Thats not all. You also need test drive after this. Tripstronic gear 3 or 4 2000/4500 rpm max for about 10 min. After this reverse, and them normal drive in D, and let the car shift all gears.
Hi Atony! How much time need to drive in reverse ? My car is working well only when I start it and shift from parking to drive or reverse it not respond I have to push brake padel 3 to 4 time then it respond and start moving. Do you think it need basic setting or it have some other issue. Thanks
Hi do you have a save scan of your car my car is the same as yours if you have would you post a scan code of the car I’m having some problems with mine thanks 🙏
Doing this procedure, but after getting 400 and starting the car it goes straight to 500, anyone got any idea what this might indicate ? (I had a error showing 5'th gear not selectable, but seem to have been able to clear that, but still got 500)
From Ross-tech wiki: NOTE: If the test drive cannot be performed in the recommended way or the necessary time, any remaining adaptations will be performed automatically during normal driving.
Hi, I have replaced the mechatronic unit on my car and performed basic settings however there are sometimes issues with engaging gears 2-3. Do i need to run one of the other options e.g IDE 12710-Initialization of clutch friction coefficient model after mechatronics exchange?
Do you have to do this after replacing your clutch and flywheel? The mechanic says after replacing the Clutch and flywheel the vehicle still says "clutch tolerance limit reached". Kindly advise.
I did it to a 65k miles dsg 7 1.6 tdi and the "clacking" noises are gone or much reduced between 2'nd and 3'rd gears on bellow 1700-1800 RPM
Merci thanks you Nice video
Thats not all. You also need test drive after this. Tripstronic gear 3 or 4 2000/4500 rpm max for about 10 min. After this reverse, and them normal drive in D, and let the car shift all gears.
Do you have a road to perform test drive? I don't.
@@caffecentralsmith1954 public road 🤷♂️ or do you live in the Middle of no where?
@@at0ny under the stone :D
Hi Atony! How much time need to drive in reverse ? My car is working well only when I start it and shift from parking to drive or reverse it not respond I have to push brake padel 3 to 4 time then it respond and start moving. Do you think it need basic setting or it have some other issue. Thanks
@@kashifjamal1719 did you find the problem mine like that as well
does in dq500 need to this when engine runing?
Hi do you have a save scan of your car my car is the same as yours if you have would you post a scan code of the car I’m having some problems with mine thanks 🙏
Wc setting do i need after changing gear box
After the 400 step the last 254 0 0 isn't working
Doing this procedure, but after getting 400 and starting the car it goes straight to 500, anyone got any idea what this might indicate ? (I had a error showing 5'th gear not selectable, but seem to have been able to clear that, but still got 500)
Hi, if 255 | 0 | 0 is showed, it would indicate the basic settings was interrupted or failed.
Hey do you know if this gearbox is in my 2008 Golf V? I can't find anything about the exact model number but it is a dry 7 speed dsg
Nice think you
The procedure is incomplete. You need to do test drive with specfic steps.
From Ross-tech wiki: NOTE: If the test drive cannot be performed in the recommended way or the necessary time, any remaining adaptations will be performed automatically during normal driving.
Perfect
Auto padre how much will vw charge me for this job
Hi, I have replaced the mechatronic unit on my car and performed basic settings however there are sometimes issues with engaging gears 2-3.
Do i need to run one of the other options e.g IDE 12710-Initialization of clutch friction coefficient model after mechatronics exchange?
Bleeding hydraulic clutch
Do you have to do this after replacing your clutch and flywheel? The mechanic says after replacing the Clutch and flywheel the vehicle still says "clutch tolerance limit reached". Kindly advise.
Hello friend whenever the Clutch is replaced you have to make a básic Setting.
Si esplicara estaria bien pero parese antro