I have a 2018 just like your G3 115/80 and honestly I've been in 5 inches of water and my fishing buddy was with me. What happened is we were fishing at the edge of 5' of water and the engine clogged with moss and we couldn't get the anchor in the river before it floated through a stretch of water that was no more than 5 inches and we had no choice but to go back the same way and my buddy was holding his breath he said oh you gonna drag and I was all to pieces because I don't take chances anymore. I opened it half way in a second and off we went. I can't afford to tear it up. I had a 17' crestliner 2016 with 50 HP jet but it just didn't suit me because you set in the floor an couldn't get up because my legs are worn out so I traded it for my G3 and I love it. I haven't used it 20 times and the crestliner was a 1000 lbs heavier although I did pick it up and put it on the truck hitch. Tongue must have weighed 350 but at 65 years old and 6'5" a has been football player I also was getting too old to go out an lift it. Just wasn't a river boat had it been a prop driven would have been a good lake boat and it worked great on lake. Sorry to talk so much but I'm 71 now and all my family is gone I talk to JESUS so much I have to give him a break. Thanks an be safe on the water people have lost their minds.
Yamaha boat and a yamaha motor only way to go!! That 115/80 jet is definitely the minimum if your gonna run fast water. 90/60 is okay if you don't mind more dents in bottom. 60/40 save your money until you can get a 115/80.
What size motor and boat what mph are you getting do you have any pictures or videos of motor hight how high is intake from bottom of boat Really liked video nice rigs
howdy..how much space would you say there is between the front of the foot and the top of the tunnel?i just bought a new crestliner 1870 with a 80 jet and i think they mointed the engine to low.its about 1.5 from the foot to the top of the tunnel.there is 1 mounting hole left to go up.
Was a blast! Need to go again.
Y’all look like you’re just having the time of your life!
I have a 2018 just like your G3 115/80 and honestly I've been in 5 inches of water and my fishing buddy was with me. What happened is we were fishing at the edge of 5' of water and the engine clogged with moss and we couldn't get the anchor in the river before it floated through a stretch of water that was no more than 5 inches and we had no choice but to go back the same way and my buddy was holding his breath he said oh you gonna drag and I was all to pieces because I don't take chances anymore. I opened it half way in a second and off we went. I can't afford to tear it up. I had a 17' crestliner 2016 with 50 HP jet but it just didn't suit me because you set in the floor an couldn't get up because my legs are worn out so I traded it for my G3 and I love it. I haven't used it 20 times and the crestliner was a 1000 lbs heavier although I did pick it up and put it on the truck hitch. Tongue must have weighed 350 but at 65 years old and 6'5" a has been football player I also was getting too old to go out an lift it. Just wasn't a river boat had it been a prop driven would have been a good lake boat and it worked great on lake. Sorry to talk so much but I'm 71 now and all my family is gone I talk to JESUS so much I have to give him a break. Thanks an be safe on the water people have lost their minds.
Great Video! Both Great Boats, I’m particularly fond of LOWE tho! ;)
You guys need a poly foot for that jet pump.
What's a poly foot, I just bought this exact g3
Go G3 👍🏽.
Hey I also live in Ohio and have a jet boat. Where did you guys launch at?
Private bank, I don’t know of any public ramps
legendary, can't wait till this goes viral!!
Yamaha boat and a yamaha motor only way to go!! That 115/80 jet is definitely the minimum if your gonna run fast water. 90/60 is okay if you don't mind more dents in bottom. 60/40 save your money until you can get a 115/80.
I have a 115/80 and my buddy has a 95/60 G3. His shit is banged to hell.
90/60
Not fooreda shalow draft big after cabinet io v drives share sanc er bear zero jet drive reawied
What was the shallowest water you think you ran in this video? On either boat did you have to make any modifications to the hulls?
The shallowest part was probably 6 inches,both boats have a tunnel hull feeding the jet drive.
What size motor and boat what mph are you getting do you have any pictures or videos of motor hight how high is intake from bottom of boat
Really liked video nice rigs
Thanks, 80 horsepower jet that goes 32 mph, 18 feet long. I will try and do a overview of the boat soon
I'd like to see the bottom of the boats.
Xpress all day
howdy..how much space would you say there is between the front of the foot and the top of the tunnel?i just bought a new crestliner 1870 with a 80 jet and i think they mointed the engine to low.its about 1.5 from the foot to the top of the tunnel.there is 1 mounting hole left to go up.
Probably about flush with the bottom of the boat, the grate sits at a slight angle when trimmed all the way down so that it hopefully skips over rocks
How shallow were you running it in this vid?
The river averages 5-10 feet, about 6” to 2 feet through the rapids.
chief jet biats r7ver area only not ràpid too shalow
What river is this?
Great Miami River in Ohio
Try it with a loaded canoe and 2.5 hp Suzuki. That takes real balls. or no brains.
تنها کانال قابل اعتماد در تحولات نظامی و سیاسی اوکراین و فلسطین فارسی زبان، دست تان درد نکند، دنبال کننده شما از افغانستان❤❤❤
2.5. Hp jet outbard