TBS Fusion - FIRST LOOK! - Set Up - Overview - Firmware Update - Flight & More !!
Вставка
- Опубліковано 8 жов 2024
- In Today's Video we check out the ALL NEW TBS Fusion! Just dropped a couple of days ago and we are going to see some flight footage, download and set up TBS Agent X, check out the menus, see our options for the power mod and much much more! Your not going to want to miss out on this!
TBS is doing big things..... as always. This is laying the foundation for a truly phenomenal eco-system of wireless communication with-in your drone, goggles and radio. This will be ground breaking and change the way we fly forever. Right now it is still in alpha stage, as the updates roll out the product will only get better as TBS has designed it to be able to update firmware easily through the computer software .
HOW TO DO PERMANENT POWER MOD:
• Fatshark MOD for Rapid...
Where to get your TBS fusion:
www.myfpvstore...
===▶️ / drainmanfpv
▶️Crossfire Nano SE:
✔️www.myfpvstore...
▶️Unify Pro 32 HV:
✔️www.myfpvstore...
▶️Caddx Air Unit for DJI
✔️www.myfpvstore...
▶️Custom DrainMan Motors!
✔️www.myfpvstore...
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
/ drainmanfpv
/ drainmanfpv
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2 Day Shipping)
amzn.to/2PjqUDi
✔️or
✔️www.myfpvstore...
▶️How To Taranis:
✔️ • How To Frsky Taranis
▶️My Electronic Screwdriver:
✔️ • ES121 Electric Screw D...
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
and
✔️amzn.to/2Oj7r8C
▶️1.5mm Driver:
✔️amzn.to/3txYarX
▶️Radio Receivers:
✔️www.myfpvstore...
▶️Hobbywing:
✔️www.myfpvstore...
or
✔️amzn.to/31e6jFM
▶️Loctite:
✔️amzn.to/39QY5HE
▶️Screw Pack:
✔️amzn.to/2BPzBSq
====▶️How To Set Up A Throttle Cap: (Become A Better Pilot)
✔️ • The Ultimate Throttle ...
====▶️My Go To Pack:
✔️4s : www.myfpvstore...
✔️6s : www.myfpvstore...
====▶️Flight Controllers:
✔️www.myfpvstore...
====▶️ Quadcopter Frames:
✔️www.myfpvstore...
====▶️ The Goggles I use:
✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
✔️Analog - www.myfpvstore...
====▶️My Radio:
✔️amzn.to/3sU9Fem
✔️Non-DJI: amzn.to/39dqI3c
✔️HD - amzn.to/2AVAEQo
====▶️ Video Module That I use (When Using Analog):
✔️ www.myfpvstore...
====▶️Bench Power Supply:
✔️amzn.to/3cpIOhE
====▶️Field Bag:
✔️www.myfpvstore...
or
✔️amzn.to/2TleAns
or
Ethix:✔️www.myfpvstore...
====▶️My 3D Printer:
✔️shop.prusa3d.c...
====▶️My Camera Used:
✔️amzn.to/2wX0eCg
====▶️My Cam Mic:
✔️amzn.to/3b2ZoUZ
====▶️Contact Me: @DrainManFPV on FB or DrainManFPV@gmail.com
====▶️I'Gizzle: / drainmanfpv
====▶️ / drainmanfpv
#TBSFusion #DrainManFPV
Very nice video :). There is actually a third way to power it: Instead of the flat PCB (ribbon) cable, you can run a single wire from the solder pad next to the ribbon connector to the goggle battery connector. This will power Fusion with 2S voltage. It's a bit more difficult to install and definitely voids the warranty of your goggles, but the advantage is that it reduces the power consumption, as Fusion has an efficient switching voltage regulator.
Dude I’m grateful for your videos and even more grateful for the time you take to help people like me to get into this awesome hobby. I’ve followed your videos more then once to set my stuff up and get myself in the air. I’ve subbed and look forward to more videos. Thanks again
the power mod has to be used on every goggle even the hdo its for the wifi wayne from tbs has a video on it to install it where you dont open the goggle check it out its pretty easy wear you fish the ribbon thru now what i herd is that doesnt void your warranty but i would double check . i do belive you have to use that board for it to work right i dont think your mod for the older goggles will work with this . might want to check into that i may be wrong but i do know even hdos have to have that little board installed . i think thats why your module is flashing like that . not sure yet mine will be here mon . great vid man
Would be nice to know if the power mod is needed anyways or not. Or when doing it if it hurts or not .....
