Це відео не доступне.
Перепрошуємо.
Kemimoto fender eliminator kit - Ninja 650 / Z650
Вставка
- Опубліковано 2 чер 2020
- What's going on youtube?! Shoutout to Kemimoto for sending me this to review and install it! Here's a video about how to install a fender eliminator kit for kawasaki ninja 650 and Z650 2017-2020. I was not paid to make the video , just sent the kit and I gave it away for free to a lucky Ninja owner. Thanks for watching!
Link for fender eliminator :
KEMIMOTO fender eliminator kit : amzn.to/48DxFX3
Fun fact - those 4 screws that held on your old fender with the loctite also fit in the holes where your front reflector mounts are screwed into on your forks. so you can take off those orange reflectors and the long bolts they sit on, and screw 2 of those screws into place for a much cleaner look up front
Just got my fender today and the exact same one. Can't wait to install. It looks way better and sportier in my eyes.
At 3:56 someone’s gettin it then the police sirens kick on 🤣🤣🤣🤣
Awesome video! Thanks for taking the time to walk through the process and give viewers a clear understanding of the steps.
Glad I could help!
Thanks man I just completed my 2021 and your video was very helpful.
Thanks for watching man!
Buonasera amico. Molto bene! Sicuramente è migliorato molto, ha migliorato notevolmente l'estetica della moto. Video molto buono.
Nice video. I'll be installing mine tomorrow. One suggestion though. On the bolts that holds it on I'm putting a drop of Loctite on. It will help them resist loosening due to vibration.
The original have a dab of Loctite on them.
Good point! Thanks!
Awesome video. Look forward to installing mine! I’m sure it will take me longer! Looks great!
Thank you for this Video.. ill being using this to install the fender eliminator...
Thank you!! Worked for 2022 ninja 650
Awesome!
official video and helped me a lot. Thanks homie!
You’re welcome bruh!
Thanks for the video! 3:58in you hear a Dodge Challenger scat pack taking off lol
Not sure what car was it but sounded good lol
Just did mine with this video, thank you so so much! Perfect!
You’re welcome! Glad I could help 😊. Ride safe! 🏍💨
You made this very easy! Thank you so much!! ❤️
You’re welcome! Thanks for watching!
Nice bike bro and it does look way better with the fender eliminator.... thumbs up
RandomVideos502 thanks brotha!
where did you put the black rubber gasket? did i miss it?
Which black rubber gasket? Can’t remember was a while back?
It goes on the tag light , he missed it , was in the bag with the nuts ….
You da man
Thank you
thank you SO MUCH for this video, helped me so much with my 650 fender eliminator install. Can you possibly do a video regarding putting in white LED headlights on this thing? can you just buy headlights and plug and play and replace the old ones or do you have to do additional wiring or anything?
Check out my other video about the older ninja 650 led headlights install. Should be the same
Hell yeah thanks for the video!!
Awesome video! Thank you so much, very informative and helpful! Hoping all the same directions apply when I do this to my 2020 Ninja 650! This will be the first time I am doing something like this so out of curiosity how do you get the licence plate on there? Is just screws or something?
Grant Ginn it’s really easy! If needed come back to the video and do it along with it. I pretty much recorded the whole process , too little edits .
Awesome thank you, you really did make it super easy to follow it's amazing! For the final step though (Putting on the licence plate) is it just screws and that's it?
Grant Ginn yes . You can use any screws for the license plate. Your choice! Usually the bike dealerships have the ones with reflectors on them and spring washer in the back
@@MotoRoUsa Cool thank you for taking the time to respond and help me out! Super appreciated!🙏
Grant Ginn no problem man! Thanks for watching !
Thanks
Thanks 🙏
Thanks bro.
Awesome video. Thanks
TheTriggaman177 thanks for watching !
I’ve got the same one. Did everything the way it should. Only problem I’m having is putting the retainer back in. The seals look deformed and won’t allow the retainers to go back in. 😳
What seal and what retainer?
@@MotoRoUsa when you put the turn signal back in it’s the metal retainer you first put on. The rubber part of the light looks a bit deformed. Like it’s pushed in a bit but it’s all the way thinking that was the issue but it wasn’t.
There was a police chase going on in the background
Does it fit on a ninja 650 2024?
It should but check description in Amazon store
Does anyone know if this is still compatible with 2022 ex650?
If the tail end looks the same it should be compatible
@@MotoRoUsa thanks!
@@MotoRoUsajust got it today and got it done in about 45 min thanks to your video thanks a lot!!
I did my today and I did the same mistake he did. Hahahaha maybe I should’ve watch the video first lol 😂 anyway thanks
I did mine on my 2021 ninja 650 after watching this video. Everything went well but something happened with my rear seat it won't lock anymore. Has anyone came across this?
Unless you pulled the cable that goes to the latch I don’t see why it wouldn’t lock. Check to make sure what’s holding it from locking and go from there.
I checked the cable it is in place but when i put the seat down the latch seems to be pulling back a bit and not sure if I can adjust that
Is there a possibility to add a rear reflector (red), because in Europe (Belgium) this is obligated?
What reflector? The tail light?
@@MotoRoUsa a red one u put right under your license plate.
@@reneevandeputte8448 I’m not sure how you’re gonna attach it. Here in US we have license plate screws that have red reflectors on it. www.common-motor.com/red-license-plate-reflector-bolt?gclid=EAIaIQobChMIl6y1xfvB9gIVlqXICh1UCQ2JEAQYASABEgI9QfD_BwE
@@MotoRoUsa That is indeed the question, how am I going to attach it. I think maybe I make two extra wholes in my license plate, or I use the already existing wholes and put some metal with a reflector on in between, idk yet.
@@reneevandeputte8448 you don’t need to put two extra holes . We attach the license plate only on top two bolts and we use those reflective bolts like the ones I sent earlier in that link. We don’t use 4 bolts for each corner of license plate