Yoshimura Full EXHAUST INSTALL on Ninja 650/Z650

Поділитися
Вставка
  • Опубліковано 20 вер 2024

КОМЕНТАРІ • 127

  • @znixia
    @znixia Рік тому +3

    im only 16 right now and im really looking at this bike for my starter and this exhaust is just so nice to listen to and is super simple to install

  • @1991sealed
    @1991sealed Рік тому +4

    Yo, Chance! I said if I was doing my exhaust this winter I'd use your video and man thanks for making this. Me and buddy got it done in a couple hours this afternoon and this video helped soooo much. She sounds so rowdy! And will spit flames!

    • @Shxckr
      @Shxckr Рік тому

      How’d you get yours to spit flame????

  • @yoyocb6108
    @yoyocb6108 Рік тому +1

    Okay this is the best video i've found so far - THANK YOU

  • @zaromouth2507
    @zaromouth2507 2 місяці тому

    just used this video to install my yoshimura exhaust on my 2020 ninja 650 and this video was amazing, 45 mins and i was done thank you so much

    • @CHANCE_MOTO
      @CHANCE_MOTO  2 місяці тому

      Glad it helped out! Enjoy the amazing sound

  • @inkslingerdrew
    @inkslingerdrew Рік тому +1

    im giving you a sub man you deserve so much more keep making content like this

  • @Mike-ow5tz
    @Mike-ow5tz 4 місяці тому

    Thanks for the great vid! Just installed this on my 2024 Ninja 650, the sound difference is incredible! Went from sounding like a supped up lawn mower to a racing beast. Next up is ECU flash, Moore Mafia looks like a good choice to help max performance.

    • @CHANCE_MOTO
      @CHANCE_MOTO  4 місяці тому +1

      Glad if my video helped!! And I haven’t tuned mine personally but bet it’ll make a noticeable difference! 🔥

    • @Mike-ow5tz
      @Mike-ow5tz 4 місяці тому

      @@CHANCE_MOTO That's good to hear, I may wait a while and just see how it does before flashing. Don't need the extra performance, just wasn't sure if anyone had mechanical issues by not flashing, which a local dealer recommended.

    • @Mike-ow5tz
      @Mike-ow5tz 4 місяці тому

      @@CHANCE_MOTO So curiosity killed the cat and I went ahead and had the ECU flashed by Moore Mafia (recommended by my dealership). WOW! What an incredible difference, the bike not only sounds better but it feels way more responsive and for some reason smoother to shift. For me the bike is absolutely perfect now, couldn't be happier!

  • @OkinawaSurf82
    @OkinawaSurf82 4 місяці тому +1

    Great video I just installed an eBay “yoshimura” and it sounds the same and was same install. Thank you brother

    • @CHANCE_MOTO
      @CHANCE_MOTO  4 місяці тому

      Nice!! Glad the video was helpful too, enjoy the new sound!

  • @joeycapriglione
    @joeycapriglione 4 місяці тому

    great vid thank you ! i watched you and installed at the same time. the hardest part was getting the clamp in. thanks for this !

    • @CHANCE_MOTO
      @CHANCE_MOTO  4 місяці тому

      Glad I was able to help! Hope you’re enjoying the new sound 🔥

  • @T0NE3116
    @T0NE3116 Рік тому +3

    Great vid. Didn’t know if anyone else pointed this out to you but you installed the cylinders/spacers wrong on the bracket on the bottom of the frame. That last cylinder does not just act as a washer. It is tight but it fits on the inside space with the longer cylinder and the black bracket. Just FYI

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      I’ll double check it, thanks for mentioning that!