@@christianandres1766 its needed for every goggle that i do know thats why his module is flickering like that its not supposed to do that look at other reviews
I ask a suplier.
If you want to use the modul in future with crossfire magic features something you have to use the mod on every goggle.
Because of wifi or so.
What flicker you mean in that video.
I wait til i get mine in hand and bud i think to do the mod could not hurt in anyways..... (as far as i understand it today)
Hey Guys, Thanks for watching! My goggles are only flickering Because my camera and my goggles are on different timing, it's no different then when you try to record a computer screen and it looks all funky.
Nice video, thanks!
btw where can I get those vinyl stickers for googles?
Love it. I'm going to wait on it a bit till they get it more together, but wow they are off to a good start.
I won't run this because you know I like my box goggles compared to fatshark BUT I still watched this video lol. Very informative! Nice video! It will help alot of people switching over from RF to Fusion.
Hahahaha!!!!
nice video thanks, just a small tip: lower your volume a little.
Great video! if fusion mode off is oldschool, is that same like legacy mode on RF? thanks if you can answer my question :)
Informative video bro. 👊
Just ordered one.. I'll have it Tuesday 😁😁
Lucky I want one. Super informative video 🤯 your videos =awesome 👍
Thanks Jay!
@@DrainManFPV very welcome, you have a store also?? Did not know. Definitely going to check it out 👍. You don't say much about it, and you have Hobby wing!! One of my favorite. Have a great Sunday.
@@ktmjay9920 I wish I had a store! I work for one. They are a really good store, I'm part time - DrainMan = Plumber lol I own a plumbing company. You have a great Sunday too!
With the ext cable will need 3 antennas?
Very informative and helpful video. Thanks DrainMan 👍🤓
Thanks John!
@@DrainManFPV hey man, how long should the update take?
@@DrainManFPV never mind I got it
sweet, i had suspected l1 and l10 mod would make the power cable unnessary.
Thanks man👍👍
This module looks great - I am a little worried about the ribbon cable power thing since i can be a little rough on my goggles. Did the power mod get added after the product announcement before shipping ? Or was that always the way to hook it up ?
That's always been this way, it is also how you must do the Rapid fire and the True - D X as well
ua-cam.com/video/HaZn8I2hwGE/v-deo.html
DrainMan FPV I have a true D. It just plugs in and works.
@@quincydrones928 yep some goggles don't need it.
Did they list which goggles will need it and which wont ?
I just got mine today and what an absolute nightmare I had flashing the latest firmware on it, was my own fault though I was using a dodgy USB cable which lost connection to the module just as it was starting the flashing process.
Thought I'd bricked it as it was no longer displaying anything on the screen, but I found a guide on how to put it in bootloader mode and got it flashed, was a pain putting it in bootloader mode, had to jump a pad on the module to ground while holding in the button and then connecting it to USB, and you have to keep the pad bridged through the whole flashing process!!
fu im stuck with a blackscreen and it won't connect to my pc.... do i have litterly bind these spots with a wire touching it the hole proces?
@@cbsflows1041 yes mate, I spent ages messing around trying to sort mine out after it failed to flash, and the only way I got it back up and running again was by shorting the pin to ground while holding the button then plugging USB in, after you plug in you can let go of the button but you must keep the pad shorted to ground through the whole flashing process.
I was really close to just soldering a wire to bridge it but I literally just took the module out of its box and didn't want to be soldering to a brand new module.
It's working really well though, I really like it.
Should have said, I just used metal tweezers to bridge the pad, if you don't mind soldering to it then that would be a lot less hassle in my opinion, trying to hold tweezers to bridge pads while holding down the button and plugging in a USB cable is no fun!
@@Dav2112 hey man! i try so freaking hard like you and it finaly worked in the same way buttttt i had to updated to the oldest version and then the second newest version and least the newest version because if i did directly to the newest version it stay stuck in "preparing update"couldnt hold any longer the bridge XD. but it work and im done with that bridge stupit thing omfg haha. Thanks mate i also dont want it to solder because it was just a few hours new with waranty you know!
@@cbsflows1041 glad you got it working man.
is this 5v mod required for the Fatshark HDO2? Thanks
Does the power mod have to be done on the fatshark hd3s?
