I'm 70 and a former racer. Forget what he's said. First, don't get a tuner program. 305 horspower and the V6 at over 4,000 rpm in any gear is enough to get you a fat ticket. Second, do these mods: Bilstein HD shocks/struts; 5.0 strut tower brace; Shelby rear shock tower brace--cost for all, about $1,300. The car will handle and give you a good ride. I added the best all season tires, turn off the traction control, and enjoy driving my Mustang on long, 4 hour runs.
Thank you sir! My goal is to get a 2011-2014 V6 Mustang and make it handle better! I don't want more power from that engine but do want my Mustang handle well enough for road trip. My goal is to make it super reliable so your tips was very helpful. This videos is also helpful to make the car sounds nicer tho. Big power are for Coyotes and Shelby's engines.
I kinda agree to you... 1. Suspension/ Chassis - Coilovers, beefier Panhard, Upper and Lower Control arms, sway bars, Stop the Hop from Steeda is an alternate choice, BMR KMember is a good choice. 2. Gears/ Clutch/ Driveshaft - 410 gears, stronger twin disc clutch and flywheel, one piece driveshaft 3. Wheels/ Tires/ Breaks - I like 285/40/18 front and 305/40/18 with fully forged wheels and 6 piston front and 4 piston rear big breaks, avoid discs with holes, they tend to crack on track use, stick with slotted ones 4. Intake/ Exhaust - Bigger intake, bigger Throttlebody with spacer, Long tube headers, highflow cats, Axlbacks 5. Aero - adjustable front splitters, functional wing, sideskirts, rear side splitters, I like GT500 rear valance with diffusers, inlet and heat extractor hood 6. Appearance - Racing stripes, Switchback halos and DRL board upgrade for headlamps, Amber halos for grille mounted fig lights, fake gas cap delete with plain decklid, quad tip exhausts, license plate lights LED swap
@@markclark8444 it's only rated for that speed. If you increase power/ flash it to remove the speed limiter, you'll wanna upgrade it before you get too wild
@@ajhill5094 mine only has a cold air intake tube and Axle back and I’m good going 135 but that’s what I set my limit too, idk about any higher than that
I'd do suspension and control arms first because what good is all that power if you can't grip the road properly? You could spin out and wreck if you don't upgrade the handling, which has been an issue for new Mustang owners
For what it;s worth.. I had a 428CJ tricked up, and now have a V6 which is (after Tuned Header, K&N replacement, Airaid, and tune) more fun to drive on the twisty mountain roads and just generally at way less fuel burn, Custom tune makes it so.. Next .410 Driveshaft, Wattslink springs, and call it done. Pushing 72 years old. Pretty cool out so was cruising internet stumbled across this. Good luck with your efforts and in the end what you will have is what you made it to be. Thus the reward is yours. I have felt this way about quite a few things in life!
Allan Radcliffe That's so awesome that you're having fun and modding your car. Thank you so much for watching the video! We'll see where this journey takes me, we'll make it great!
@@camahavids2008 Yeah 4sure! And it makes an old dude feel good to see the younger ones (like you) with so much energy and fire inside. I feel there are only certain people who have this kind of fire, Mr. C. Santana is another fine example! I have been able to get 94 octane and expensive, but go like gone.
Better drive-ability mods offered for a manual trans 2011 Mustang by a 70 year who has learned his lessons the hard way. 1. Bilstein HD shocks and struts 2. Strut tower brace (Ford GT) and rear shock brace (Shelby American) [Bilsteins and braces greatly improve handling while improving ride comfort--all you need--and much cheaper than handling packages with lowering springs, coil-overs, & etc]. 2. Barton 2 post bracket for manual shifter (so you can hit 3rd gear) 3. Cue ball shift knob (so you can shift into reverse easily) 4. K & N air filter for better breathing and mpg (aftermarket cold air boxes aren't better than what Ford provides). Forget $800 aftermarket exhaust systems, which provide too much droning noise on long drives and make music listening difficult. Tuner mods do nothing. The V6 cams don't change to radical until you hit 4200 rpm, which is when tuner mods make a difference. How often do you hit 4200 rpm?
I have a 2014 Mustang v6 can anyone help me out with a question about final drive gear ratio.. the vehicle is a automatic.. currently has a 2.73 final drive ratio and hits 0-60MPH in 5.9 seconds or so which is plenty fast but for everyday city driving I feel like I have to be heavy on the throttle to get the power down I was wondering if having the dealership install 3.55 gears with the automatic would make a major difference from the 2.73 ? if not its not worth the money but if it changes the drive ability in city stop and go it would be worth it to me.. anyone know? I know in manuals the gears affect it more somehow but its the automatic that is my concern if it will be a noticeable difference
Lolz I have heard that gears make the biggest difference out of any other mods that people do. 3.55 is a great choice for better acceleration while still being practical
I started with 1 performance exhaust 2 gt500 front conversion with hoodvent 3 AM wheels the need for speed 19 4 black paint and matte black stripes 5 spoiler and diffuser 6 not done yet but in the future procharger or super
Overall I do believe that a cat back is a better option, maybe even welding in the GT diameter exhaust. I just like my Magnaflow axleback because I got it used for a really price.