    • @soulofanunknownsoldier8066
      @soulofanunknownsoldier8066 Рік тому

      He did it right. The way you tried to explain to do it leaves no room for everything. I literally just installed this exhaust and tried it your way and didn’t work. I did it the way the video showed and voila

    • @MotorenWerkeN52
      @MotorenWerkeN52 Рік тому

      The smaller cylinder goes on the inside, it is not a washer. I just installed the exhaust yesterday and it does fit. Thinking of it logically, the other two pieces are free floating with the small gap. You would also be applying torque to the oem bracket with nothing to compress on. If you over torque, you could snap the bracket.
      There is another video on UA-cam that shows it done correctly or the yoshi instructions.

    • @MotorenWerkeN52
      @MotorenWerkeN52 Рік тому

      This shows it correctly:
      ua-cam.com/video/3qvYjkmeAFE/v-deo.html

    • @LMoney4
      @LMoney4 Рік тому

      ​@HyderMirza12 I've tried everything and that smaller piece barely fits in that spot without the bracket. I can't for the life of me get it to squeeze in with the bracket. Any tips?

  • @CHANCE_MOTO
    @CHANCE_MOTO  Рік тому +3

    I forgot to mention the torque for the 4 header nuts is 12-13 ft lbs. The audio doesn’t fully capture how loud the Yoshi actually is but it does come with a baffle if you ever want to put that on 😅

    • @markvidensek960
      @markvidensek960 Рік тому

      Hi Chance,
      Did you flash your ECU yet? If you did, where is the ECU and how difficult was it to get to the ECU? We appreciate your videos. Thanks!
      Mark

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      @@markvidensek960 Hey Mark, unfortunately I did not get a flash or remove the ECU to get it tuned yet. I most likely will in the future but it is underneath the tank. Let me know if you have any other questions and thanks for being here!

    • @jessicaredditt8826
      @jessicaredditt8826 Рік тому

      @@CHANCE_MOTO do you have to flash the ECU or is just recommended?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      @@jessicaredditt8826 little late but it is just recommended imo. I haven’t flashed mine and it runs perfectly

    • @newee89
      @newee89 Рік тому

      Hi Chance, Is the yoshi cat delete?

  • @1991sealed
    @1991sealed Рік тому +1

    Nice! If i do my 650 exhaust this winter this will be the video i reference

  • @soulofanunknownsoldier8066
    @soulofanunknownsoldier8066 Рік тому +2

    Thanks for this. Literally just got mine done thanks to you. Would have been lost on my own lol. It sounds so amazing, video does not do any justice.

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      Awesome!! It’s an incredible exhaust, glad I was able to help 🙏

  • @pinnacle_moto
    @pinnacle_moto Рік тому

    Very good point about the wearing of gloves. Not until after your first few rides that the exhaust starts looking terrible form all the burn human oil :)

  • @fbi424
    @fbi424 3 місяці тому

    Much love brother ❤

  • @garyboyce6186
    @garyboyce6186 7 місяців тому

    Perfect start to finish video. Very well done and thanks for explaining all details.
    Would it be easier to install mid pipe to exhaust springs before installing midpipe? Just seems really tight and awkward pulling those springs in tight area

    • @CHANCE_MOTO
      @CHANCE_MOTO  7 місяців тому

      I would install the pipes first, they really weren’t too bad and probably a ton easier if I took off the fairings lol

  • @Captain420Cronic
    @Captain420Cronic Рік тому

    Great video thank you!

  • @braniganblue3460
    @braniganblue3460 Рік тому +1

    Would love to install one on my '09 Ninja 650, but the Yoshimura website only goes back to 2012. Not really sure if some other year would be compatible. Enjoyed your video. Changing out mufflers is not as complicated as I assumed it would be before watching.

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      Kinda sucks that they don’t but maybe call their customer support to see if it’s compatible. Although it dis take me a while to get these because it was on back order for some time. Glad the video was helpful, ride safe! 🤙

  • @brtaylor91
    @brtaylor91 5 місяців тому

    Decent vid. Thanks dude

  • @inkslingerdrew
    @inkslingerdrew Рік тому

    Man this is what I was looking for, I got my 650 at the end of last year, first bike, looking to mod it up this summer and I'm by no means a mechanical guy. So when it comes to exhaust systems and specifically how the 650 is designed not being able to use a slip on in 5 mins I get worried ill buy the wrong shit or fuck up some how.

