You legit saved me. I couldn't get it off for the life of me. I even tried those stupid oil filter plyers and nothing. This worked like a charm. Thank you soooo much
Bro if you can’t get that filter off with filter pliers then you should try trying harder, it literally takes more effort to hammer a short driver into it and then try to break loose something that was already stuck, with no leverage. Work smarter not harder
Been there done that the can sheered off the top! I then had to grab channel locks and almost messed up the oil pan and threads because of it! This is not the way to do it ever!
@justsomerando8206 it almost messed mine up as the shop that had changed the oil prior to me owning the vehicle didn't lube the gasket, it sat more than it drove for a decade and was put on with an air gun. I quit getting oil changes at a shop unless I have to and I'm on Vaca because of that. This method would work if it had been hand tightened and seized, but not if a shop did what they did to my old ride.
@@katelynbarrysmith2489 yea i had issues with shops doing that too. Once they torqued my wheel lug nuts on so tight, i had to use a mallet and long wrench to get them off. What jerks
Thanks bro ngl I was about to give up cause of the pliers n the thing I bought from Walmart that supposedly works but slips off never thought abt a hammer n flathead It worked smooth
@@kentrnh If you watch your video you still show the shitty way to remove the filter. You loosened it but then you couldn't get the screwdriver out and then you like turned off the video
Get the oil wrench pliers.. much easier to remove. For best results make sure to change ur oil on time or else the filter gets overheated and sticks on
Tried this awhile back and it did not work the screwdriver ended up turning through the oil filter. I had to remove the whole assembly and order a new one. I swear they fucking welded it on 😡😡😡
I might have to do this next next weekend although it’s negative whatever in Colorado right now so maybe that’s why my oil filters not coming off today so I might have to do this next weekend when it’s supposed to be 40.
This works if you’re super careful, desperate, and in a pinch but JC yall just buy the CTA oil wrench you use with a socket wrench. It’s a few dollars more and it’ll be a friend for life! 😊
I guess you can do whatever you want it’s your vehicle. But how cheap it is to buy a oil filter remover from say Harbor Freight’s why take a chance on causing damage to the oil pan. They also make metal cap that fits over the filter and use your half inch drive to remove the filter. I get it. use what you have when you’re in a pinch. Not saying you’re wrong just another way to remove it. Best of luck to you
Old news, but eh guess for the ones that finally start changing their own engine oil instead of the shop with their overpriced services for what not to do. Just go and buy the proper tools, it won’t cost you a fortune and saves you time. Buy once, cry once
Jesus Christ...there really are a lot of stupid people out there. 1st, for not thinking about getting leverage to turn a smooth ,soft metal, slippery cylinder shape by using a bar through the middle to get it off. And 2.....for thinking its "an amazing idea". Get a filter wrench people...or at least 2wrenches and some rope/tow strap/or an old belt and twist😂😂😂😂
NOOOOO! Don't ever do this! That screw driver will go right through your upper oil pan, and you will cost yourself lots of money. Just use the right tool!
You legit saved me. I couldn't get it off for the life of me. I even tried those stupid oil filter plyers and nothing. This worked like a charm. Thank you soooo much
Dude literally same I went to oreilys to buy filter pliers and they didn’t work then I tried this and got it off instantly
Bro if you can’t get that filter off with filter pliers then you should try trying harder, it literally takes more effort to hammer a short driver into it and then try to break loose something that was already stuck, with no leverage. Work smarter not harder
@@darrellholloway5756shit doesn’t work sometimes buddy relax
History say he ended the video after he realized the screwdriver was stuck 😂
Lol 😂 I noticed that too
This comment made my day! I thought the same thing but it's still a super helpful video.
@@DigitalMagicStudios thanks and yahhh it's super helpful
Lmao my guess is he put a sawzall to it cut it out 😂
He ended the video when he realized his screwdriver also got stuck
Hahaha right
Hammer until u knock a hole into the oil pan behind it and now you can drain your oil twice as fast ! Now that’s efficiency
Been there done that the can sheered off the top! I then had to grab channel locks and almost messed up the oil pan and threads because of it! This is not the way to do it ever!
Worked for me
@justsomerando8206 it almost messed mine up as the shop that had changed the oil prior to me owning the vehicle didn't lube the gasket, it sat more than it drove for a decade and was put on with an air gun.
I quit getting oil changes at a shop unless I have to and I'm on Vaca because of that. This method would work if it had been hand tightened and seized, but not if a shop did what they did to my old ride.
@@katelynbarrysmith2489 yea i had issues with shops doing that too. Once they torqued my wheel lug nuts on so tight, i had to use a mallet and long wrench to get them off. What jerks
@justsomerando8206 I've seen those too! Even with a 10 foot bar on mine I sheered off 2 bolts.
I’m telling ya man that a good way to rip that can in half then your sitting there cussing and mad having to get it off the stupid way.
Thanks dude, worked for me!
I tried that today and uhh well I actually ended up destroying the entire filter and it ripped it half.
currently me, how you get it off ?
Well it sure did save me in a pinch! Just try to anticipate where screwdriver will land before having to readjust.
Thanks!! It worked!! I was getting very worried.
You can squeeze channel locks onto it. Don’t forget to put oil on the rim before you put the new one.
