Please remember to like the video and share, really helps my channel grow ❤Video published 18th jan 2023…. Hopefully theres a easier fix for the iron falsing real soon 👍🏼👍🏼👍🏼👍🏼
I'm looking at stepping away from the Simplex and getting another machine. I'm torn between going for the legend or the 900. What's your recommendation Sid? I know you're waiting on the Manticore coming but a bit pricey for me. 😂
Alright Sid I was the other bloke with the 900, good to meet you. Went out the next day on pasture and the field was far less irony. Same settings and pulled up a crotal bell and a hammy. Been doing more tests and the 900 finds the hammies on their side no problem. See you on the next one bud 👍
It only takes a few seconds but with my 800, I always work the coil back and check the target with the tip of my coil. That way you get the low grunt from the iron and not the overwhelming signal that gives you a good tone. 👍🏻
I've got the Nox 900 and had 2 hammered on it now, both cut halves a little short cross and a tiny wafer thin Elizabeth 1 both have rung out at a very stable 21-22 on the numbers around 6 inches deep, one of them with iron in the same hole which it didn't detect at all only found with the pointer. I have found some iron signals coming in around the low to mid 40's dug them to start with and all were quite chunky pieces, have noticed now with the sounds that the iron signals give a chirpy noise at the end where as true non ferrous in the 40's are just a clean sound if that makes sense. it's certainly fun working out a new machine especially when its new to everyone so we are all learning at the same time!
Great video, thanks! I got my 900 yesterday and used it today and once I was done for the day I felt a bit disappointed with the amount of falsing it did on iron nails(and some bigger bolts/nuts). As you say it is definitely a learning curve! This is a totally new switch for me, I went from Garret AT Max to Exuinox 900, the upgrade is big and the machines are very different so I have to spend some time with it, but again I do feel a bit puzzled by the amount of iron falsing I got. Do you feel as if you have enough to talk about or new things to share to make a video about iron falsing on the 900? How to spot it? How to avoid it? etc. Thanks again, hello from Norway!
Dont run sensitivity too high on iron infested land, up recovery speed to 6-7 when you get a iffy signal try to get a better tid by honing in on what you think is the good target with very small swings of the coil, if the target still sound bad and you can’t get it to repeat then its most likely iron, also the tid numbers will be very erratic
Congrats Sid on your first ‘Ammered with the 900. Very glad you got one. I’m liking it more, the more I use it. Really good machine. Take care mate 🦘🦘😁👍
I’ve been using my 900 for the first time today and noticed exactly the same thing with the nails, I’ve been thinking of raising the iron bias a bit Sid, what do you think !
And this video of the 900 is why I'm glad to of gotten Anything Minelab and I have the X-Terra Pro Now and it's a little baby Brother to the Equinox 900 and it's Abilities to tell you about the target.....
I've never even dug a iron nail with 800 may be that's one of the upper hands with 800 lol great video sid and very interesting all the best Paul from Staffordshire 🇬🇧 👍 👍
I've been running the 700 fior a few months now and I don't think it's possible to learn the numbers. I've had lead come in anywhere from 18 to 80. It's also murder for showing iron as good signals. I've dug more iron with the 700 than I did with the 600.
I wonder what causes MF to false on iron. Ive had a couple of 800’s that were bad on discriminating certain iron targets, I then moved to the deus which rarely falsed. Just moved to the deus 2 and thats the same as the 800’s so got to be down to MF. Even gone over iron with deus 1 and 2 in the field, deus 1 clear loud iron grunt, deus 2 “89” dinger.
Sid have you had enough time with the 900 to say if it's an upgrade from a Legend yet? I'm not looking to switch from legend at the moment as still learning it but wondering if the 900 offers a significant amount more. Contentious subject I know and largely subjective but interested in your thoughts as a legend fan too.
No i cant see a massive leap in performance over legend… i still recon the legend is a brill machine especially after you’ve put the hours in and learnt it.. i have still got to update the legend to latest software yet…
Yeah i am so far… the deus ii needs the update everyones been asking for for ages! It could all change with a D2 update but for me and my style of detecting the deus 2 don’t cut the mustard
Sid your a master with the 800 did you pick the 900 over the manticore or did the manticore not interest you? Love your videos mate best on UA-cam more please!😊😊
Fantastic vid Sid! best I've seen really helpful, can we have more of these detailed digs on the 900 please. I want to learn more. Also been looking for gloves and yours are looking good and warm have you got a link to them. Cheers
@@englandshistory hello and thank you for your videos, could you give me your program that you have for the field, thank you, alain from belgium, you can write it to me in english 👍
Complimenti per li video sempre super GoPro e un po di Bella roba Monte Amen coin silver buona super fortuna ☘️☘️☘️☘️☘️mitico cercatore 😎😎😏😏😏🤗😉😉🤙🏻🤙🏻🤙🏻🤟🏻🤟🏻
Another too expensive detector like deus 2 since the fcc kept power lowerd at least in America think my whites idx pro has more power then these new ones these came out 30 40 yrs ago don’t think the fcc cared at that time like one I have other then mine lab Ctx or the etrac idx pro may be 11 or 12 volts but that makes for a lot of weight did not know that detectors give off lots of interference
Please remember to like the video and share, really helps my channel grow ❤Video published 18th jan 2023…. Hopefully theres a easier fix for the iron falsing real soon 👍🏼👍🏼👍🏼👍🏼
I'm looking at stepping away from the Simplex and getting another machine. I'm torn between going for the legend or the 900. What's your recommendation Sid? I know you're waiting on the Manticore coming but a bit pricey for me. 😂
@@MM0SDK to be honest very little between them, if i had to pick id probs go for the 900
@@englandshistory Thanks Sid. I guess it's a question of ... is it worth the extra cost.
