Thanks!! The only video that i found that expline about the 4 grey parts that i need to tale of so the millenium will stay on place! And thanks to to say how the 4 red parts need to be so tje cabin will be on the top!
Step 13 probably didnt work in the software he used as it involves flexing the frame a bit to get the blue pin in.. The pin seems to be 13.5 studs or so away. Also thanks for the tips, I would definately recommend 2 or more people for this unless you want to put the falcon on the ground and lean it against a wall which risks pieces coming off
Why wasn't I recommended this video 2 days ago when I was installing mine 😂 I was so lost trying to install the cockpit on the bottom and the pins wouldn't match up
Jeez tou made this way harder than you needed to! Get three small boxes (like storage or lunch boxes) which stand approx 6-8inches high. Remove all but the front single leg.and the two furthest ones back. Stand the falcon on the three boxes and then attach the stand from underneath....it took me about 5mins to fit this stand with all panels still attached (although two did fall off lol)
Very helpful video. Do you have a link to purchase this stand? All of the ones on amazon I am finding are similar but not the same, and I’m nervous about buying a knock off and having my Flacon fall off my shelf
Great question. I personally finish it first because it makes it easier to build when it is off the stand. I would not want to build it on a slant. Bur, it would be the step where you install the landing gear. Hope that helps!
Thank you. I bought this stand but then I didn't think it could hold it so I bought another kind. I am going to see if my smaller falcon will fit on it. But yes not giving any instruction on how to mount it is very frustrating so Thank you for this video
Dudeee absolutely thankful that I found your video. It helped a lot on how to get all things together in order to display my Falcon. Thanks !
You are very welcome. That was my whole point of making this video. I am glad it helped!
Thank you I was so frustrated about it not going together right... I thought I did something wrong
Thanks! I really needed to see this so when mine finds it's permanent home I know how to mount the stand.
Thanks!! The only video that i found that expline about the 4 grey parts that i need to tale of so the millenium will stay on place! And thanks to to say how the 4 red parts need to be so tje cabin will be on the top!
You re very welcome. Thanks for watching.
@@aaronfischer1836 I finally succes to put the falcon on the stand a few weeks ago, thanks!
@@pablomilsztein6730 Wouldnt it be easier to install the stand during the building process where you no longer have to flip the Set?
@@rogueninja4719
Maeby, i know people that they did it that way. I didn't 😅
@@pablomilsztein6730 fair and nice
Step 13 probably didnt work in the software he used as it involves flexing the frame a bit to get the blue pin in.. The pin seems to be 13.5 studs or so away. Also thanks for the tips, I would definately recommend 2 or more people for this unless you want to put the falcon on the ground and lean it against a wall which risks pieces coming off
I cant be the only one who misunderstood the title and thought it would tip over
Thanks man. Made all the difference to me. Great job! 👍🏻
I just flip my falcon over and attach it while the falcon is flat upside down with the loose panels off.
While I see your video is a few years old, I have recently purchased the Efferman stand and stuck on steps 20 and 21
My instructions were a PDF, very blurred, couldn't make out what went where, very frustrating, lot of building then deconstruction 😅
Why wasn't I recommended this video 2 days ago when I was installing mine 😂 I was so lost trying to install the cockpit on the bottom and the pins wouldn't match up
Jeez tou made this way harder than you needed to! Get three small boxes (like storage or lunch boxes) which stand approx 6-8inches high. Remove all but the front single leg.and the two furthest ones back. Stand the falcon on the three boxes and then attach the stand from underneath....it took me about 5mins to fit this stand with all panels still attached (although two did fall off lol)
Very helpful video. Do you have a link to purchase this stand? All of the ones on amazon I am finding are similar but not the same, and I’m nervous about buying a knock off and having my Flacon fall off my shelf
You can find online instructions for free and you can order the pieces off of brick link
Hi, i wanna ask in which step of creating the millenium falcon u can install the stand? or should i finnish it first?
Great question. I personally finish it first because it makes it easier to build when it is off the stand. I would not want to build it on a slant. Bur, it would be the step where you install the landing gear. Hope that helps!
Thank you. I bought this stand but then I didn't think it could hold it so I bought another kind. I am going to see if my smaller falcon will fit on it. But yes not giving any instruction on how to mount it is very frustrating so Thank you for this video
nope nope nope nope