  • @slasher368
    @slasher368 Рік тому

    this exhaust best!!!!!!!!

  • @LedoGarage401
    @LedoGarage401 Місяць тому

    Would just taking off them fairings fully make it easier?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Місяць тому

      @@LedoGarage401 Yeah, it would give you more room to work with

  • @garyboyce6186
    @garyboyce6186 6 місяців тому +1

    I found my exhaust pipe stuck out to the side quite far. Would be vulnerable in a tip over. Is there a way of aligning it so it runs alongside and closer to the swingarm
    Did you get decel pops?
    I also changed out the stock air filter for a DNA high flow. I blocked the Pair valve to stop the decel pops. I also sent my ECU to MAS CYLCE SERVICE here in BC Canada. He did the flash
    Haven’t had a chance to ride it yet due to weather but I’ll send an update. Should be awesome.

    • @CHANCE_MOTO
      @CHANCE_MOTO  6 місяців тому

      The only way I can think of is to see if the end pipe is fully seated and turn it in a bit but I think even mine would take a dent if it tipped over on the right.
      Also, I do have decel pops and that's awesome that you get a tune, definitely keep me updated!

  • @LordRaider
    @LordRaider 4 місяці тому

    Did you have to tune it after don’t really care for more performance just heard it could mess the bike up without a tune

    • @CHANCE_MOTO
      @CHANCE_MOTO  4 місяці тому

      I've had it for over a year with no tune and no issues with the bike or any codes that appear on the dash.

  • @calvingad4315
    @calvingad4315 10 місяців тому

    Awesome vid! When you swap mufflers, do you put the o2 sensor back in or does it stay out?

    • @CHANCE_MOTO
      @CHANCE_MOTO  10 місяців тому

      Definitely put it back in

  • @tarasmoshniaha6338
    @tarasmoshniaha6338 3 місяці тому

    Can I install same exhaust on my Kawasaki z650rs? Should work I think..

    • @CHANCE_MOTO
      @CHANCE_MOTO  3 місяці тому

      Yes, the z650 is the same engine

  • @janessagarcia6485
    @janessagarcia6485 Рік тому

    Hey Chance thanks for the video! I had a few questions that im struggling to find answers to. Did you have to tune your bike at all after installing this? I just bought a 2023 Z650 do you know if this would fit?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому +1

      Glad it helped! No I did not tune my bike and imo it does not need to be tuned unless you want the most optimal performance for this exhaust. I’ve had no issues with it not being tuned. As for the fitment, it should fit since they really haven’t changed the engines but I would check check with the place you order it from.

  • @andrethompson3456
    @andrethompson3456 9 місяців тому

    Great video man. How is it fuel wise since you’ve change it. I got a 2023 ex650 n looking for the right exhaust to install

    • @CHANCE_MOTO
      @CHANCE_MOTO  9 місяців тому

      Honestly fuel economy didn’t change much from the full exhaust but the bike is lighter! If anything maybe I gained a couple miles more

  • @muhammadfitriadamadizi8574
    @muhammadfitriadamadizi8574 Місяць тому

    Oh my, so this stock pipe cannot do slip on?

  • @mosksky
    @mosksky Рік тому

    Great video for sure! Ty for that! Any suggestions on how to place the order? Mine got cancelled because I don't have any validation that I will be using it on the race track and not on streets 😭

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      That's strange that you even need that! Are you in the US? I ordered mine through RevZilla and never had to show any proof I was going to use it on the track.

    • @mosksky
      @mosksky Рік тому

      @@CHANCE_MOTO yep in PA, tried placing order on there website. Ty for the advice will do the same

  • @benmcculloch11
    @benmcculloch11 Рік тому

    Hey I added one of these to my 2022 ninja 650. Need any tunes at all? Or is it good to go after installation? Thanks man, great videos

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому +1

      I did not get it tuned and it runs without issue, but for optimal performance I would recommend it.

