flush mount track,you can make a small backboard for a horizontal frame for long boards. Just like the horizontal fence on your miter saw. I have an overhang on my bench that I use to clamp it wherever I need it.

  • @neilritchey7200
    @neilritchey7200 2 роки тому +2

    I installed this same system, flat like you did, a couple of months ago in my new miter saw station. Absolutely love this track and stop blocks. Very accurate every time I've used them. The fold down of the stop is a real game changer. You can put it down and square one end, put it up and cut to your final length. Very easy and repeatable. As for the clamping side a 1/4" bolt will also work for your hold downs. That's my only complaint is that I wish they would have made it fit with the normal t-track hold downs.

  • @jeffreysmith5018
    @jeffreysmith5018 2 роки тому +1

    I have this same equipment for my miter station. This is about as good as it gets. Well made and gives me my miter station back as a flat surface when I need it. Win + Win.

  • @ronh9384
    @ronh9384 Рік тому

    I like the system from Wood Peckers and it’s the system I will use when I redo my miter station this year. I don’t like the need for a driver either. Hopefully at some point Wood Peckers will design a little flush mount latch that just flips up and down and latches it in place.

  • @Realism91
    @Realism91 Рік тому

    The cabinet shop I used to work for had "Blum ruler swivel stops" on their hinge boring machine it was my favorite, you set common offsets and don't have to ever touch them again because they swing out of the way when you put your material against the front of them or act as a stop when you push against their side. They cost a lot though, I was thinking of machining my own personal ones it's a simple design.

  • @bfflorida2311
    @bfflorida2311 2 роки тому

    Idea was good.. i have one set up at my shop for about two months but saw dust is getting into a track and making inconvenient to move stops in yhe track otherwise it is really nice set up and accurate but jammed sliding stop no so much fun.

  • @davidsaviano9012
    @davidsaviano9012 2 роки тому +1

    Nice video!! but I audibly groaned when you cut the aluminum track with your miter saw blade XD

  • @adamc3474
    @adamc3474 2 роки тому +2

    Great video. Getting to see more woodpecker tools makes me drool. Stay awesome.

  • @zafarsyed6437
    @zafarsyed6437 2 роки тому

    Nice! Looks like I've found the next "Honey, I got you flowers and some earrings" purchase

  • @waterbuddy92
    @waterbuddy92 8 місяців тому

    will a 45 cut piece, for a picture frame for example, hit the stop securely? thx...awesome station!

  • @cindykiefnerthecoppertorch7789
    @cindykiefnerthecoppertorch7789 2 роки тому +1

    You're right not to install that vertical fence, it interferes with your work area and it isn't needed anyway. And hey, your shop is way too clean!😉💕

    • @TheLovelyMissBeans
      @TheLovelyMissBeans 2 роки тому +2

      Matt doesn't have a "Shop" anymore. He has a "Set". 😉😆

  • @vernsteinbrecker3759
    @vernsteinbrecker3759 2 роки тому

    Nice upgrade

  • @jronmanbuilds
    @jronmanbuilds 2 роки тому

    Looks like a nice option. I will have to look into this.

    • @jronmanbuilds
      @jronmanbuilds 9 місяців тому

      I finally got around to looking into this because I am designing a miter saw station. I saw Woodpeckers offers an inch only or a metric only tape in both left or right orientation. It looked like if you buy the kit you can only get the combo left or combo right tape. Maybe if you contacted Woodpeckers you could special order with your preferred tape. I am going to do a full 12 foot on each wing so I may just buy the parts I need instead of going with the kit.

  • @marksjunction69
    @marksjunction69 2 роки тому +1

    Why did you decide the Festool was worth the upgrade. You're watch band matches the Festool dust extraction hose....🤔

  • @billyblackie9417
    @billyblackie9417 2 роки тому

    Very simple and easy job you did on the extension I would have been still there months later trying to figure out what to do. Also the use of washers to raise the saw slightly. Our coppers change in our Euro is being phased out so I keep them to drill holes in centre and use as washers or props in areas they don't matter if noticeable thanks great videos you do good man

  • @williamstant9392
    @williamstant9392 5 місяців тому

    Is it better too have a right to left combination scale or a left too right?

