Mazda Display Repair Kit 6th gen

Поділитися
Вставка
  • Опубліковано 23 чер 2023
  • Quick Tutorial on replacing the 6th gen center display lens on a Mazda3. Procedures for other vehicle will be similar and this is a easy way to fix ghost touch, spider cracks and other problems your display might have.

КОМЕНТАРІ • 43

  • @2405therow
    @2405therow 2 місяці тому +1

    just did this on a 2017!
    Keep in mind if you have a 2017 6 GT the push button start is a part of the horizontal trim piece removed after opening the glove box. It will by default pull off the trim that covers your gauges(driver side above the steering column) don't panic like I did for a second!!! You got this!!!!!!!
    It goes back on with a little gentle convincing (try sitting on the drivers side to reattach)....you will have to disconnect that wire last and put it back on first. 2017 is slightly different. a couple of more screws and the screen did not pop open so easily.
    Happy with the result though!
    Thank you so much for the video. you saved me like $600 in labor costs for 40 minute job!!

  • @puddleduckist
    @puddleduckist 22 дні тому +4

    If you don't care about the touch screen which isn't used much then u can just unplug the ribbon cable. My 17 mazda 6 was ghost touching but looked perfect. I just unplugged the ribbon cable and it's 💯 % fixed!!! Free of charge!!!

    • @jso726
      @jso726 4 дні тому +1

      I've just did exactly that to my 2 mazda 3s, I figure I never use the touch feature anyway.

  • @toneconsultant
    @toneconsultant 3 місяці тому +2

    Honestly, that was the most detailed video I've seen on this subject. The only question I had was if you disconnect the battery, what else in the car has to be reset and if you have to reset anything, do you need a Mazda code? On a Honda, you'd need the code.

  • @stephenbay9564
    @stephenbay9564 Рік тому +1

    Another great video. I like your style of stepping through the entire procedure. Thanks for this one! And continued good luck with your newborn!

  • @happypenguin719
    @happypenguin719 Місяць тому

    Thank you for the detailed walkthrough. I just finished replacing the display lens on my 2017 Mazda3 and your tutorial laid things out perfectly. The only thing I noticed was that on my old screen there was a rectangular plastic gasket between the lens and the display. Not sure if it should have been placed behind the new display lens but so far my display seems fine w/o it.

  • @MrMattie
    @MrMattie 11 місяців тому +2

    Just the video I needed! Sun burnt my screen and has a dead spot and has ghost touch. Looks exactly like that cars screen.

  • @briannaknoblock9309
    @briannaknoblock9309 2 місяці тому

    So so helpful!!! Been dealing with this on my 2017 Mazda CX-5 and have been desperate to find a solution!!

  • @arydze2
    @arydze2 8 місяців тому

    Thank you. That was very helpful 👍

  • @npolansky9959
    @npolansky9959 3 місяці тому

    Having that exact problem with my 2018 Mazda CX-5. Thanks!!

  • @jackhuff6515
    @jackhuff6515 7 місяців тому

    Very helpful. Thanks so much

  • @microzilla
    @microzilla Рік тому

    Great content! I’m curious if it’s possible to retrofit a larger screen to the 2020 Mazda models

  • @Havanero52
    @Havanero52 Рік тому

    Great video ….. question…. How can I use video in drive is a Mazda CX-30 2022

  • @jesusasisbravo8719
    @jesusasisbravo8719 Рік тому +1

    Please, could you provide the bulletin link?

  • @Shandaniak
    @Shandaniak Рік тому

    Could i bother you for help for diagnosis of my 2016 Mazda 3? I have reverse camera and sensor on it. Whenever i put in reverse, camera show's up together with annoying beeps, but not showing sensor area nor something. I do not have button for parking sensor either. Is it because one of them failed or...? Best guess?

  • @AzizSk91
    @AzizSk91 10 місяців тому

    Before you plugged off the battery, there was a zzz sound. I have the same. what was is that?

  • @xitanul
    @xitanul 6 місяців тому

    Do you know if there's any way to make a 2023 cx-5 ce into a touch screen?

  • @AzizSk91
    @AzizSk91 10 місяців тому

    Do I have to change the display every 4-5 years? It seems like that. Since I have seen many of them have ghost/burn shows!

