Drive Belt DiY Toyota 2kd-ftv Engine Innova HiLux HiAce Fortuner

Please support our channel:
G-Cash 09297681430
Thank you!
Changing engine drive belt of Toyota Hilux 2kd-ftv engine is easy, this video might help you. Thank you for watching! Please subscribe for more.
#2kd
#serpentine
#drivebelt
Please support this channel, buy me a coffee here:
www.buymeacoff...
Thank you!

[@ToyotaHilux24]

ماشاءالله عليك ❤❤❤❤

[@DiYSpanner]

Same to you

[@bossjo3421]

More 2kd-ftv DIY maintenance please. Change filters, egr manifold throttle body cleaning, change oil and coolant and more. More power.

[@DiYSpanner]

Thanks

[@juniusrienzidelosreyes2522]

Sir asa naka butang ang mga specer?

[@fraserp2377]

Dude made it look easy, you need the forearms of a gorilla to move the tensioner with a tiny spanner like that.

[@DiYSpanner]

Thanks dude

[@ArmandoMassango-k1y]

Qual é a função da poli 2kd

[@buditobil]

Thank's

[@DiYSpanner]

👍👍👍

[@theharbingerofconflation]

Are there no rough timing marks I should look out for?

[@DiYSpanner]

Nothing

[@suntzuwarsword1964]

Thank you sir

[@DiYSpanner]

Thanks too sir

[@arjonjamesdordas6646]

Thankyou po sir

[@DiYSpanner]

👍👍👍thanks too sir

[@jeckpajarillo1480]

Sir same lang ba sa 1kd ftv na engine

[@DiYSpanner]

Same lng sir

[@unkn0wn526]

sir same lang ni sa hilux g 2015?

[@DiYSpanner]

Basta d4d same lng sir

[@daddyjer3044]

Same sa 2015 fortuner ba yan?

[@DiYSpanner]

Same lng sir

[@daddyjer3044]

Salamat

[@reynantegascon4312]

Mga idol inig Kahuman ug ilis sa Timing Belt sa 2KD-FTV Engine unsaon man pag wagtang aning migawas sa Panel Board nga T-TIMING BELT nga sign? Migawas dihang miabot ug 150,000km idol pls answer idol...salamat

[@DiYSpanner]

Kini lang sunda nga instruction sir.
To reset the timing belt indicator:
Turn on the ignition.
Adjust the display so that it is showing the TRIP B reading.
Turn off the ignition.
Press and hold the trip meter button and turn on the ignition.
Continue to hold the trip meter button for 5 seconds or more ensuring that the timing belt warning light is flashing.
Release the trip meter button then within 5 seconds press it once.
You now have 5 seconds to select the interval to the next timing belt change. turn the trip meter button to advance through the interval options.
Note: the interval options will be a two digit number representing the kilometres multiplied by 10,000 eg: 15 = 150,000 Km’s
Or if not changing the interval hold the trip meter button for 5 seconds or more.
The display returns to the Odometer reading and the Timing Belt light will turn off
To reset the Timing Belt reminder message without the Multi Information Screen.
Switch the ignition ON and set the TRIP meter RESET knob (located on the lower right hand side of the cluster) to display the Odometer reading (not the trip meter reading) and then turn the ignition OFF.
Press and hold the TRIP meter RESET knob and turn the ignition ON.
Press and hold the TRIP meter RESET knob for a further 5 seconds, release it and then hold it in again within 5 seconds.
Enter into the SETTING MODE and change to T-BELT DISPLAY MODE.
Press and hold the TRIP meter RESET knob for a further 5 seconds.
The display now changes to TRIP B and the warning light turns off indicating reset procedure is complete.
Release the knob and turn ignition to OFF.

[@reynantegascon4312]

Salamat sir

[@immi-paulahkuoi8639]

Does da kd1 engine use same drive belt as the kd2 engine?

[@DiYSpanner]

Yes sir

[@abhilashmk2279]

A

[@DiYSpanner]

Thanks