  • @markglabinski3016
    @markglabinski3016 2 роки тому +2

    What a great system!! I love your posts.

  • @jakemillsaps5512
    @jakemillsaps5512 Рік тому +1

    Why did you decide to get rid of the makita and go with the festool?

    • @purdyboi8078
      @purdyboi8078 Рік тому +1

      Right?? That's exactly what I was wondering!

  • @918sadchicano
    @918sadchicano Рік тому +3

    Tip: If anyone plans on flush mounting as shown here you can save a bit of cash by buying the individual parts instead of the kit. I was able to buy 2ea 4’ tracks, the stops and tape for about $50 cheaper…. If you only need one track it’ll be almost $100 cheaper than the kit.

  • @bobmatthews995
    @bobmatthews995 2 роки тому +2

    What if you need cut a miter...Long point will be off the stop block

  • @woodworksbygrampies1284
    @woodworksbygrampies1284 2 роки тому

    Hola! 🖐Thanks for presenting another option for a miter station. I'm getting closer to building my shop and I'm "taking notes" as to what my set up will be, this video gives me more info to ponder before making a decision/commitment. Good video, thank you for that. Take care and have a good one, Adios! 👊

  • @paulr7719
    @paulr7719 4 місяці тому

    Where can I get those T bolts that fit that track? I couldn't find anything at the hardware store. You mention that a standard T bolt will fit but every search I do just brings up the regular T track bolts.

  • @toootankhamooon
    @toootankhamooon 2 роки тому

    9:18 , a ghost stole the offcut tape measure 😱👻

  • @migratorygame7400
    @migratorygame7400 2 роки тому +1

    Does the end grain need to alternate direction when you build a table top? I glue and use pocket hole screws.

    • @robertgeorgemiller278
      @robertgeorgemiller278 2 роки тому +1

      Some say not required. But it is conventional wisdom to alternate the grain. A lot depends on the type of wood and size of your table top. For me, most important, don't join lengths more than 10cm wide (4") and always match the finish on BOTH sides of the table top.

    • @migratorygame7400
      @migratorygame7400 2 роки тому

      @@robertgeorgemiller278 thanks!

  • @bradloch9397
    @bradloch9397 9 місяців тому

    What is the company name that supplies this system?

  • @pi3ladbd417
    @pi3ladbd417 Рік тому

    Were did you get your tool storage on you back wall from ,and great video I'm goin to do the same

    • @731Woodworks
      @731Woodworks  Рік тому

      Video on the tool wall here ua-cam.com/video/hVWSGLYduvw/v-deo.htmlsi=TaJXclie6aHV6u1N

  • @ronswoodshack
    @ronswoodshack 2 роки тому +1

    Really cool setup Mighty Matt. Thank you for the content.

  • @justseefitness
    @justseefitness Рік тому

    What table saw do you have there?

  • @chrisl7621
    @chrisl7621 2 роки тому +2

    It looks like you have the white stop block 90 degrees off. You can see the guide that is supposed to go into the track laying perpendicular on top of the track. That could be why it wouldn’t lock down. I have a similar one and it doesn’t move at all once it’s locked.

    • @731Woodworks
      @731Woodworks  2 роки тому

      Even turned the correct way it moved

  • @intrepidus3378
    @intrepidus3378 2 роки тому

    will the stops fit into a standard miter track?

  • @peterlindsay3099
    @peterlindsay3099 2 роки тому

    well done!

  • @Madhava-das
    @Madhava-das 2 дні тому

    Is that "hardboard" just MDF or is it another specialty product? I am in the process of adding a stealthstop system to my station and liked your approach of building up rather than routing down.

    • @731Woodworks
      @731Woodworks  2 дні тому +1

      Not 100% sure what it's made of. But it is different than standard MDF somehow.

  • @wannabefunnyman
    @wannabefunnyman 2 роки тому +1

    I kept my stock blade on my mitre saw for cutting aluminum.

