How to remove fuel distributor KE-Jetronic
Вставка
- Опубліковано 18 лют 2015
- How to replace the KE-jetronic fuel distributor.
Please remeber to be carefull when doing it. This mechanical fuel injection system i very sensitive to adjustments.
The car use in the video is a Mercedes-Benz 190e (w201) from 1988.
If you have any questions, don not be afraid to ask. - Авто та транспорт
Very useful video... thank you for posting !
What size torx bit is needed to remove fd from air metering unit, thanks in advance.
good job
How to adjust the amount of fuel in the fuel distributor when you open it ?
سلام السعيدي Thank you!
The backside of the distributor has black caps, if you remove them there are screws for each fuel line distributor "spray" right under.
But I STRONGLY advise against messing with them since even the slightest adjustment can render the fuel distributor useless. Either by flooding the cylinders, or giving them too little fuel.
It is very hard to adjust them correctly without special equipment.
The reason why I had to change my distributor is because I tried to adjust the old one, and not being able reverse my adjustment.
The fuel return hose or whatever..lmao..
after removing out the fuel diatrubador weust replace it or we can clean it too
you can try to clean it, as long as you're careful.
you can also try to only remove the fuel lines from the distributor and see if there is any shit stucked in their, it might help.
how do you know it's brocken or don't work?
Da0Real0G It can be different signs. The engine wont run properly and you have excluded all other possible causes. Or maybe engine only runs on a few cylinders, one cylinder might be completly dry OR flooded.
The fuel distributor doesnt break easly and should outlast the cars life, but it CAN break. There are cheramic plates inside it which can break, the diaphragm can also break...
must*