    • @mrpink9582
      @mrpink9582 Рік тому

      @@CHANCE_MOTO without a tune do you feel like its running rich or lean? or nothing at all. whats your gas mileage like before and after?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      @@mrpink9582 it may be slightly rich but nothing that would be concerning without a tune, and the mileage is still about the same at about 190mi for a 4 gal tank

  • @orlandoflores7720
    @orlandoflores7720 4 місяці тому

    After the install, did you get the bike tuned or buy a fuel commander for it?

    • @CHANCE_MOTO
      @CHANCE_MOTO  4 місяці тому

      Nope, I still haven’t and the bike runs fine. But if you want the most performance then definitely tune it

    • @orlandoflores7720
      @orlandoflores7720 3 місяці тому

      @@CHANCE_MOTO Thanks for the quick reply. I'm actually doing the research for a friend who just bought his first bike (2024 Kawasaki Ninja 650). I'm going to help him do the install. Great video, thanks!

  • @waliwhite1
    @waliwhite1 Рік тому

    Bro can u send me a video of how u got your rear selfie stick mounted thanks

  • @JimIahey
    @JimIahey Рік тому

    Awesome vids just subbed to you channel did you do any tuning after you put this on?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      Much appreciated 🙏 No tune at all, but maybe in the future

    • @JimIahey
      @JimIahey Рік тому

      @@CHANCE_MOTO I thought you need to tune it? Hows it run after installing?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      @@JimIahey no issues at all, doesn’t run rich or lean

    • @JimIahey
      @JimIahey Рік тому

      @@CHANCE_MOTO oh ok cool thanks alot man

  • @pinnacle_moto
    @pinnacle_moto Рік тому

    Very detailed and useful, subb'd as I also have a 650 in my collection.

  • @derickmurray369
    @derickmurray369 4 місяці тому

    Where did you order this from

  • @einfachmarco9187
    @einfachmarco9187 Рік тому

    Where did you bought that exhaust? I would like to check for it for my Ninja Kawasaki MY 650 2020

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      I bought it straight from RevZilla, of course had to wait a few months because it seems to always be out of stock.

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      www.revzilla.com/motorcycle/yoshimura-alpha-works-race-exhaust-system-kawasaki-z650-ninja-650-2017-2022

    • @einfachmarco9187
      @einfachmarco9187 Рік тому

      @@CHANCE_MOTO I just also found it ^^ but I saw that’s not legal for open roads and so you can’t use it in Switzerland 🥲

  • @rudyf2387
    @rudyf2387 Рік тому

    Did your bike throw a CEL? I have a z650 and I haven’t installed a full system yet cuz I’m scared for that CEL.

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому +1

      No codes as far as my bike goes, you use the stock O2 sensor and for me the change in flow didnt cause any issues.

    • @harmgriede
      @harmgriede 9 місяців тому

      ​​@@CHANCE_MOTO did you have a cat in your exhaust? And stil no eror of the sensor?
      I will buy a mivv ovall for the z650 2023 but im littel scared great video❤

  • @蔡隆輝-i3y
    @蔡隆輝-i3y 4 місяці тому

    Thx u video

  • @projectkamikaze1325
    @projectkamikaze1325 Рік тому

    Hey bro what’s the torque spec for the shifter lever? Thanks!

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      For a 6mm bolt it’ll be 50-60 in. lbs.

  • @jaysteezy7211
    @jaysteezy7211 Рік тому

    U think this 2017-2022 model will still fit on 2023 model? Should still be same no? I've been looking around and was only able to find up to 2022

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому +1

      I would say yes only because it’s still the same engine and if the 2023 stock exhaust looks like the 22 stock.

