Lol thanks very much . Some get what I do and some don't and sometimes I go overboard a little lol. I do chapters in some vids I will try to do that more often thanks again for the comments glad you enjoy the content 😊
Hey thanks for the comment I am actually doing a little navmap series ua-cam.com/video/RjJi7hiUmZA/v-deo.html here is the 1st video this may answer some questions part 2 is not out yet but soon.
Just answered my own question. Load up simulator, create a simple plan. Point A to point B. Regardless of distance. Save plan within the Load/Save option. You are given the option of saving as .pln. By the way any other .pln's you may have saved within the .flt folder will now all show up. Load and go!! Maybe this will help with anyone else with same question.
Thanks for the comment.. the aircraft need to be downloaded from the github here is a video don't hate its like 1 of my 1st videos but it will show you how to get the info you need ua-cam.com/video/v96vTtvY_1U/v-deo.html
sure check out this video (ITS OLD) please dont hate but skip to 4:50 and there i will explain how to get that info. ua-cam.com/video/v96vTtvY_1U/v-deo.html
@@2020fsers lol soz like If you're unfamiliar with a large airport from the stand to the runway, flight plan, land and taxi to the stand is that not all in the flight plan ?
No it's not . You can choose a start gate but that's all . Then you can select your procedures and waypoints . I am unfamiliar with a stand to runway plan I'm not a pilot and I also don't fly airliners all that often.
For vfr you kind use it the same way but you don't have any vfr stuff on littlenav map so if you are flying to a visual location little navmap isn't it what you need you need a vfr chart. check out skyvector.com to flan your flight there here is a video on how to read a vfr chart hope this helps ua-cam.com/video/zf4v2-L2MU0/v-deo.html
@@2020fsers man you are the best, I just started using Neofly I really like flying small GA aircraft so I’m trying to learn how to fly via far but I usually use ATC and noticed that ATC just kind of points me to the airport and then just leaves me so there are times when I’m like 3000 feet over the airport that I was supposed to land that I need to try to figure out how to implement ATC if that’s possible.
This was informative, but I wonder if you might want to just go ahead and CUT BAAACK just a TAD on the dosage of whatEVERRR it is you’re TAAAAKINGGG! (And tell me where I can get some.)
I've been meaning to ask you -- Are you using the external MCDU function of the A32NX? I've an old 10 inch G Pad lying around. I have repurposed it as a very realistic, touchscreen MCDU. Please let me know your thoughts!
My MSFS does not recognize some waypoints that LNM places in the flight plan. Further, LNM does not load into MSFS and populate the FMU or FMC whatever. I always have to load waypoints manually. The only thing this guy has done different than what i do is he used Airways.
You need to make sure that you load your Scenery data for little nav map that will download all of the waypoints airports ndb's for you to use And they should populate them in Microsoft flights simulator but it's not gonna automatically load. Your flight plan into the f m c every plane is different So downloading a flight plan is going to change depending on what aircraft you're using. But you can upload your flight plan to the Microsoft flights simulator world map. And that will put it in most f m c's for you but not all of them
@@2020fsers no big problem actually. I wrote the comment under the first impression... you made me check the name of the program, I thought I got it wrong myself at first :D
I smashed everything I could. Good stuff going on here in regards to Little Nav Map. Well done. Siskel and Elbert give it 2 thumbs up. 👍👍
Thanks for the comment . Glad you enjoyed it. 😉
Ive always used the bare minumum out of LNM, this makes it all much clearer. thank you for this!
Your welcome thanks for the comment
The energy in this video deymm ❤
Cruising altitudes of 18,000 feet and above uses high airways and you must file and fly IFR, below 18,000 is low airways and can be flown IFR or VFR.
hey thanks for the info really appreciate it!
God that editing style :D It's like montageparodies for how-to videos
Hey there thanks for the comment 😀.
@@2020fsers If your therapist ever lets you edit that video again: Chapters would make it even better, but the content itself if already gold!
Lol thanks very much . Some get what I do and some don't and sometimes I go overboard a little lol. I do chapters in some vids I will try to do that more often thanks again for the comments glad you enjoy the content 😊
Question. How do I find your video on installing LittleNavMap. Also how do I get it, download it. Nothing has worked for me. Thanx
ua-cam.com/video/RjJi7hiUmZA/v-deo.html
This should help
Nice video. Took away all the mystery.
Great thanks for the comment 😀
Very helpful, thank you!
You welcome . I have also done a 2 part updated and more in depth tutorial of little navmap if interested.
Here is part 1
ua-cam.com/video/RjJi7hiUmZA/v-deo.html
Excellent and very informative video. I like using Little Nav Map.
Thank you it is a great tool thanks for watching!
Great tutorial. How do you calculate fuel and can the app accept load/cargo weight parameters?
Hey thanks for the comment I am actually doing a little navmap series ua-cam.com/video/RjJi7hiUmZA/v-deo.html here is the 1st video this may answer some questions part 2 is not out yet but soon.
Just answered my own question. Load up simulator, create a simple plan. Point A to point B. Regardless of distance. Save plan within the Load/Save option. You are given the option of saving as .pln. By the way any other .pln's you may have saved within the .flt folder will now all show up. Load and go!! Maybe this will help with anyone else with same question.
Hey great info thanks for posting sorry I didn't get back sooner.
Do you really need to be clear of airspaces when flying IFR? I thought you don't have to worry about airspace restrictions.