@@MM0SDK thats where nokta have cracked it, brilliant performance but way cheaper in price than competitors
@@englandshistory That's what's making it hard for me to justify the 900. I need to have a crack on the two and see how i like em.
Alright Sid I was the other bloke with the 900, good to meet you. Went out the next day on pasture and the field was far less irony. Same settings and pulled up a crotal bell and a hammy. Been doing more tests and the 900 finds the hammies on their side no problem. See you on the next one bud 👍
Hello mucker 👍🏼👍🏼👍🏼 yeah the 900 does seem to have the edge over 800 just a case of learning the language of the iron again
It only takes a few seconds but with my 800, I always work the coil back and check the target with the tip of my coil. That way you get the low grunt from the iron and not the overwhelming signal that gives you a good tone. 👍🏻
I've got the Nox 900 and had 2 hammered on it now, both cut halves a little short cross and a tiny wafer thin Elizabeth 1 both have rung out at a very stable 21-22 on the numbers around 6 inches deep, one of them with iron in the same hole which it didn't detect at all only found with the pointer. I have found some iron signals coming in around the low to mid 40's dug them to start with and all were quite chunky pieces, have noticed now with the sounds that the iron signals give a chirpy noise at the end where as true non ferrous in the 40's are just a clean sound if that makes sense. it's certainly fun working out a new machine especially when its new to everyone so we are all learning at the same time!
Yeah that seems the same outcome as i found in the video…. Maybe were onto something 👍🏼👍🏼👍🏼 everyday is a school day
Hi Sid, i like how you kept it live to keep it real mate.
Great video, thanks!
I got my 900 yesterday and used it today and once I was done for the day I felt a bit disappointed with the amount of falsing it did on iron nails(and some bigger bolts/nuts).
As you say it is definitely a learning curve! This is a totally new switch for me, I went from Garret AT Max to Exuinox 900, the upgrade is big and the machines are very different so I have to spend some time with it, but again I do feel a bit puzzled by the amount of iron falsing I got.
Do you feel as if you have enough to talk about or new things to share to make a video about iron falsing on the 900? How to spot it? How to avoid it? etc.
Thanks again, hello from Norway!
Dont run sensitivity too high on iron infested land, up recovery speed to 6-7 when you get a iffy signal try to get a better tid by honing in on what you think is the good target with very small swings of the coil, if the target still sound bad and you can’t get it to repeat then its most likely iron, also the tid numbers will be very erratic
Well done Sid 👏
Congrats Sid on your first ‘Ammered with the 900. Very glad you got one. I’m liking it more, the more I use it. Really good machine. Take care mate 🦘🦘😁👍
Cheers buddy 👍🏼👍🏼👍🏼👍🏼
Great video 📹, peace from the Republic of Ireland 🇮🇪.
I’ve been using my 900 for the first time today and noticed exactly the same thing with the nails, I’ve been thinking of raising the iron bias a bit Sid, what do you think !
Ive been using it a good few times now and at first i raised the iron bias but im back to 1 again now, you will get your ear in soon enough 👍🏼👍🏼👍🏼
And this video of the 900 is why I'm glad to of gotten Anything Minelab and I have the X-Terra Pro Now and it's a little baby Brother to the Equinox 900 and it's Abilities to tell you about the target.....
I've never even dug a iron nail with 800 may be that's one of the upper hands with 800 lol great video sid and very interesting all the best Paul from Staffordshire 🇬🇧 👍 👍
Always fun to break out a new detector, congrats on the Hammie!
Thanks Sid. I’m out with my new 900 tomorrow. Wish me luck 🤞🏻
Yoo dont need it bab, 900 just sniffs the good stuff out for ya
@@englandshistory Sid I found an Edward 1st hammered today. So chuffed. 😝🥰
@@michellepower7163 that didnt take you long 🤟🤟🤟
Nice one Sid . Think I’ll keep the 800 and the ctx
For now . 😅
I've been running the 700 fior a few months now and I don't think it's possible to learn the numbers. I've had lead come in anywhere from 18 to 80. It's also murder for showing iron as good signals. I've dug more iron with the 700 than I did with the 600.
