5. Your First Fused Dichroic Glass Pendant To Sell
Вставка
- Опубліковано 16 тра 2020
- This fifth video follows on from the previous 4 which prepare you for your very first dichroic glass fusing. In this video we actually get into choosing, cutting and fusing your glass to make some delightfully colourful pendants. You do not need any specialised glass for this project, just ordinary dichroic and clear glass. The easy way to learn how to make beautiful dichroic glass pendants to sell online or at craft shows or to give to family and friends or even keep for yourself.
Website: www.ddbjewellery.com
Facebook: https: // handmadejewe ...
Instagram: / ddb_jewellery
www.ebay.co.uk/sch/brit_in_sp...
Thank you for this really good informative video. I am just leaning about the glass & looking forward to starting to make things..
Thank you Victoria for taking the time to comment. It is much appreciated :)
Thank you for the wonderful directions
Its my pleasure. Thank you for leaving a kind comment Tammy :)
You explain things very clearly and make things look simple! Like your videos. Thank you!
Thank you Tina, much appreciated :)
You should do a video about kilns. I have a tiny kiln with no way to tell what the temperature is so I'm wondering how I would make these lovelies and know when they are done. Thanks !
Hi Lisa if you have the type of kiln I am thinking of (I started off with the same type but I only used it for silver clay) it is difficult to advise. You can only really open the kiln and see how the glass is doing. If you do not want the expense of a bigger kiln then maybe you could try a microwave kiln. I have some videos about those too. Hope this helps. :)
@@ArtsandCraftsTI thank you, I do have one of those as well. I need to just jump in and get started making some things ! I'm a jeweler so I want to make some for jewelry
Why did you do the top piece dichroic side down please?
Hi Lisa. Thank you for your question. I did that so it would create a nice clear cap to the piece :)
Can you fuse these in the microwave kiln? If so, how long?
Hi Lyn. Yes you could fuse in the mwk but with care because they are thick pieces and might shock and break. I normally use the kiln for thin pieces, or frit, or small pieces so I can go straight to full 100% power. When fusing thick pieces like this it is better to start off at say 20% power for 4 mins, then 30% power for maybe 4 mins, then 40% or 50% then up to 100%. Its trial and error. If I am fusing in my mwk using thin or small pieces I go 8.45 to 9 mins for a tack fuse and 11 mins for a full fuse. These are when the kiln and mwk are cold. I have a lot of videos where you can see me using the mwk and I am just preparing some more which will be uploaded soon. Hope this helps. :)