Just wanted to say that after watching your video on the front 3.5 infinity speakers, I received front and 4 rear 6x9 infinity speakers. Just installed them today and I have to admit, easy as pie to install, cramped in the front but not bad. But the sound these speakers make is incredible, love them. Thanks for your hard work and effort. PS, putting the door panel back on was a bugger till I figured out to remove the door handle piece, then it slid on nicely.
Was going to take it somewhere to get the speakers done. But watching your video made me just purchase the whole setup and I'll do it myself. And save bunch of money. Thanks!
Just finished replacing all 6 stock speakers with the Infinity's all round, followed you videos and did all 6 in less than an hour. Thanks for doing all the leg work, sorry did I just call an Airborne Trooper a Leg LOL! Great videos Sir, keep up the good work. Changing all the lights over to LEDs this weekend.
Man I ran all infinity kappa in my 05 dodge dually. 4 tweeters,2x 3" for the dash 2x 6"x9" and 2 x 5¼" . I couldn't be happier . Im running a JL 900x 5 amp 100 watts to each door and 500 watts to the 10" JL sub I mounted where my jump seat was then put my center console on top of the sub box . I know people that have spent thousands on their system but mine beats theirs hands down! Great choice!
I've read posts claiming the front door imitation alpine speakers are strictly mid-range speakers & no highs are sent to them via the stock 8.4 head unit. All highs are sent to dash speakers & rear doors. Still haven't found a mid-range only speaker replacement. Adding a 2 way of 3 way speaker in the front doors would be a waste - since the tweeters will never be put to use! Have you heard this
I went with the JBL (Club Series) in dash & rear doors! Then replaced the stock $hitty sub with the shallow mount Pioneer. Sounds decent now. I also adjusted the fade - to send a bit more sound to the rear doors! Front was a bit over powering.
what adaptor..i have a 2021 ram 2500 ..those speekers will not fit.i have 4 plastic pillars around my stock speakers i have jbl 929 tgat i cant use because the bottom rail rubs on magnet.please ley me know what adaptor
Did you happen to notice what ohm the front oem speaker was? Did you notice if the dash speaker was wired to the headunit seperately or in parallel with the front door speaker? Finally did you notice any volume/power decrease?
Do you plan on putting a sub in? I picked up a leftover 2018 2500 tradesman a couple of weeks ago and I miss having bass lol. Anyways, glad I found your channel. It’s been very helpful and you’ve given me some good ideas for upgrades!
Currently own 2018 Laramie mega cab. Has the Alpine 10 speaker system. Looking for the info you researched for the JL's, Please. Ultimately want to change out all factory drivers including stock woofer (want to keep stock enclosure). Any research info you could send would be greatly appreciated. Thank you
Interested in the upgrade but what mainly pisses me off is how the stock speakers are loud for 30 seconds. Did you loudness improve at all without adding an amp ?
Yes sir, you got it. I bought 2 sets because of how impressed I was with the quality. amzn.to/2BemSW8. Both sets were installed in the front doors and rear.
Ok, bought some new pioneer 6x9 four way speakers for my ram to replace Alpine stock system. I did the dash speakers, tons of treble, sounds great. However, I replaced front door 6x9 and it sounds like crap, no treble whatsoever, only bass. Do you know what’s wrong?
@@SuperJam2001 yep, found that out. Put my old speakers back in. Replaced everything else. Sounds pretty good. Too bad front doors weren't full range though.
Sounds like it, but I would look at your speakers to see the quality of them. More than likely the ones that I just installed will be an upgrade for you too
It's personal preference but I spent a good 10 minutes listening to songs and adjusting the 3 different variables to my liking. I'm more of a heavier bass guy to treble with a stronger hint of mid to compliment the treble!
So I just ordered these speakers .. they came in today . I previously ordered JBL GTO 939 and they definitely dont fit Ram front doors . Was there anything u did extra to fit these infinity 9623ix in the doors of the front?
Question, I installed the same set up as you in my 2018 Ram 1500 with the stock system without the alpine system and noticed sometimes when I start my truck remotely the driver side speakers don't work. the next morning I go out and start the truck and they all work again. did you happen to have any issues like this?
Hey man, you mentioned an adapter/spaced that goes in behind the speaker. Is this something that came with the new speakers or did you have to buy this separate? I don't notice it listed in your parts list. Thanks!