2012 V6 manual owner here. My mods in order 1. 3.73 gear 2.BBK 73mm throttle body + CAI 3.Shorty headers 4. lowering springs 5. Oil catch can 6. CAT/Muffler delete 7. tune I believe i’m around 350hp with this current setup. Very fun car
Danny D You can definitely hear it when the windows are closed. However, the drone at highway speeds is not bad at all. I drive long distances no problem. I've heard that drone is pretty bad if you go catless, but I'm sure that could be remedied by some nice resonators.
Billy McCrary I do agree with you, 3.73 or 4.1 gears are a must for our cars, but I was going for the more easy install bolt on mods for this video. Gears would be next for sure!
Blake Doughty I definitely agree with you, for anyone who spends a lot of time at race speeds or is trying to push a lot of power a driveshaft upgrade is crucial. However, for the average daily driver who wants to do things that will make a huge difference to the way their car looks and feels, they probably won't need a driveshaft.
thinh tran Ngl I forgot about the one piece drive shaft, that's a great idea if you're racing, whether in US or Mexico😉 With your exhaust setup I bet it sounds awesome!
the drive shaft is just for a peace of mind lol I don't want to take any chances of the factory drive shaft blows up under me. Also the exhaust does sounds good! Even if you just get the pypes pipe bombs axle back it still sounds like a beast. If your car is bone stock and you only have the pypes pipe bombs on it will back fire like hell :D Music to my ears haha
i have a serious question. why is it that every car video has the same shitty EDM music at the beginning? why? does nobody who likes cars actually enjoy good music? shit.
Whats Wrong I definitely agree with the MPT tune, they are the best with 3.7s for sure. I was going for the easy bolt ons in this video, but gears would easily be #2 if you want to put in the effort👍🏻
MrBspace I had a full bolt on 3.7 before I traded it in... best performance mods were the tune and gears... I don’t think headers are worth it unless they’re long tubes... I had shorties too
1. Tune 2 . Ported Intakes 3. Headers and Midpipe 4. Gears 5. Suspension & chassis ( LCA's , UCA, Shocks, panhard, antiroll bars, k frame, springs etc)
I think he was just going for beginners
"The first one you should get is the tuner. Now, I haven't gotten mine yet, but I wish I did. I don't know the technicals, but... "
...and I'm done.
Stellicopter I do wish I got the tuner first, and I'm not a processional engine tuner.... soo sounds about right yep
Camden P so do what the majority does....MPT email and datalog
I'm 70 and a former racer. Forget what he's said. First, don't get a tuner program. 305 horspower and the V6 at over 4,000 rpm in any gear is enough to get you a fat ticket. Second, do these mods: Bilstein HD shocks/struts; 5.0 strut tower brace; Shelby rear shock tower brace--cost for all, about $1,300. The car will handle and give you a good ride. I added the best all season tires, turn off the traction control, and enjoy driving my Mustang on long, 4 hour runs.
Aardvark1 70 years old and knows how to use modern technology my hats off two you
Thank you sir! My goal is to get a 2011-2014 V6 Mustang and make it handle better! I don't want more power from that engine but do want my Mustang handle well enough for road trip. My goal is to make it super reliable so your tips was very helpful. This videos is also helpful to make the car sounds nicer tho. Big power are for Coyotes and Shelby's engines.
@@nguyenanhphuc96 I have the v6 2012 Mayhem pkg with performance upgrades. I love how it drives.
Start from the ground up. 1 New wheels. 2 suspension. 3 Tune. 4 One piece drive shaft. 5 gears. 6 exhaust system.
stock wheels+lowered suspension>New wheels+Stock suspension. get it lowered first
I kinda agree to you...
1. Suspension/ Chassis - Coilovers, beefier Panhard, Upper and Lower Control arms, sway bars, Stop the Hop from Steeda is an alternate choice, BMR KMember is a good choice.
