Smokey Honda ATC200S, Piston, Jug Replacement, Engine Timing!
Вставка
- Опубліковано 10 вер 2024
- Smokey Honda ATC200S, Piston, Jug Replacement, Engine Timing! 1985 Honda ATC200S, 1985 ATC200S, Honda 200S, Honda ATC, 200S, ATC, ATV, ATC engine rebuild, ATV engine rebuild, 200S engine, 200S motor, ATC repair, ATV repair, ATC Motror repair, ATV motor repair, Harvey Spooner, Hoarding Mayhem, 3_8_2019
Awesome lesson Harvey cant wait so see it bolted up. I literally can't get enough of these kind of videos.
cool... i always change the value guides too while its apart
Nice job Harvey that really long 10 mm bolt that really sucks when you forget to put that thing in and you have to pull out the cam again.😂
Aaron Martin TV that literally just happened to me the other day. I was so mad at myself
Hahaha I forgot to put that bolt by the cam in after I had my whole motor back in the frame! I learned the hard way
Agreed. If this was your only bike you might get a wee bit more thorough with the refresh but in your case its not like your in short supply so not smoking is better than smoking and fixed is fixed
I gotta do a top end job on my atc200s. It's burning oil and has timing chain noise. Do you have a video showing how the timing chain guides go together?
Hey Harvey my 200x is missing the bolt that holds the cylinder down that goes right under the timing cdi advancer can you tell me what size it is?
How to adjust the timing my timing chain is my timing is out and I can't figure it out
Hey Harvey I picked up a 88 Honda fourtrax 200sx and I found out the stator cover was busted so I took it off welded it up nice and put it back on with a new gasket changed the oil and all that but now that I got it all back toghere it runs and pulls over but if you give it a little gas while pulling it rips the cord out of your hand like it has to much compression any ideas things dangerous when it pulls back lol
No way, you can't wrap up the series yet! We wanna hear it run!
Can you please show you actually timing the motor and installing the cam.
Nope, he explains everything over and over and works with 1 hand holding the camera with the other. Never will generally ever...set it down pointed at the arena where he could show you the steps, or a camera head strap.. anything allowing 2 hands and thorough steps is pretty much out 😆. But he'll explain everything with 1 hand holding and the other touching everything, again and again.. you'll get it eventually... maybe..😆
You indicated that the piston should not have any movement once installed on the crankshaft. It should have some left to right movement as the piston slides on the wristpin, correct?
will worn valve stems cause smoking
Aww but we want a cold start..😥
How does a pull start kick back on you ?
You know your stuff brother 😀
What did you use to compress the rings to reistall piston into the bore?
How important is that bolt under the camshaft? 😂
Hi Harvey. Do you know what mm size piston ring these atc 185 take? Thanks!!!!
Neaver place ring gaps towards front or back of piston,it gouges sleeve
Just fyi, they move around as the engine runs. It doesn’t matter where you put the gaps at all
This is very cool. Love it. Thanks but I have a little question. When one measures the pistons where do we measure at with the mic?
Also on my little boys Honda XR50 motorcycle his pet cock is leaking. I’m thinking the seal is bad but they list several different sizes on eBay. How do I mic it to see what size I have? Thanks for helping if you can.
Why the hell didn’t you show us the piston head install?
Mike, I'm sorry!!! Will be more complete next time I work on an engine!!! Thanks for Ur thoughts, watching, and commenting!!!
Fingers crossed 🤞 start on first try ! Harvey I might be coming out to New York in the middle of July and was wondering if there is something you might want or need or would like to trade for ? If so give me a wish list and I’ll see what I can get together from here that you might want .
Coming again I'm in ny and always looking for.atc's
Didn’t show how to put piston in -_-
Hi Harvey, thanks from South Africa for another ATC Video! I have been using your videos as a guide in doing a top-end rebuild of my 1983 185S but have hit a stumbling block, hoping you can help. I have no spark (tried two new GY6/Chinese CDI's) but not sure what the problem is - I have done a video cranking it with multimeter readings hoping you can have a look at give me any suggestions?
ua-cam.com/video/8BWq2xkr4fo/v-deo.html