Best Bang For Your Buck Jonboat
Вставка
- Опубліковано 22 сер 2024
- This is my favorite boat to build. Weldbilt 1652. When it comes to a welded boat, you're not going to find a much cheaper price than a Weldbilt. Plus, they are one of the lightest welded hulls on the market. They might even be at the top of the list. For comparison
Tracker Grizzly 1648 weighs 640# (CRAZY!)
Weld-Craft ssrl 385#
Allweld 1648 360#
Xpress 1650 341#
Weldbilt 1648 310#
Now, some of these hulls are .080 and some are .100 (plus they come in different styles), so the comparison is not exactly the same. However, one of my typical full builds usually comes in around 150-175# That puts you all in under 500# Obviously, the weight distribution is critical, but I've got this down to a science! People always ask how my boats run so fast with small outboards... well, there's your answer. You cant forget about jackplates (motor height, and setback) and Props. Everything has to be just right and fine tuned for each boat!
www.sportsmari...
Support me and rep trickedtins merch 👇
www.trickedtin...
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDT...
bit.ly/TrickedT...
www.TrickedTins...
Follow my videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brother's company check him out👇
...
bremmyproducts...
bremmyproducts...
Tricked Tins Crew 👇
DruYoder with Yoder boats.
www.Facebook.com/yoderboats
...
Casey Bass With C bass welding.
/ @cbasswelding
/ cbasswelding
Simeon Terrell aka Sham4reel
/ @sham4reel764
...
Agreed! 1652 is the perfect size for a jon boat. Can't wait for the build. Always impressed man.
Thanks brotha
This is project X the whole 10 episode series is up on my channel
It was welded in position. Vertical tig on this stuff can be challenging.
If vertical tig is challenging for you then you shouldn't be welding boats. Js
Just bought my first Jon boats. And got a weldbilt 16/48. You helped me with my homework. Thank you
Awesome. That's a great foundation to build on.
Always on the grind!!! We need to have another tricked tins tournament and get the builds together!!!
Agree
All great points and reasons -- Matt, you really make it hard to argue .... WAIT --- You wasn't lookin' for an argument; you said buy what makes you happy! :) This build will be more instruction; no one said it would be easy but it ain't complicated!!! Let's see where this goes shall we!?! Be Safe
Thanks Rod. Definitely going to be a mix of The Creature and King Neptune
A BEAST you say... Let's Gooooooo :)@@TRICKEDTINS
Weldbilts are so fire. Love my 1652. Can't wait to see the build brother.
Yessir coming soon!
Those weld bilts are built to withstand duck hunting, this will last forever as a bass boat😂
You'd be surprised how hard these guys fish
@@TRICKEDTINS couldn’t imagine harder then we duck hunt, we smash through ice almost all December usually, but i know what you mean, it’s really cool what u do, me and my brother flip duck boats
Nice. I want to build a duck boat
I love living in Arkansas.
Thanks for the breakdown, super helpful
Np brotha
great video. Since you asked, Id love to see a video of you doing UMHW to the bottom of the Weld Bilt!
That is something I do want to venture into, but I dont think it will be on this project. After seeing how many bolts went into the UHMW on the jetboat build i would definitely use the weld on anchors.
Hell ya that's a great idea! Thanks for the sweet videos.@@TRICKEDTINS
I been doing so much research and i think you got me set on this exact boat. I have no idea where i can find one here in CA though i cant find any info online. I want a hull under 6k
G3 is nice too
Those side supports are intentionally not welded all the way in. Lots of designs call for pieces to not be welded fully to allow for flex, if you full weld it and make it rigid it will crack under stress.
Lets be foreal. Ive personal spoke to the guys at weldbilt. These weld locations are not specified by an engineer. It's up to who is working the shift your boat is built.
I have a big Jon boat with that has aluminum floor front and bad deck. 28 hrs old. 96” wide by 20’ long. Tunnel. That evidently has held water in middle see that now I am getting small holes in it mean8ng there is corrosion setting in. Is there any way to replace boor boat or just keep patching till time to throw away?
Great video, thanks! Question: what is the hull of this boat like? Absolutely flat, or does it have a gentle V? I am looking for an inexpensive boat to use in a strong river and in saltwater delta of the pacific ocean. Generally flat calm water, but occasional heavy chop and sudden squalls so it has to be sea worthy (inshore, along the mangroves). Is this the boat?
This is a semi V
Morning,nice boat🥰🥰🥰
Thanks
Is it fully flat on the bottom in the back or is there still some deadrise to it? I’m looking for a light mod v that comes to fully flat for duck hunting so I can slide over everything without problems
It's pretty much flat. The v in the back is so small. You almost can not see it.
I cannot find this boat for that price
Sports Marine Center
(757) 595-9333
g.co/kgs/YRh2X5S
great video!! i want to buy that boat with thing already built out. is there a place i can call to order? thank!!
Weldbilts are sold all over the US. If you want one of my rigs, email me. Professionalwelding@gmail.com
What is the maximum hp on a 1652?
Says 60 but ive seen 90s
Could you imaging a 90 on this??!!! 😂 I was thinking upgrading to a 40-50 tiller when I get back home
Can you run a surface drive on that thing?
Sure
Was that price incuding the trailer?
Hull alone retail around $3500
Not a bad deal for a fully welded custom hull
Dude! That boat dealer is near me.
Are you located South of them like me????
I am in Chesapeake, VA
I live in Chesapeake
Awesome. I didn't realize you were in my area even after watching at least a dozen of your videos for the last few months while nerding out on jon boat mods.
I just got ahold of a 1436 jon for me to learn how to mod, repair, and paint.
I commute down to Elizabeth City, NC every day to work on aircraft down there. I have been watching everyone modify and create sheet metal work to modify aircraft for a very long while now as I was fabricating/installing aircraft wiring harnesses and much more.
Maybe I will see you around some time.
Welcome to the underground jonboat world brotha!
@@TRICKEDTINS
😆
I went and did my first brazing on it yesterday evening. Went way faster than I thought it would. It was almost like soldering but a bit different.
Just a few dents to repair now before the trailer arrives... then I can start taking her out a few times before I start modding heavily in a few months.
How do they compare to the G3 welded 1548? Are the g3s decent?
Yes they are nice. Ive never built one out but id recommend G3
@@TRICKEDTINS I make impulse decisions,I just ordered a weldbilt 20 minutes ago lol love the video man
How much does the boat cost boss😊😊😊
Around $3500
@@TRICKEDTINSis that without trailer? I’m guessing so.
@@travismorgan4249yes without trailer.
@@travismorgan4249yes, i was quoted 5100 with a trailer from sports marine
If it's near where i am,it' expensive,within RM15000
Was f***ing agonizing trying to figure out the brand of the boat, until I realized you were not saying that it was a well built boat, but that was a "weld built". I was like come on dude, what is it?!?! Edit: anyway....went to the website, then to every dealer site, no prices anywhere. I guess they have zero interest in actually selling boats, just advertising them for funsies.
Lol i said the name a dozen times and its in the thumbnail. Idk man. Search weldbilt dealers near me. Ive never had an issue. Look up Backwoods landing they have prices on thier website. You can literally call weldbilt factory direct and talk to someone on the phone that can give you the closest dealer. Google weldbilt boats +1 501-794-0648
@@TRICKEDTINS I know, I watch tons of videos rapid fire, don't catch the details like I should. I did take the time to go back 3 times through the intro to figure it out though, I may be thick but at least I knew I was probably missing someone obvious 😁
Nice boat but lil on sloppy build, I seen lots better
Im sure but for the price range its hard to beat.