2. Gears/ Clutch/ Driveshaft - 410 gears, stronger twin disc clutch and flywheel, one piece driveshaft
3. Wheels/ Tires/ Breaks - I like 285/40/18 front and 305/40/18 with fully forged wheels and 6 piston front and 4 piston rear big breaks, avoid discs with holes, they tend to crack on track use, stick with slotted ones
4. Intake/ Exhaust - Bigger intake, bigger Throttlebody with spacer, Long tube headers, highflow cats, Axlbacks
5. Aero - adjustable front splitters, functional wing, sideskirts, rear side splitters, I like GT500 rear valance with diffusers, inlet and heat extractor hood
6. Appearance - Racing stripes, Switchback halos and DRL board upgrade for headlamps, Amber halos for grille mounted fig lights, fake gas cap delete with plain decklid, quad tip exhausts, license plate lights LED swap
What about a driveshaft that can handle more than 115 mph?
Dude.. Seriously that driveshaft is fucking weak
What happens past 115 im looking to buy the car
@@markclark8444 it's only rated for that speed. If you increase power/ flash it to remove the speed limiter, you'll wanna upgrade it before you get too wild
@@ajhill5094 mine only has a cold air intake tube and Axle back and I’m good going 135 but that’s what I set my limit too, idk about any higher than that
🤘🏿V6 gang🤘🏿
Or don't bang
@@jessedabstersmunoz stfu
Dead ass a cammed v6 sounds super unique !
I'd do suspension and control arms first because what good is all that power if you can't grip the road properly? You could spin out and wreck if you don't upgrade the handling, which has been an issue for new Mustang owners
Great video too !
For what it;s worth.. I had a 428CJ tricked up, and now have a V6 which is (after Tuned Header, K&N replacement, Airaid, and tune) more fun to drive on the twisty mountain roads and just generally at way less fuel burn, Custom tune makes it so.. Next .410 Driveshaft, Wattslink springs, and call it done. Pushing 72 years old. Pretty cool out so was cruising internet stumbled across this. Good luck with your efforts and in the end what you will have is what you made it to be. Thus the reward is yours. I have felt this way about quite a few things in life!
Allan Radcliffe That's so awesome that you're having fun and modding your car. Thank you so much for watching the video! We'll see where this journey takes me, we'll make it great!
@@camahavids2008 Yeah 4sure! And it makes an old dude feel good to see the younger ones (like you) with so much energy and fire inside. I feel there are only certain people who have this kind of fire, Mr. C. Santana is another fine example! I have been able to get 94 octane and expensive, but go like gone.
Allan Radcliffe Thank you so much for the compliment it seriously means so much!!
Better drive-ability mods offered for a manual trans 2011 Mustang by a 70 year who has learned his lessons the hard way. 1. Bilstein HD shocks and struts 2. Strut tower brace (Ford GT) and rear shock brace (Shelby American) [Bilsteins and braces greatly improve handling while improving ride comfort--all you need--and much cheaper than handling packages with lowering springs, coil-overs, & etc]. 2. Barton 2 post bracket for manual shifter (so you can hit 3rd gear) 3. Cue ball shift knob (so you can shift into reverse easily) 4. K & N air filter for better breathing and mpg (aftermarket cold air boxes aren't better than what Ford provides). Forget $800 aftermarket exhaust systems, which provide too much droning noise on long drives and make music listening difficult. Tuner mods do nothing. The V6 cams don't change to radical until you hit 4200 rpm, which is when tuner mods make a difference. How often do you hit 4200 rpm?
wher did u get the 3.7 cyclone decal on the hood
I have a 2014 Mustang v6 can anyone help me out with a question about final drive gear ratio.. the vehicle is a automatic.. currently has a 2.73 final drive ratio and hits 0-60MPH in 5.9 seconds or so which is plenty fast but for everyday city driving I feel like I have to be heavy on the throttle to get the power down I was wondering if having the dealership install 3.55 gears with the automatic would make a major difference from the 2.73 ? if not its not worth the money but if it changes the drive ability in city stop and go it would be worth it to me.. anyone know? I know in manuals the gears affect it more somehow but its the automatic that is my concern if it will be a noticeable difference
Lolz I have heard that gears make the biggest difference out of any other mods that people do. 3.55 is a great choice for better acceleration while still being practical
3.73 gears are better
Thanks man this video help out alot
I started with
1 performance exhaust
2 gt500 front conversion with hoodvent
3 AM wheels the need for speed 19
4 black paint and matte black stripes
5 spoiler and diffuser
6 not done yet but in the future procharger or super
tK_NiTe did you ever procharge or super charge it?
Don't get axle back if you have a 3.7! Save up for a catback setup. Better sound and performance for the 3.7.
Overall I do believe that a cat back is a better option, maybe even welding in the GT diameter exhaust. I just like my Magnaflow axleback because I got it used for a really price.
@@camahavids2008 is that a Magnaflow axleback you have in this video right?
I always did the tune last.
I have 2.73s but I do have a cai, tune, xpipe, and axel backs, is it safe to be "ballsy" about who I'm racing lol
Where did you get the hood decal that says cyclone?
Mosome Gaming I made a custom sticker on carstickers.com
Camaha Vids awesome, thanks bro!