Are you getting full sound from the front speakers? I'm reading everywhere the front speakers are wired for only mid range and bass, so that installing a full range speaker would be pointless, is that true?
Honestly, that makes sense. But you won’t even notice the difference really. Either way the new speakers slap and make every essence of music better in this cab!
bought these speakers this year a few months ago for $62. Went to buy the ones for the back today and they jumped to $160. They are discontinued and the replacements are $112. Price gouging at its finest.
Hey brotha love the set up, how is the bass on these? I love more mid and lows. Still love highs, just not as cranked up. Going for a crisp sound, nothing that screams or is annoying. Really considering these and I Already priced them on amazon.
@@MotorHead18 is the bass good? I got jl 6x9 speakers installed that don't fit properly. The audio store said they will replace them for free but they are pushing me towards kenwood... Thanks brother
Did you have any issues with the automatic noise reduction that is in the Ram? I noticed at high volume it gets to a point where it does not get any louder and maybe the sound is reduced. I noticed Crutchfield has connector to disable the Noise reduction mics. I just haven’t found the location where to plug it in.
Did you notice the speaker touches the door cover with the new speakers? Mine is bulging in the middle. I can feel it raised where the plastic mesh is.
@@MotorHead18 for sure maybe I need to take a look again and make sure it is screwed in all the way. No rattle but I can feel the gold piece, tweeter maybe, on the plastic part of the door being pushed out.
hey bro it's been a year how are the speakers holding up? I was thinking about upgrading to those in my 3500 I know they are pretty clear but is the bass legit?
Hey man, thanks for the ideas on the Inifinity's! I'm looking at doing a similar setup myself. I noticed the speakers you used are actually rated at 3 ohms impedance (resistance) vs the 4 ohms the factory speakers were (and other brands have options at that level). Typically when the speaker has less impedence, it means less resistance and therefore pulls more power out of the Amp/Head Unit; which can cause added heat if it wasn't designed for it. I know the Alpine setup uses 2 Ohm speakers but I think that's driven off an added amp. Have you had any issues running the lower impedence in your truck? The stereo still works great a year or so later? I like the looks and specs of these infinitys but just a tiny bit concerned the drop in impedence might make the factory deck "work too hard" causing issues... Thanks, great channel btw!
Unfortunately this was a waste of time. You indicated the button on the speaker but didn't elaborate as to what they are for. You mentioned about a spacer didn't elaborate what type of spacers unlike you have the part number for the adapter. If you going to do an instructional video provide some instructions while recording instead of editing out what you actually have to do....
He said in the video that the button is for the decibles ,depressed for +0 and pressed is +3 and he said the spacers come with the speakers .and the adapters are metra 72-6514 which are in the description.
I saw the thumbnail and thought you were AJ Castillo
Lol he looks like me hah
Just wanted to say that after watching your video on the front 3.5 infinity speakers, I received front and 4 rear 6x9 infinity speakers. Just installed them today and I have to admit, easy as pie to install, cramped in the front but not bad. But the sound these speakers make is incredible, love them. Thanks for your hard work and effort.
PS, putting the door panel back on was a bugger till I figured out to remove the door handle piece, then it slid on nicely.
Nice! Easy process with great gain!
Hey I got these speakers but in front the tweeter on speakers don't sound but in back sound good
Link for the spacer adapter
Link for the spacer adapter?
Was going to take it somewhere to get the speakers done. But watching your video made me just purchase the whole setup and I'll do it myself. And save bunch of money. Thanks!
Nice! Let me know how it goes for you.
Just finished replacing all 6 stock speakers with the Infinity's all round, followed you videos and did all 6 in less than an hour. Thanks for doing all the leg work, sorry did I just call an Airborne Trooper a Leg LOL! Great videos Sir, keep up the good work. Changing all the lights over to LEDs this weekend.
hahaha LEG! Nice one, glad it all worked out.
How many watts are these
Hey Ross, link in the description
Man I ran all infinity kappa in my 05 dodge dually. 4 tweeters,2x 3" for the dash 2x 6"x9" and 2 x 5¼" . I couldn't be happier . Im running a JL 900x 5 amp 100 watts to each door and 500 watts to the 10" JL sub I mounted where my jump seat was then put my center console on top of the sub box . I know people that have spent thousands on their system but mine beats theirs hands down! Great choice!
Oh yeah, solid products brother
"Soundproofing" foam absolutely needs to be solid all the way around. Just putting it at mounting points is creating spaces that can vibrate!