  • @russmartin4189
    @russmartin4189 2 роки тому +3

    In a situation like this, wood glue will wet the fiberboard and cause it to expand. A better choice would have been contact cement, which is traditionally used for countertops. It will not cause it to expand or bump up.

  • @joeclark9042
    @joeclark9042 2 роки тому

    Hey bro you got a wooden hammer on hanging on your wall Where'd you get that at what kind is it can you help me out I like to get me one please thank you sir and everything looks good keep up the good work

    • @731Woodworks
      @731Woodworks  2 роки тому +1

      One of my viewers sent that to me as a gift

  • @LYTOMIZE_Woodshop
    @LYTOMIZE_Woodshop 2 роки тому +1

    You are terrible, Matt! I haven't built my miter station yet and now I want this system too! On another note... holy crow - GREAT SAVE!!

  • @MarkL71
    @MarkL71 Рік тому

    I bought those too and hoped someone would soon copy it in alu or steel. Variations on woodpeckers stuff soon gets copied by China 😂. But nope, nobody copied them, still those plastic tabs. Surprised because they're a really good invention.

  • @tedalmeida
    @tedalmeida 2 роки тому +1

    Praying for you and your family that God would prosper you even as your soul prospers.

  • @je-fq7ve
    @je-fq7ve Рік тому

    clamp a piece of wood on both sides of the blade and make a cut. now you can hook a tape to either side and get a perfect alignment for the adhesive tape.

  • @no-page
    @no-page 2 роки тому +8

    You were using the old stop blocks wrong. You should have rotated them 90° so that the block's tenon fit in the track groove. The way you set it up, only a tiny portion of the block bears on the track and it was not enough to keep it from slipping.

  • @Daviddear30
    @Daviddear30 2 роки тому +1

    Idea for you. Route a custom small tray inset in the top for an Allen key that fits the sliders 💪. Maybe even a small magnet in the bottom to keep it there

  • @RayGreen94510
    @RayGreen94510 Місяць тому

    11/2024 I just ordered and received mine, and each of the four stops fit too tight into the grooves in that they do not easily slide or adjust as shown in the video. The fine-tune adjustment screws do not turn at all because they are too tight.

  • @cliffkelly7613
    @cliffkelly7613 2 роки тому

    Did anyone else catch the complaint about metric measurements at 10:05, followed by the comment "doesn't budge, not even a millimeter" at 11:16. haha. Classic.

  • @ryanm2214
    @ryanm2214 2 роки тому +1

    As soon as companies like that give a reasonable price, im in.

  • @saprious5273
    @saprious5273 2 роки тому

    Love the video, great content like always!

  • @aaronmassuda679
    @aaronmassuda679 2 роки тому

    How do you plan on cutting anything less than 14 inches. The stop block will not work. Bourbon Moth has the same setup and came up with a system of using math and a known length piece of wood but that seems like a huge design flaw for a an expensive product that boasts as having everything thought out.

    • @731Woodworks
      @731Woodworks  2 роки тому

      I cut a 14” block to keep at the station.

  • @hotroddin6488
    @hotroddin6488 2 роки тому

    Just wondering if you would have an issue with drilling through the top of the aluminum. If you don't have an issue with it you could drill them and then put a screw or bolt through that to mount the pieces down better. You could just do this on either end and it shouldn't move.

  • @Hko8
    @Hko8 Рік тому

    The only good thing about this system is that you can set 2 sizes that are near each other. I use kreg, and the only bad thing about it is that you have about 8-9 cm between 2 stops. So you cant set for example 70 and 72 cm, the nearest possible to 70 is 78. But if we talk about this one - you have to use 2 different tool to set it. I think its very uncomfortable to use.

  • @grantcreveling1965
    @grantcreveling1965 2 роки тому

    I love the comment at 7:42 about a less lazy guy would rebuild it. If you wanted to build it differently where the track is going the "wrong way" and adjust it accordingly to your saw, it would put the inches side of the tape on the closer side to the block.. Be nice if the whole part of the block was aluminum. If you wanted 2 blocks closer than the 2" or so that each takes, you could run a secondary track in front of the first one potentially.