Nive vid brother
Thanks man!!👍🏻
Thats a good video
We're almost to 1000 views! Keep it up! Like the video! And hit that subscribe button!👊🏻
Supercharger is bolt on? And How you gonna tell people to buy a tuner if you don’t even know what it does yourself.
Same exhaust I have
Spend the extra money and get a catback, way better sounding and deeper than an axleback setup.
ayyyyyy
Killing the game!!! ❤️
Claire Scribner hi and i subscribed
Ricers be like huh?
1. Fart Can LED 2. Racing Stripes 3.Bags 4. Big wing and splitters Bro and 5. Halo
2012 V6 manual owner here.
My mods in order
1. 3.73 gear
2.BBK 73mm throttle body + CAI
3.Shorty headers
4. lowering springs
5. Oil catch can
6. CAT/Muffler delete
7. tune
I believe i’m around 350hp with this current setup. Very fun car
Did you straight pipe your car bro ?
Nope, all it has is Magnaflow Race Series Axle Backs. Everything else is stock.
How much did that cost you brotha?
Danny D ~$220 shipped off of the Cyclone Mustang Facebook page
Is it super loud on the inside ? I’m thinking of straight piping my car!
Danny D You can definitely hear it when the windows are closed. However, the drone at highway speeds is not bad at all. I drive long distances no problem. I've heard that drone is pretty bad if you go catless, but I'm sure that could be remedied by some nice resonators.
Cat back exhaust is better, domt have to worry about cutting and welding
Cough cough.... 3.73 gears 👌🏽
Billy McCrary I do agree with you, 3.73 or 4.1 gears are a must for our cars, but I was going for the more easy install bolt on mods for this video. Gears would be next for sure!
Camden P haha ya I just order my 3.73's... I was just playing good video 👍🏽
Billy McCrary That's awesome! Thanks ahaha👍🏻
Honestly first should be a driveshaft. The stock driveshaft can't handle power
Blake Doughty I definitely agree with you, for anyone who spends a lot of time at race speeds or is trying to push a lot of power a driveshaft upgrade is crucial. However, for the average daily driver who wants to do things that will make a huge difference to the way their car looks and feels, they probably won't need a driveshaft.
Coilovers are not a better ride quality. Especially if your talking about daily driving
Nobody said CAI
Let me borrow your ride
Drone for days.... What kind of exhaust do you have so I never buy it!
a supercharger is a bolton mod
This is what happens when mommy and daddy get Tanner his first " muscle car" 🙄
👍🏽
I started with this order
1.CAI
2.throttle boddy + spacer
3.1 pc driveshafe
4.xpipe
5.shorty headers
6.muffler
7.SCT tuner
8.18 inch glasspacks
thinh tran Ngl I forgot about the one piece drive shaft, that's a great idea if you're racing, whether in US or Mexico😉 With your exhaust setup I bet it sounds awesome!
the drive shaft is just for a peace of mind lol I don't want to take any chances of the factory drive shaft blows up under me. Also the exhaust does sounds good! Even if you just get the pypes pipe bombs axle back it still sounds like a beast. If your car is bone stock and you only have the pypes pipe bombs on it will back fire like hell :D Music to my ears haha
thinh tran I know what you mean, I love my Magnaflow Race Series Mufflers!
how the spacer helps ???
jose raul Martinez Most people will tell you that throttle body spacers do absolutely nothing performance wise
Thank You Everyone for 420 Views!!! ;)
Camden P Are you from Roswell, Georgia?
i have a serious question. why is it that every car video has the same shitty EDM music at the beginning? why? does nobody who likes cars actually enjoy good music? shit.
Jay Ochs I'd say it's in every car video and vlogs in general just because it's the most abundant non-copyright music available
To me, all the music you hear today sounds like the music they play in stripper clubs.
Just found this turd in the junk yard crashed 😂
Mod 1: Coyote Swap
Silver Stang Honestly though😂😂you're not wrong😂i kinda alluded to that in this video ua-cam.com/video/M661-FuM3pE/v-deo.html
😂😂😂 best Bolt on mod
#1 Tune......MPT
#2 gears
0:
Whats Wrong I definitely agree with the MPT tune, they are the best with 3.7s for sure. I was going for the easy bolt ons in this video, but gears would easily be #2 if you want to put in the effort👍🏻
#1 BBK shorty Headers
#2 Roush axle back system
#3 91 Performance Mpt tune
That was my order when I had my 2014 V6.
MrBspace I had a full bolt on 3.7 before I traded it in... best performance mods were the tune and gears... I don’t think headers are worth it unless they’re long tubes... I had shorties too
Whats Wrong long tubes does more hp, but the shorty headers were purely to make the roush axle backs sound deeper for me.