Thanks for the insight!
I've read posts claiming the front door imitation alpine speakers are strictly mid-range speakers & no highs are sent to them via the stock 8.4 head unit. All highs are sent to dash speakers & rear doors. Still haven't found a mid-range only speaker replacement. Adding a 2 way of 3 way speaker in the front doors would be a waste - since the tweeters will never be put to use! Have you heard this
I went with the JBL (Club Series) in dash & rear doors! Then replaced the stock $hitty sub with the shallow mount Pioneer. Sounds decent now. I also adjusted the fade - to send a bit more sound to the rear doors! Front was a bit over powering.
Kix Forrest I heard it today on my Ram 2014 Alpine installed 6x9 just Mid no highs. Have to put a Amp for highs to.
Nope, haven't heard!
Thx for the insight!
Thx!
You said "Spacer I mentioned earlier". I never heard anything about a spacer. Where do I get the spacer ??
Came with the speakers!
What adapters did you use ?? Thanks
They came with the speakers
Ok thank you ..
@@mattpihs7602 no problem!
Where did you get the speaker spacer from? Doing the same setup but clutch field didn’t have anything of the sort. Thank you.
Spacer was included with the speakers
@@MotorHead18 sweet I ordered the same kit for the single cab. Thanks again Brotha 🤙🏻
Did the speakers come with the spacer or did you buy them separately
Came with
what adaptor..i have a 2021 ram 2500 ..those speekers will not fit.i have 4 plastic pillars around my stock speakers i have jbl 929 tgat i cant use because the bottom rail rubs on magnet.please ley me know what adaptor
Your truck is 5th gen chief
How did your door panel fit after installing these speakers. There's not much depth in the front door speaker well.
Fit just fine!
@@MotorHead18 I have to return the Pioneers I bought because they're too deep. Looks like I know what to buy now, thanks bro.
@@room2three7 damn.
Did you happen to notice what ohm the front oem speaker was? Did you notice if the dash speaker was wired to the headunit seperately or in parallel with the front door speaker? Finally did you notice any volume/power decrease?
Nope, didn't notice.
Do you plan on putting a sub in? I picked up a leftover 2018 2500 tradesman a couple of weeks ago and I miss having bass lol. Anyways, glad I found your channel. It’s been very helpful and you’ve given me some good ideas for upgrades!
No doubt! I have a sub and an amp that I'll wire in for sure! I need my bass lol
Have you had any issues with running those 6x9s???
Nope
Do you disconnect battery while doing this or is that not necessary
Not necessary
Did you have an alpine system before? I wanna know if these would be better than my alpine 10 speaker system!!’
Romana Moncevais no I had the cheapo factory ones, but the alpines are okay at the most
so infinity fits ok in front
Yessir
Will the 9633ix fit front they sent me those instead of 9621ix
Why don't the tweeters work in front door new speakers but back sound good
@@dewaynedejean4495 recheck witing
* wiring
did that spacer come with the speakers?
Sure did. Can't go wrong with the infinitys!
@@MotorHead18 awesome, thanks
Np CJR!
Currently own 2018 Laramie mega cab. Has the Alpine 10 speaker system. Looking for the info you researched for the JL's, Please. Ultimately want to change out all factory drivers including stock woofer (want to keep stock enclosure). Any research info you could send would be greatly appreciated. Thank you
The JLs I was able to find are pretty expensive, Dennis. Let me know if you would like the link.
did you have to use a amp for them?
Nope!
Does Rockford have a good speaker for dash front door and rear door ? Minimum modifications ?
Last time I checked, they do. I would say minimum modifications as well!
Interested in the upgrade but what mainly pisses me off is how the stock speakers are loud for 30 seconds. Did you loudness improve at all without adding an amp ?
Better and cleaner music for sure. It was always loud enough for me haha.
Hey are the speakers in the rear the same as the front interested in purchasing them but just wanna make sure you know
Yes sir, you got it. I bought 2 sets because of how impressed I was with the quality. amzn.to/2BemSW8. Both sets were installed in the front doors and rear.
Hey man will you be putting in subs and an amp? Looking to do the same sound system as you!
I have a 10 inch sub and amp that I may try and install!
MOTOR HEAD Alright Nice! Make a video if you do get around to installing those. Would love to see it
In you video you mention a button next to the tweeters (0 decimals and + 3 decimals) which did you go with to get the best sound? Thanks
I went with +3, and I like it. Small difference but more bang for my buck lol.
