I just hate those videos that plod on and on, and tell you things you don't really need to know at the time. Your tutoring was concise and to the point and very well narrated. I learned so much in a small space of time, things I have wanted to understand for a long time now. Thank you very much for your fine effort in producing this video.
Just seen your tutorial and found it very well explained, even my eighty year old brain could take it in. Still a beginner on LNM so not yet understood procedures. Will use you example to familiarise myself. Like the way you explain using the map to create the route will give that a try. Hope you will do more of these basic tutorials! I find G1000 easier to load fligtht plans but need to expand that to other systems. I am hoping that it is possible to get the flight plan to automatically adjust altitude as required and also how to invoke approach(APR).
Little Navmap is an extraordinary application. In this video I found very useful information which is presented in a clear way. A great addition to the somewhat “dry” and huge Little NavMap operating manual. Many thanks!
Excellent tutorial for beginners. Personally, I do flight sim since from the Msoft DOS version. Unfortunately, I have a huge gap between 2013 - 2021 (up to today's days), and now I'm back. Cannot live without Flightsim. However, your step-by-step instruction is a key for those who really want to get into it. Highly can recommend it to everybody who starting now and totally new for flight sim IFR (Instrument Flight Rule). Have fun sim partners!
Thanks for the easy way to understand LNM. I have been struggling until I found your tutorial. I have written up "Bullets" onto a sheet to assist my 80 yr old brain. and finally I'm up up and away. I too, have found some of the MSFS way points a little confusing to locate. But LNM is a wonderful program. Practice makes perfect.
This is really good. I have just been using the program as a live map the whole time. So much more functionality that I never bothered trying to figure out before. Thanks.
Outstanding tutorial. Great job, much appreciated. However, I did a flight plan just as you showed and the first half went well, then MSFS 2020 had a mind of it's own and deviated from the Little Nav Map flight plan to the point where Little Nav Map stopped following as it was so far off of the flight plan. Guess it doesn't have those waypoints in MSFS 2020. It probably skipped about a dozen waypoints then got back onto the LNM plan and finished the flight. The flight was from Rota NAS, Spain to Ramstein AB, Germany. About a 2 1/2 hour flight.
Great tone and pace! Always been a bit .... well avoiding LNM, but I'll give it another chance again... (last time i could not see the airports...any ide why?) Thanks for a great video!!!! =D
Fantastic video, showing each step really helps! I didn't realise how to set Alt, or that it did it? I've been frustrated lately with LNM freezing when I paused FS20, but found that it's best to pause via the menu and not the pause keyboard key?
Super informative tutorial, exactly what I needed :) Can same planning be used for radios only ? I’m planning to fly DC-6 by PMDG in FS2020, old fashioned radios only :) Excellent for my 62 year old brain :) Well done, keep posting more, say advanced navigation using LNM.
Does the ATC usually give you the sid and star when you get your clearance or does a pilot request what sid and star they want based on other flights. I always assumed the ATC gave you whatever procedures they wanted as you gathered your clearance, which seems realistic to me. I'd like to upload it to msfs so the clearance reads it to me but to me it should be a mystery what sid I'm getting then I could plan it with this software after they give the Sid ...?
One problem I have found with the program is that there is no way to load approach transitions, unless I am missing something. You load the STAR, and the approach, but there is never an option for approach transitions. How do you get from the STAR to the approach? Always expect vectors? Go direct to the initial fix and hope there's not a mountain in the way?
Personally I start by making my plan in Skyvector and then I email myself a download for the plan I made then I go in little navmap go to file and import the flight file I made and download!
Hey ! What about selecting your aircraft, is there a list of planes already configured ? I'm thinking of the aircraft data and such. Please help or point me in the right direction. Thanks for sharing, Ronnie
I just hate those videos that plod on and on, and tell you things you don't really need to know at the time. Your tutoring was concise and to the point and very well narrated. I learned so much in a small space of time, things I have wanted to understand for a long time now. Thank you very much for your fine effort in producing this video.
Very clear explanation, especially outlining a good strategy for combining stars with approaches.
Just seen your tutorial and found it very well explained, even my eighty year old brain could take it in. Still a beginner on LNM so not yet understood procedures. Will use you example to familiarise myself. Like the way you explain using the map to create the route will give that a try. Hope you will do more of these basic tutorials! I find G1000 easier to load fligtht plans but need to expand that to other systems. I am hoping that it is possible to get the flight plan to automatically adjust altitude as required and also how to invoke approach(APR).