You always need to worry about airspace restrictions. With ifr atc already knows where you are going so you have clearance.
Great video. Learning lots. Thanks. When I try to select a aircraft there are none there to choose :s any ideas ?
Thanks for the comment.. the aircraft need to be downloaded from the github here is a video don't hate its like 1 of my 1st videos but it will show you how to get the info you need ua-cam.com/video/v96vTtvY_1U/v-deo.html
How do I get the aircraft in the performance file. Mine is empty.
sure check out this video (ITS OLD) please dont hate but skip to 4:50 and there i will explain how to get that info. ua-cam.com/video/v96vTtvY_1U/v-deo.html
Many thanks but can it also get me to and from the stands from cold start to shut down?
Thanks for the comment . There is no way to plan a route between stands
@@2020fsers lol soz like If you're unfamiliar with a large airport from the stand to the runway, flight plan, land and taxi to the stand is that not all in the flight plan ?
No it's not . You can choose a start gate but that's all . Then you can select your procedures and waypoints . I am unfamiliar with a stand to runway plan I'm not a pilot and I also don't fly airliners all that often.
Thanks! Very helpful and funny video!
Hey there glad you liked it I try not to be to boring lol 😊 thanks for watching
How can I add airways and terrain to my .pln?
Awesome tutorial, going to help me a lot with my VATSIM flight!!! Thanks.
Very welcome thanks for the comment
Love your tutorial! Thanks 😁
hey glad you enjoyed it thanks for watching
Video could have been done in half the time but keep it up. Useful info 👍🏻😊
Thanks for the comment this is a very old video check out the newer 2part series i did on little navmap.
ua-cam.com/video/RjJi7hiUmZA/v-deo.html part 1.
@@2020fsers Thanks. Will check it out
How can I get this?
It's available for pc I did a tutorial on this 2 parts
ua-cam.com/video/RjJi7hiUmZA/v-deo.html
Great tutorial. I didn't know you could do all this with LNM. Thank you o/
Thanks for that yes LNM is very powerful and thanks for the comment . 😀
these videos are really helpfull!!!! is it possible to make this video for VFR flight plans?
For vfr you kind use it the same way but you don't have any vfr stuff on littlenav map so if you are flying to a visual location little navmap isn't it what you need you need a vfr chart. check out skyvector.com to flan your flight there here is a video on how to read a vfr chart hope this helps ua-cam.com/video/zf4v2-L2MU0/v-deo.html
This may also help ua-cam.com/video/fxUOQ3HK-vI/v-deo.html
Ps sorry for the older videos my audio sucked for my mic please don't let that distract from the content
@@2020fsers man you are the best, I just started using Neofly I really like flying small GA aircraft so I’m trying to learn how to fly via far but I usually use ATC and noticed that ATC just kind of points me to the airport and then just leaves me so there are times when I’m like 3000 feet over the airport that I was supposed to land that I need to try to figure out how to implement ATC if that’s possible.
Need to pick up ifr clearance first before your flight after you have your fpl inserted .thanks again for the compliment ☺️
This was informative, but I wonder if you might want to just go ahead and CUT BAAACK just a TAD on the dosage of whatEVERRR it is you’re TAAAAKINGGG! (And tell me where I can get some.)
Lol 😆 thanks for the comment .
I've been meaning to ask you -- Are you using the external MCDU function of the A32NX? I've an old 10 inch G Pad lying around. I have repurposed it as a very realistic, touchscreen MCDU. Please let me know your thoughts!
Yes when I fly 2d I use the tablet for the mdcu. But now I mostly fly in vr so I don't use it much anymore
You can also use the tablet on the headwind a330 and the cj4 now as well
I export plan to MSFS, and is saved as .pln. But when I start MSFS and go to load plan, only option is .flt. Any ideas?
it should say flt and pln
I can never find links in a description under the video
If you click read more it should open the description up for you to scroll down .
Are you on discord?
No not yet my family is in the process of moving so maybe after that but I do have a Facebook group 2020fs'ers check it out if Interested.
My MSFS does not recognize some waypoints that LNM places in the flight plan. Further, LNM does not load into MSFS and populate the FMU or FMC whatever. I always have to load waypoints manually. The only thing this guy has done different than what i do is he used Airways.
You need to make sure that you load your Scenery data for little nav map that will download all of the waypoints airports ndb's for you to use And they should populate them in Microsoft flights simulator but it's not gonna automatically load. Your flight plan into the f m c every plane is different So downloading a flight plan is going to change depending on what aircraft you're using. But you can upload your flight plan to the Microsoft flights simulator world map. And that will put it in most f m c's for you but not all of them
If You are interested I've done a 2 part tutorial series on little nav map. Here's the link for the 1st video. ua-cam.com/video/RjJi7hiUmZA/v-deo.html
🌟🌟🌟🌟🌟
Thanks Mr bones appreciate it 🙌
its LITTLE NAV MAP without the "S"
Thanks for the comment 😀
Little Navmap not maps... sorry but it's annoying to hear said wrongly so many times :D
Thanks for pointing that out ..
@@2020fsers no big problem actually. I wrote the comment under the first impression... you made me check the name of the program, I thought I got it wrong myself at first :D
2020 is last year
Not sure I get what you are saying 🤔. 2020 is last year
@@2020fsers it's a joke lighten up
Oh lol I'm good it's hard to tell sometimes if someone is just kidding around or being a butt. Lol