Will that wiring harness work for the dash speakers as well?
No that is a different harness
Do you have an updated link to all the speakers you installed?? Can't find them on Amazon
amzn.to/2BemSW8
amzn.to/2CoMznh for the harness.
MOTOR HEAD thanks!! Those are for the front and back correct? Have any small ones for the front dash? My amazon search skills are crap
Do you need spacer or you just chose to use them? Also if so does the speakers come with the spacer?
Didn’t need it but I used it anyways. Spacers came with the infinity’s!
Where did u get the speaker spacers can u send me the link I need them for 2500 to get those speakers
They came with the speakers
@@MotorHead18 oh ok thank u did u use the same wiring connections for the tweeters as well im ordering everything right now lol
@@irose1999 I have a dash speaker video, check it out!
Do u run an amp and aftermarket stereo or jist a stock stereo
@@irose1999 stock stereo only
What seat covers do you have. Like em!
AutoZone especial!
Ok, bought some new pioneer 6x9 four way speakers for my ram to replace Alpine stock system. I did the dash speakers, tons of treble, sounds great. However, I replaced front door 6x9 and it sounds like crap, no treble whatsoever, only bass. Do you know what’s wrong?
Is there a button you can press on them to adjust to some more mid? Change your settings through your radio.
The factory amp on the Alpine system only allows bass to front speakers. The rear speakers are full range though.
@@SuperJam2001 thx for the insight!
@@SuperJam2001 yep, found that out. Put my old speakers back in. Replaced everything else. Sounds pretty good. Too bad front doors weren't full range though.
Hey bro do you happen to know if the Laramie trucks with the upgraded Infiniti sound system, is that still an upgrade over what comes oem?
Sounds like it, but I would look at your speakers to see the quality of them. More than likely the ones that I just installed will be an upgrade for you too
For the front doors, do you need that spacer you used? Have a link for that anyways?
You may be able to get by without using the spacer. Spacers came with the speaker set. Still Loving my infinity's!
@@MotorHead18 okay, I'm glad it comes with it then, that's one less thing to worry about. Looking at the Infinity KAPPA series. But not sure yet
@@kuningmuda Infinity is great bro! You won't regret it.
Did you have to add a spacer to the front door? if so were custom fab? or off the shelf spacers?
Nope, I didn’t install the spacer that comes with the speakers! 🔊
What size spacer is it ? 1inch or half inch ?
Hey man, thanks for the videos. Love the infinity speakers. Playing around with the balance but was wondering what levels you go with or recommend?
It's personal preference but I spent a good 10 minutes listening to songs and adjusting the 3 different variables to my liking. I'm more of a heavier bass guy to treble with a stronger hint of mid to compliment the treble!
Which dash speakers did you go with and did you use the same Metra harness as the door speakers?
ua-cam.com/video/Zm1bcUDiRag/v-deo.html
Infinity's, watch the below link!
Are you running a factory head unit? I have an REN in my 09' 1500, non-alpine/kicker 6-speaker setup. How would these sound?
Yeah, still running factory head unit. The speakers sound cleaner, better music experience now.
Just installed these speakers in my dodge ram. Do you have the +3db buttons pressed in on all 4 door speakers? Trying to decide what to do on that.
I didn't notice the button until I stalling the rear speakers lol...But yes, absolutely I pressed the button on the rears haha.
@@MotorHead18 Woah now, i just did this install this afternoon (big thanks for the videos) where is this button at? Thanks
Look closely!
So I just ordered these speakers .. they came in today . I previously ordered JBL GTO 939 and they definitely dont fit Ram front doors . Was there anything u did extra to fit these infinity 9623ix in the doors of the front?
Nothing extra, just what I did in the video!
Ok , thank u
@@coolgray23 No problem Rob!
Question, I installed the same set up as you in my 2018 Ram 1500 with the stock system without the alpine system and noticed sometimes when I start my truck remotely the driver side speakers don't work. the next morning I go out and start the truck and they all work again. did you happen to have any issues like this?
Nope, not at all. I would go back in and make sure the connectors are pressed in all the way.
Hey man, you mentioned an adapter/spaced that goes in behind the speaker. Is this something that came with the new speakers or did you have to buy this separate? I don't notice it listed in your parts list. Thanks!