  • @arsenicjones9125
    @arsenicjones9125 2 роки тому

    Just use a countersunk bolt to mount the bar down to the table. Too late now but it wouldn’t have been a big deal

  • @fatpat01
    @fatpat01 2 роки тому +1

    Sorry but you should have watched Bourbon Moth video about is fence installation, much easier to adjust and precise, with supertracks and flip stops!!

    • @731Woodworks
      @731Woodworks  2 роки тому

      I preferred this option, which is why I bought it.

  • @willfishing5605
    @willfishing5605 2 роки тому +1

    I love how the ONE time you actually hit the new one like you were hitting the homemade one IT MOVED! LOL! FAIL! 11:20

    • @731Woodworks
      @731Woodworks  2 роки тому

      LOL no. I hit it nearly 20 times just like I did the other one. It didn't budge until I really hit it with a lot of force. Any stop block is going to move with enough force.

    • @TheBamaDoc
      @TheBamaDoc Місяць тому +1

      Saw it move
      Fail

  • @moovintruespace
    @moovintruespace Рік тому

    Why did you butcher the tape. What did it do to you 😨

  • @jamiehill9578
    @jamiehill9578 2 місяці тому

    Nice system,, don't like how u gotta use a wrence to tighten down the stop,, too bad it wasn't some kind of clamp system every time u make a different measuments

    • @731Woodworks
      @731Woodworks  2 місяці тому

      Agreed, and I thought it would annoy me but it hasn't been an issue.

  • @Z-add
    @Z-add Рік тому

    Anyone knows of chinesium version of stealthstop.

  • @wittworks
    @wittworks 2 роки тому +3

    First. 🙃

    • @mariondorsett
      @mariondorsett 2 роки тому +2

      Damon will be sad.

    • @codacreator6162
      @codacreator6162 2 роки тому +1

      I got stuck behind an ad. It was a good ad. 😎

    • @731Woodworks
      @731Woodworks  2 роки тому

      😂

    • @traceoeight7549
      @traceoeight7549 2 роки тому

      (Comment for your channel overall) Thanks for the videos and your shirts. I try not to miss a video and browse your channel often. I have one request, give us a one second shot of your shirt at the end. I like to look them up.

    • @wittworks
      @wittworks 2 роки тому

      I may have cheated.

  • @eddiegiovanniello4346
    @eddiegiovanniello4346 2 роки тому

    your awesome dude!!!

  • @grumpywiseguy5992
    @grumpywiseguy5992 2 роки тому +1

    This Merican uses metric more than imperial these days. I grew up on metric motorcycles so for smaller stuff especially lathe work, I prefer metric.

    • @731Woodworks
      @731Woodworks  2 роки тому

      I actually think metric would be much easier to use in woodworking. Just never switched over.

    • @mikesebphoto
      @mikesebphoto Рік тому

      Been starting to do the same thing myself. Just much easier to do calculations with decimals rather than fractions. Once you just surrender to the Metric System, rather than constantly converting back and forth in your head, it gets much easier.

  • @Daniel-li1jt
    @Daniel-li1jt 2 роки тому

    When did this channel go from a wood working channel to a tool review channel?

    • @731Woodworks
      @731Woodworks  2 роки тому

      Fun fact, 6 out of the first 10 videos I ever published on this channel were.....wait for it..... Tool Reviews. It's always been a part of the channel. 🤔 🤯

  • @FieldingAustin12B
    @FieldingAustin12B 2 роки тому

    What’s the difference between the right and Left versions?

    • @731Woodworks
      @731Woodworks  2 роки тому +1

      Just the tape that comes with it. Right to Left tape or Left to Right Tape

  • @leyderness3553
    @leyderness3553 2 роки тому +2

    Can send you a hacksaw 😉?

  • @gregmize01
    @gregmize01 Рік тому

    #WORSHERS
    Elegant solution using the MDF

  • @FormBuildDesign
    @FormBuildDesign 2 роки тому

    Having to use a seperate tool to tighten the set screw seems like a time consuming and annoying idea to me.