I tried it today I was dealing with a stuck oil filter watched your video and it worked thanks I appreciate the vid 😊 two thumbs ups
Guys I work with over tighten filters all the time so I started installing with a breaker bar. FTNG!
Listen to this guy and you're going to wind up pounding your screwdriver right through your oil pan
Thank you so much bro.
Thanks a lot for sharing this. I tried it and it worked!! Thanks again
Thanks bro ngl I was about to give up cause of the pliers n the thing I bought from Walmart that supposedly works but slips off never thought abt a hammer n flathead It worked smooth
Worked; but had to shank it a couple times because of the little space I had but eventually it came off; saved me a trip to the store; thank You!
Glad it helped
did this, real hack for a last resort removal without proper tools
Lol the moment he realized he couldn’t spin the filter anymore because of the screwdriver is priceless
And that he couldn't remove the screwdriver without tightening it back
I got the filter removed lol
@@kentrnh If you watch your video you still show the shitty way to remove the filter. You loosened it but then you couldn't get the screwdriver out and then you like turned off the video
@@kentrnh and you know if you drive that screwdriver in too high you're going to screw up the threads, you didn't tell anyone that
We in crocs and we get shit done 🙏
That worked. Thanks man
I use a g-clamp tighten it down then twist , flattens part of the filter but you are not going to re use the filet so it’s fine
Get the oil wrench pliers.. much easier to remove. For best results make sure to change ur oil on time or else the filter gets overheated and sticks on
Tried this awhile back and it did not work the screwdriver ended up turning through the oil filter. I had to remove the whole assembly and order a new one. I swear they fucking welded it on 😡😡😡
I might have to do this next next weekend although it’s negative whatever in Colorado right now so maybe that’s why my oil filters not coming off today so I might have to do this next weekend when it’s supposed to be 40.
Try it by hand first obviously
Thank you!!!
A rubber strap wrench is the best tool I've used to remove tight filters.
Or buy a $5 tool to remove it. I seen someone do this with a screwdriver, now they are paying thousands to replace a punctured oil pan!
How on earth do you puncture your oil pan
I did it but on motorcycle but the other end of the flat head took chunk of metal from the engine
That'll work, but be sure that you don't damage anything in the vicinity of the filter.
Awesome..its work well 👍👍👍
Beat tool is a pair of channel lock pliers no mess
this wont work for most ppl.. this will just tear the filter apart if its really stuck! dont try this lol just buy the proper wrench
You don’t need the filter. It’s being replaced
Yea what if that doesn’t work?
This works if you’re super careful, desperate, and in a pinch but JC yall just buy the CTA oil wrench you use with a socket wrench. It’s a few dollars more and it’ll be a friend for life! 😊
I guess you can do whatever you want it’s your vehicle. But how cheap it is to buy a oil filter remover from say Harbor Freight’s why take a chance on causing damage to the oil pan. They also make metal cap that fits over the filter and use your half inch drive to remove the filter. I get it. use what you have when you’re in a pinch. Not saying you’re wrong just another way to remove it. Best of luck to you
Cool comment!
Mine still dosnt move hahahaha
The next video will be him drilling a hole in the radiator support to get the screwdriver 🪛 out.
That would work great if you have the room. Unfortunately this won't work on about 90% of vehicles.
I learn that from my uncle , about 40 year's ago , i'm 54.....PR
It was previously done by jiffy lube. Those dudes tight the crap out of filters
This is a brilliant idea. But my stuck and mangled oil filter is made of hard plastic, not metal!!!
Tried a strap wrench 🔧 ?
Im watching this video on Christmas eve when all stores are closed
Done it this way all my life but, I prefer a wrench tht only works half the time
The best way ever
If this works the filter wasn't that stuck. You will stop doing this the day the screwdriver rips the filter apart completely fucking you!
Ty
Is your video mirrored? Cause your going clock wise
Just be careful not to hammer it through the oil pan too
Until you tear your filter and it's stuck on the vehicle that you can't drive
Mine was so stuck all it did was rip in half
Of course Valvoline did it they tighten oil filters with the force of god, coming from a former Ford tech who’s taken off May valvoline filters
😂😂nice
Saved my ass
Working with a ring on scares me
They sell oil filter sockets so you don't have to do dumb shit like this. You can even rent them if you don't plan to keep it. They're less than $20.
An oil filter wrench is less than 10 dollars
Didn’t work and now it’s mangled
Old news, but eh guess for the ones that finally start changing their own engine oil instead of the shop with their overpriced services for what not to do.
Just go and buy the proper tools, it won’t cost you a fortune and saves you time.
Buy once, cry once
Or you can spend 5 bucks at Walmart and get an oil filter wrench.
Funny, done it. Not always a great idea
Do not do that I saw a guy puncture the bottom of his motor
If you get one that is really stuck , this wont do it .
Jesus Christ...there really are a lot of stupid people out there. 1st, for not thinking about getting leverage to turn a smooth ,soft metal, slippery cylinder shape by using a bar through the middle to get it off.
And 2.....for thinking its "an amazing idea".
Get a filter wrench people...or at least 2wrenches and some rope/tow strap/or an old belt and twist😂😂😂😂
I use my belt..
Or you can use the tool made for that smh
NOOOOO! Don't ever do this! That screw driver will go right through your upper oil pan, and you will cost yourself lots of money. Just use the right tool!
Oiy filter😂😂😂
I've never had to that because I'm strong as fuck
Those crocks tho