Little Navmap is an extraordinary application. In this video I found very useful information which is presented in a clear way. A great addition to the somewhat “dry” and huge Little NavMap operating manual. Many thanks!
Excellent tutorial for beginners. Personally, I do flight sim since from the Msoft DOS version. Unfortunately, I have a huge gap between 2013 - 2021 (up to today's days), and now I'm back. Cannot live without Flightsim.
However, your step-by-step instruction is a key for those who really want to get into it. Highly can recommend it to everybody who starting now and totally new for flight sim IFR (Instrument Flight Rule). Have fun sim partners!
Thanks for the easy way to understand LNM. I have been struggling until I found your tutorial. I have written up "Bullets" onto a sheet to assist my 80 yr old brain. and finally I'm up up and away. I too, have found some of the MSFS way points a little confusing to locate. But LNM is a wonderful program. Practice makes perfect.
This is really good. I have just been using the program as a live map the whole time. So much more functionality that I never bothered trying to figure out before. Thanks.
Great way to explain a FP including Sids, Stars and Approach, Many Thanks
Thank you for posting your UA-cam video. It is extremely helpful.
Awesome ! Thabk you, i was looking for one specific puzzlepiece which inhave now found. Have a great day and good flights! o7
Excellent tutorial. I enjoyed it very much!
Just what I was looking for. Thanks 👍
Nice quick tutorial. btw @ 6:19 it's not a waypoint that you delete. It's just speed and altitude information of your flightplan 100 knots 23000 feet.
Great video, straight to the point👍
Very clear and easy to follow steps thank you, subbed
Thank you very much, that was so clear. Have a good 2022
Thanks very much. Explained perfectly.
Awesome. Just what I was looking for.
Outstanding tutorial. Great job, much appreciated. However, I did a flight plan just as you showed and the first half went well, then MSFS 2020 had a mind of it's own and deviated from the Little Nav Map flight plan to the point where Little Nav Map stopped following as it was so far off of the flight plan. Guess it doesn't have those waypoints in MSFS 2020. It probably skipped about a dozen waypoints then got back onto the LNM plan and finished the flight. The flight was from Rota NAS, Spain to Ramstein AB, Germany. About a 2 1/2 hour flight.
Make sure you select the same navdata-cycle in LNM. MSFS for example uses another default cycle than XP-Plane 11... But you can switch inside LNM.
Great tone and pace! Always been a bit .... well avoiding LNM, but I'll give it another chance again... (last time i could not see the airports...any ide why?) Thanks for a great video!!!! =D
Thank you for this video.
Great solutions , thank you so much !
Fantastic video, showing each step really helps! I didn't realise how to set Alt, or that it did it? I've been frustrated lately with LNM freezing when I paused FS20, but found that it's best to pause via the menu and not the pause keyboard key?
Awesome tutorial thanks so much.
Great tutorial!
Super informative tutorial, exactly what I needed :) Can same planning be used for radios only ? I’m planning to fly DC-6 by PMDG in FS2020, old fashioned radios only :) Excellent for my 62 year old brain :) Well done, keep posting more, say advanced navigation using LNM.
Does the ATC usually give you the sid and star when you get your clearance or does a pilot request what sid and star they want based on other flights. I always assumed the ATC gave you whatever procedures they wanted as you gathered your clearance, which seems realistic to me. I'd like to upload it to msfs so the clearance reads it to me but to me it should be a mystery what sid I'm getting then I could plan it with this software after they give the Sid ...?
Thankyou for the lessen you taught me a lot,
One problem I have found with the program is that there is no way to load approach transitions, unless I am missing something. You load the STAR, and the approach, but there is never an option for approach transitions. How do you get from the STAR to the approach? Always expect vectors? Go direct to the initial fix and hope there's not a mountain in the way?
Great Video. Thanks
Personally I start by making my plan in Skyvector and then I email myself a download for the plan I made then I go in little navmap go to file and import the flight file I made and download!
Oh thanks, wow this is a neat program but need a quick plan tutorial
i can't click on ''show departure procedures''.. it's greyed out
where is that weather coming from? is it from the sim?
Hey ! What about selecting your aircraft, is there a list of planes already configured ? I'm thinking of the aircraft data and such. Please help or point me in the right direction. Thanks for sharing, Ronnie
Good