I wonder what causes MF to false on iron. Ive had a couple of 800’s that were bad on discriminating certain iron targets, I then moved to the deus which rarely falsed.
Just moved to the deus 2 and thats the same as the 800’s so got to be down to MF. Even gone over iron with deus 1 and 2 in the field, deus 1 clear loud iron grunt, deus 2 “89” dinger.
Been thinking about getting the 900 but added the Legend to my collection,hopefully i don't regret it lol.
Ive had some cracking finds with the legend, great machine
Well done on the hammered mate👍
Nice video well done Sid
nice Hammered Sid good video mate 6" snow up here end of the month or February for me all the best mate HAMMERED
Never 👎 🤦♂️ hopefully your out digging soon
Sid have you had enough time with the 900 to say if it's an upgrade from a Legend yet? I'm not looking to switch from legend at the moment as still learning it but wondering if the 900 offers a significant amount more. Contentious subject I know and largely subjective but interested in your thoughts as a legend fan too.
No i cant see a massive leap in performance over legend… i still recon the legend is a brill machine especially after you’ve put the hours in and learnt it.. i have still got to update the legend to latest software yet…
@@englandshistory appreciate that thanks. I haven't updated it either yet but will do soon.
I definitely have to turn down the sensitivity that helps
hi are you finding the 900 to be better than the deus 2
Yeah i am so far… the deus ii needs the update everyones been asking for for ages! It could all change with a D2 update but for me and my style of detecting the deus 2 don’t cut the mustard
Sid your a master with the 800 did you pick the 900 over the manticore or did the manticore not interest you? Love your videos mate best on UA-cam more please!😊😊
I got the 900 because i didnt wanna wait for the manticore… but will be getting one when there in stock
Omg that is amazing 👏 what a great job
Nice one on the hammered Sid 👌🏻
Happy days mucker, hows the manti ??? You been out much yet
@@englandshistory only 3 hrs Sid to get me head round it, you’re gonna like it let’s put it that way 👌🏻
Great video as usual Sid. 👌
Cheers ste, have you got the 900
@@englandshistory no Sid, I’ve got the manticore, been out a few times with it, it very good 👍
Well done Sid on the hammered , any old iron though lol 🤣👌
🤪🤪 scrap iron, any ole iron
Fantastic vid Sid! best I've seen really helpful, can we have more of these detailed digs on the 900 please. I want to learn more.
Also been looking for gloves and yours are looking good and warm have you got a link to them. Cheers
Infrared golf gloves : under armour
Hi Sid. At least you got the right make of pinpointer !! Lol 😂
😂😂😂😂😂
Great video thanks for sharing 👍
How loud donyou have the iron tones?
I set mine quite quiet so all the good tones bang through
Top job sid u legend
Great video 😜 how are you getting on with the manitcore 🙏
Still waiting for it to be delivered 😂😂
What sensitivity were you using sid
Bonjour et merci pour ces belles vidéos, pourrais tu me donner le programme que tu utilises, merci d’avance, Alain de Belgique 🇧🇪
Sorry mate i cant speak belgium
@@englandshistory hello and thank you for your videos, could you give me your program that you have for the field, thank you, alain from belgium, you can write it to me in english 👍
@@foxdetecte9619 ua-cam.com/video/RDLNx3ILxr4/v-deo.html
@@englandshistory thank you very much
Hi mate I love your UA-cam channel keep them coming what pin pointer are you using
I use the mi6 from xp
Complimenti per li video sempre super GoPro e un po di Bella roba Monte Amen coin silver buona super fortuna ☘️☘️☘️☘️☘️mitico cercatore 😎😎😏😏😏🤗😉😉🤙🏻🤙🏻🤙🏻🤟🏻🤟🏻
Relic hunt is legal in uk law?
Very nice Sid I'd like to see you run the manticore over that field mate 👍
Yeah will be interesting to see, i cant wait to see what the manticore performs like
Addicted To Bleeps calls it the ‘Manticore-Blimey’ I think He’s impressed
@@leeh4722 yeah a lot of people that have the manti and loving it 💪🏻💪🏻
Another too expensive detector like deus 2 since the fcc kept power lowerd at least in America think my whites idx pro has more power then these new ones these came out 30 40 yrs ago don’t think the fcc cared at that time like one I have other then mine lab Ctx or the etrac idx pro may be 11 or 12 volts but that makes for a lot of weight did not know that detectors give off lots of interference
Power is only a pinch of whats involved to make a good machine…
Thank god that "music" stopped
thank you.
Minelab made the 800 so good it can't be bettered
I love my deus 11 all the way. Young man. Nice video
Yeah its also a great machine 👍🏼👍🏼