    • @731Woodworks
      @731Woodworks  2 роки тому

      I originally thought the same thing but, you really only set it once or twice per job. So it's not a big deal really. Works well. Would it be better if you didn't have to have the extra tool, of course. But so far, it hasn't bothered me to set it and go to work.

  • @johndunn3615
    @johndunn3615 10 місяців тому

    Rather than all the CA glue and activator , why not use Super glue and then sprinkle some baking Soda. Try it and be surprised.

  • @taylormcintyre5759
    @taylormcintyre5759 2 роки тому

    How would you know it doesn’t move a millimeter without the metric scale?! 😆

  • @Philly_4_for_4
    @Philly_4_for_4 Рік тому

    Complained about metric system on tape then later says stop block didn't even move a millimeter. lol

  • @shaynesabala
    @shaynesabala 2 роки тому

    Matt i love you like a fat kid loves chocolate, but that system could be built for 25% of what woodpecker wants for it. Thank you for showing another option to a fence. I'm sold,.

    • @731Woodworks
      @731Woodworks  2 роки тому

      It is pricey just beaucse it is Woodpeckers. I got it on sale. But even then it costs a premium. I like the system and have been putting it to work this past week and like it even more now that I am using it regularly. Yeah, you could make something similar but convince of having it all ready to install with all the parts/pieces you need also has value.

  • @mmgross144
    @mmgross144 2 роки тому +1

    Super Slick UHMWPE plastic is not good to use as a stop-block. No friction, no surface holding power.

  • @hernandotatis1302
    @hernandotatis1302 Рік тому

    what youre after is , you want viewers to think makita products are no the best
    while the truth is Makita power tools are closes to perfect accuracy in measuring functioning parts

  • @aaudain1
    @aaudain1 2 роки тому

    💯🆒💡👍😎

  • @DennisMathias
    @DennisMathias 2 роки тому +1

    It's too bad they could not have come up with something tool-less.

  • @aj565
    @aj565 Рік тому

    Here I am using a cinder block lol

  • @HarrySatchelWhatsThatSmell
    @HarrySatchelWhatsThatSmell 9 місяців тому

    OR... you could use a piece of scrap and a clamp.

  • @vmoutsop
    @vmoutsop 2 роки тому +1

    Ha ha ha ha ha ha, you've got to be kidding me, have you seen the price of this solution? I almost fell off my chair, never going to happen my friend!

  • @RossWilliamsDC
    @RossWilliamsDC 7 місяців тому

    Right! Let's spend $237 for a WoodPecker system with plastic stops when all you really needed was a little bigger knob for more leverage to tighten down the stop you had, or a block of wood.

  • @NewGenerationProject
    @NewGenerationProject 2 роки тому +1

    You all got nothing better to do with money?!?

    • @731Woodworks
      @731Woodworks  2 роки тому

      I was unaware it was any of your business what I do with my money.

  • @jeremys5904
    @jeremys5904 2 роки тому

    This is the dumbest fence stop system i have ever seen. Woodpeckers worst product right here.

    • @731Woodworks
      @731Woodworks  2 роки тому

      Do you have it? Used it? If not, you don't have any real opinion on it other than you don't like the looks of it.

    • @jeremys5904
      @jeremys5904 2 роки тому

      @@731Woodworks Hell no i dont have this but I absolutely do have a professional opinion on it. If you care about your time this is not the stop for you. Think FLIP stop! NOT with MY finger!

  • @Cvoge1972
    @Cvoge1972 2 роки тому

    When I clicked on the Amazon link, it took me to a $250 package. I definitely cringed. But, after you mentioned the price, I hit the Woodpeckers link and saw the options. $129 is not a bad price for something that you will use over and over again.

  • @handytbutler7380
    @handytbutler7380 2 роки тому

    Little pricey for a track and not a fan of having to use an allen wrench to tighten it down every time... I am sure it works nicely for others, just not my cup of tea....