  • @hectorvilla9531
    @hectorvilla9531 2 місяці тому

    My car has exactly the same problem were can I get that screen it’s the same model and year

  • @Ahmedsaleh-ci4er
    @Ahmedsaleh-ci4er 8 місяців тому

    Hi
    Can you help me for the touch screen it's off if I am driving haw I can enable this
    Thank you

  • @joshymcdaniel9233
    @joshymcdaniel9233 20 днів тому

    2:54 ish what’s the cause of the upside down U shape burned In? Is it caused from sun damage?

  • @homargarcia5779
    @homargarcia5779 21 день тому

    How do you fix the bubbles ?

  • @2405therow
    @2405therow 2 місяці тому

    link to purchase?

  • @jamesfullah8268
    @jamesfullah8268 5 місяців тому +1

    Do you have video for 2017 Mazda 6?

    • @2405therow
      @2405therow 2 місяці тому

      Not needed. Its just about identical. See my comment above!

  • @kdomster9141
    @kdomster9141 Рік тому

    Just use your Mazda knob as much as you can as this screen lens looks very delicate...
    Wonder what is causing it to fail, temps or maybe someone applying too much pressure on the lens using is as touchscreen?

    • @78adro
      @78adro 11 місяців тому

      I only used all the time the knob in my Mazda cx5 2019 and I have the same problem with ghost touch. So this is not too much pressure on the lens. I think the lens has manufacture defect because a lot of people have the same problem and Mazda should fix this for free!

    • @kdomster9141
      @kdomster9141 11 місяців тому

      @@78adro Do you have lot of high temps around you?
      I agree there should be a recall

    • @78adro
      @78adro 11 місяців тому

      @@kdomster9141 I live in Chicago, yes we have hot here sometimes. Recently I have decided to disconnect my phone and now it happened much less. Maybe one time for couple days. I noticed it happened sometimes when I brake and stop the the car, when I am standing in the traffic. It look like vibration from others noisy cars cause that. When is less humidity in the air. I don't understand why mazda didn't make a recall for that?

    • @kdomster9141
      @kdomster9141 11 місяців тому +1

      @@78adro it could be combination of extreme heat and cold in winter repeating for 7 years and that lens is breaking down, regardless it should be made to automotive grade and last more than 7 years .
      Get the kit and replace it , it will cost you around 200 dollars .

  • @amyelsesser8325
    @amyelsesser8325 22 дні тому

    WHAT IS THE PART NUMBER HOW DO I BUY IT?????

  • @mcloud2021
    @mcloud2021 6 місяців тому

    Isnt there a way i could just do without that screen and put a normal stereo in that slot? I dont reslly care about that touchscreen i just want a radio that can play music.

  • @MrMattie
    @MrMattie 11 місяців тому +1

    Are the bubbles just from a peel on the outer part?

    • @homargarcia5779
      @homargarcia5779 21 день тому

      Did you ever find out ?😊

    • @MrMattie
      @MrMattie 21 день тому

      @@homargarcia5779 Replaced mine myself, its just a peal.

    • @homargarcia5779
      @homargarcia5779 21 день тому

      @@MrMattie on the outside ? 🤔

  • @tech-bro-with-more-thoreau
    @tech-bro-with-more-thoreau 18 днів тому

    Great video, but can you explain all the BUBBLES??

    • @CARDIAXPLAYS
      @CARDIAXPLAYS  16 днів тому +1

      the bubbles are a thin film on the screen. like a protective shield like you would find on a new tv. I always leave it on for the customer to take off.

  • @AzizSk91
    @AzizSk91 10 місяців тому

    I have the same code, B108E04 and guess what? They told me I have to change this kit WITH CMU! Which cost me $400 with $200 for screen lens kit!

  • @jesusasisbravo8719
    @jesusasisbravo8719 Рік тому +2

    Here you have the bulletin link static.nhtsa.gov/odi/tsbs/2023/MC-10230870-0001.pdf

  • @AzizSk91
    @AzizSk91 10 місяців тому

    Before you plugged off the battery, there was a zzz sound. I have the same. what was is that?

  • @AzizSk91
    @AzizSk91 10 місяців тому

    Before you plugged off the battery, there was a zzz sound. I have the same. what was is that?