    • @jaysteezy7211
      @jaysteezy7211 Рік тому

      I've been looking online and they all go up to 22 for each brand for these 650s 🤷🏽‍♂️

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      @@jaysteezy7211 give it a few more months and it should be update, or call their services and ask, even though that might be a pain. It is the same for my ‘22 fairings, the dealership pretty much told me to wait for the part because they don’t have em yet

  • @Shxckr
    @Shxckr Рік тому

    Am I able to adjust how the exhaust extends out? Seems like I hit my heel on it when riding on the balls of my feet

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      You might be able to pull it slightly or turn the mid pipe at a different angle but I had this issue when I was first riding and just relaxed my foot on it. Idk if I ride different or picked my foot up, I don’t have that issue anymore riding on the balls of my feet

  • @Nwgaming-pl1ll
    @Nwgaming-pl1ll 5 місяців тому

    Did you tune it after

    • @CHANCE_MOTO
      @CHANCE_MOTO  5 місяців тому

      Nope still did not tune not, runs without issues

  • @inkslingerdrew
    @inkslingerdrew Рік тому

    One side of my headers is just a lil to big to fit idk what to do 😮‍💨

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      Strange that it is, if you’re positive that it won’t go on even with some muscle behind it then you could always file a bit depending on how close the fit is. Before you do that I would call customer support and see if they have an alternative. That’s so unfortunate 😓

    • @MotoKnight650
      @MotoKnight650 5 місяців тому

      Did you figure it out? I think I’m having the same issue one side doesn’t seem to fit

  • @moomoomilk60
    @moomoomilk60 15 днів тому

    what year is this bike?

    • @CHANCE_MOTO
      @CHANCE_MOTO  15 днів тому

      @@moomoomilk60 this one is a 2022

  • @vxf4tal1tyxv65
    @vxf4tal1tyxv65 6 місяців тому

    Do I have to get bike tuned since I’m removing the Catilityc converter?

    • @CHANCE_MOTO
      @CHANCE_MOTO  6 місяців тому

      Nope it will run fine without but if you want more out of the bike then yeah

  • @Slow_KZx10r
    @Slow_KZx10r Рік тому

    Do i need a full exhaust or can i just buy a slip on?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому +1

      Unfortunately the 650 can’t have slip-ons because it’s all welded, at least for the ‘22

    • @Slow_KZx10r
      @Slow_KZx10r Рік тому

      @CHANCE MOTO thanks for the info i appreciate it.

  • @Shxckr
    @Shxckr 11 місяців тому

    was your gas range or mpg affected at all?

    • @CHANCE_MOTO
      @CHANCE_MOTO  11 місяців тому +1

      Not that I’ve noticed.

    • @Shxckr
      @Shxckr 11 місяців тому

      @@CHANCE_MOTO aight thank you!

  • @Hecurles-sz1jz
    @Hecurles-sz1jz Рік тому

    Did you Tune it?

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      No not yet but it runs fine. I need to get it tuned though

    • @Hecurles-sz1jz
      @Hecurles-sz1jz Рік тому

      @@CHANCE_MOTO an authorized Kawasaki dealer just told me 500.00 to get the tuner 🤦🏾‍♂️ and that they wouldn't do it without because it's under the manufacturer wars and they can't guarantee it won't need with the engine.

  • @TPSAUXO2009
    @TPSAUXO2009 Рік тому

    The small round spacer in the instructions show its on the inside beside big spacetime but it doesn't fit. The way you have it the big spacer moves back and forth. Can you provide some insights

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому

      I just checked my spacers and when the long bolt is tightened there is no movement. Not sure what the issue would be but I have not had any problems doing it the way I installed the spacers. Lemme know if somehow I may be incorrect with it

  • @hellonobitah9467
    @hellonobitah9467 Рік тому

    Is that euro 4 or euro 5?
    Euro 5 norm destroyed the legal nice sound so I got the sc project

    • @CHANCE_MOTO
      @CHANCE_MOTO  Рік тому +1

      I think it would be Euro 4 because it replaces the whole system instead of a slip-on but not sure. SC is definitely still a good one