The optional spacers come with the speakers!
@@MotorHead18 Awesome! Thanks man. Just picked up my 2019 1500 and going to upgrade the speakers too.
How thick are the spacers?
Are you getting full sound from the front speakers? I'm reading everywhere the front speakers are wired for only mid range and bass, so that installing a full range speaker would be pointless, is that true?
Honestly, that makes sense. But you won’t even notice the difference really. Either way the new speakers slap and make every essence of music better in this cab!
bought these speakers this year a few months ago for $62. Went to buy the ones for the back today and they jumped to $160. They are discontinued and the replacements are $112. Price gouging at its finest.
Jeez!
Hey brotha love the set up, how is the bass on these? I love more mid and lows. Still love highs, just not as cranked up. Going for a crisp sound, nothing that screams or is annoying. Really considering these and I Already priced them on amazon.
Yeah bro, I think you will definitely be happy with these! They are crisp, but with not crazy highs.
Just subscribed to the channel- good content. Buying the exact same truck next week. Did you upgrade the head unit?
Not yet Tim, but in the future I plan on upgrading to the larger uconnect head unit!
@@MotorHead18 which head unit you have now? I've got the basic one, no navigation. Simple plug n play on the deluxe version?
@@03redrubi I have the 5" screen.
What size are they??
6x9!
@@MotorHead18 is the bass good? I got jl 6x9 speakers installed that don't fit properly. The audio store said they will replace them for free but they are pushing me towards kenwood... Thanks brother
@@coreyepperson6978 bass is noticeably better bro. The ones I recommended we're great and fit our trucks.
Did you have any issues with the automatic noise reduction that is in the Ram? I noticed at high volume it gets to a point where it does not get any louder and maybe the sound is reduced. I noticed Crutchfield has connector to disable the Noise reduction mics. I just haven’t found the location where to plug it in.
Nope, didn't have any issues. Honestly, I appreciate the automatic noise reduction.
Hey bro. Quick question. What size spacer did you use? 1/2'' or 1"
1/2".
Did you notice the speaker touches the door cover with the new speakers? Mine is bulging in the middle. I can feel it raised where the plastic mesh is.
@@KB-yj2ck Nope, no touchy touchy here.
@@MotorHead18 for sure maybe I need to take a look again and make sure it is screwed in all the way. No rattle but I can feel the gold piece, tweeter maybe, on the plastic part of the door being pushed out.
k b mine bulges too. Have you noticed anything wrong and does it still sound good?
hey bro it's been a year how are the speakers holding up? I was thinking about upgrading to those in my 3500 I know they are pretty clear but is the bass legit?
Nick Warren Can’t go wrong with them!
Indeed!!!
Hey man, thanks for the ideas on the Inifinity's! I'm looking at doing a similar setup myself. I noticed the speakers you used are actually rated at 3 ohms impedance (resistance) vs the 4 ohms the factory speakers were (and other brands have options at that level). Typically when the speaker has less impedence, it means less resistance and therefore pulls more power out of the Amp/Head Unit; which can cause added heat if it wasn't designed for it. I know the Alpine setup uses 2 Ohm speakers but I think that's driven off an added amp. Have you had any issues running the lower impedence in your truck? The stereo still works great a year or so later? I like the looks and specs of these infinitys but just a tiny bit concerned the drop in impedence might make the factory deck "work too hard" causing issues... Thanks, great channel btw!
Thanks a lot brother!
The black screws didn’t work for me in the rear. They were too long. Do they work in the front? Or did you drill the hole?
I used the factory screws and no spacer for the rear. For the fronts I used the black ones with the spacer that came with the speaker!
On your install of these on the rear, I went with them all around at the same time. I like the sound quality.
I agree brother!
Did you use a aftermarket amplifire or just upgrade the speaker with stock amp?
Just upgraded the stock speakers. No change to the head unit or adding an amp.
Unfortunately this was a waste of time. You indicated the button on the speaker but didn't elaborate as to what they are for.
You mentioned about a spacer didn't elaborate what type of spacers unlike you have the part number for the adapter.
If you going to do an instructional video provide some instructions while recording instead of editing out what you actually have to do....
Hell yeah bro!
He said in the video that the button is for the decibles ,depressed for +0 and pressed is +3 and he said the spacers come with the speakers .and the adapters are metra 72-6514 which are in the description.
@@Istaytatted
Always a hater