I have done the mod but it still needs the adapter .. hd3
Did you do only L1 ?
please help I have hdo I just installed it it works But do I need to use ribbon cable do use the wifi on module PLEASE HELP !
ua-cam.com/video/Qpt-KDVs65s/v-deo.html
This video should help you bro
how about in dji goggles?
How do you turn off beeping sound in module keeps beeping
What was that black bar that rolled across the screen at 13:55 in? I noticed that today also during one of my flights, it kinda startled me. I never noticed anything like that with my last googles.
Yea, not exactly sure, I'm going to have to say it's the 2 antennas fusing together, if you find out let me know
DrainMan FPV I just watched tbs live stream and they said the black bar means that that camera isn’t compatible at the moment and to create a ticket to let them know which camera u have so they can patch it in the next update. I just created a ticket for my runcam nano 2, so I suggest u create a ticket also
Needs steady 6.5-8v! USB adapters don't work
Where did you buy those fatshark skins?
Decalgirl.com
How long did that update take u? Mine has been stuck after the check in start update for like 10min now
There has been multiple people saying that just waited out it will update.
DrainMan FPV how long did your take?
@@djs134 45 seconds
DrainMan FPV yeah my 1yr old windows laptop was taking forever so I tried my 10yr old Mac and took maybe 1 min lol
@@djs134 😂😂
i think you should calibrate at 25mw fyi
How'd you pay for those PCB boards? Money from the ATM machine? 😉
🤣🤣🤣 good one!
How long did your update take? Mine seems long
It only took a minute or so
@@DrainManFPV yeah I got it, thanks dude
jakey Dee FPV how long did yours take? I’m 30 minutes in and I see a check above step 1, start update
@@djs134 once I switched computers about 45 seconds
@@djs134 that's exactly what mine was doing and I can't figure out why
Yo- will it work with my V2 terminators ?
Hmm, I do not know, unfortunately I don't have these goggles. I'm sorry about that
@@DrainManFPV thanks for the response sir... As far as the goggles they work with rapidfire with no issue or extra power mods....
@@endliberalism4305 oh then it should work no problem.
👌
I just got the module today and when i plug it in nothing happen's on TBS AGENT but when I plug in crossfire it come's right up is there something i have to do when i plug it in?
It might be your drivers that are not recognizing it
@@DrainManFPV I thought that to but I got it working I beleive the module had a problem took 6 tries to update firmware after I finally got it to recognize it.
So I don't know what the problem was but I finally got it working.
@@scarfacefpv7822 Hey man, how'd you get the module to show up in Fusion? I have Agent X running on my Macbook and I keep plugging in the Fusion mod but it doesn't show up. It's getting power via the USB connection, just not showing up! Any help would be greatly appreciated!
@@mostcertainlyno I used a different computer I don't know why it wasn't seeing it but I did uninsatall agent x and reinstalled it and I was able to get it working with both computer's I use windows also.
I dig it Drainman, I'm a TBS fanboy and avid crossfire user. But I gotta tell you man, putting on a set of the new DJI goggles for 3 minutes has ruined this hobby for me. I can't even stand to look through my analog stuff now. I'm not a fan of overpriced DJI stuff, but damn bro, our world is changing fast. It's really hard to want to invest in analog anything after seeing it. I know there's a lot of hate videos on it, and probably justified for racers. But for a park flyer like me, I gotta save up for it. Once you look through those ugly looking goggles, it's game over. It's the biggest step I've seen in this hobby in the 2 years I've been along, for sure. If you've tried them, you already know what I mean. If you haven't - DON'T. You're money will be gone.
Dang! That's all exactly what I didn't want to hear haha of course naturally I have a little grudge against it because we don't want DJI taking over our hobby. Sounds like I better not try them because knowing me I'll end up with two of them. I'm really surprised at how everyone adapted to it, all of the manufacturers went ahead and created frames that fit the module etc. Fatshark is my goggle company you know, so once frostbyte drops I'm sure I'll be flying digital too!!
@@DrainManFPV - I'm with you, dji isn't who I want around either - they'll flex their muscle eventually, and that's bad for our hobby. We need competition. I'm a die hard fatshark fan too man, sporting the old hd2's forever now. Just hoping frost byte drops soon, it should be a lot more inexpensive. Keep up the great content, appreciate you.