Thanks for the comparison. I have the yellow in my 64mm Injora (swamp kings?) on my FCX24 and the yellows are barely different than the stock foams when driving. I was surprised because the yellows seem much softer out of the tire than the foams. Maybe they’ll work better in a less chunky tire like the Injora “hyrax” style tire. Maybe I need better venting. Definitely needs some experimenting to get the most from the inserts.
Yes indeed bud i like the way the greens worked on my 64s i have the hyrax style tires i really like em alot gonna keep em in em for my trailing adventures
Did you notice any improvement in it's side hilling? They roll over much less when turning or side hilling than the stock and dual stage dj crawler foams in my dj crawler 64mm tires.
Yes i did the side hilling was alot better with the inserts imo the tires did not fold over at all compared to the foams i used on my fcx24 blazer during comparison definitely improved the side hilling issue with the foams
@@NWrcadventures I've had the same experience, but I had to add a little extra foam around the dj crawlers 64mm I have them so my results could have been off
@@keldonator i ran the green ones in my 64/24mm injora rock terrains those seem to work perfectly with the foams no need to add anymore reinforcement i just got a set of 64/24mm swamp claws that im running on my LC80 fcx18 o put in the yellow ones so ill see how they perform today when i make another video at the beach rocks but they feel good in the swamp claws definitely softer well see how they perform then 👍
I'm using the yellows in some dj crawler 64mm tires. The tire is too wide so I sliced a stock foam in half and stuffed that into the outside. Seems to be decent, much better than the optional dual stage foams you can get for them.
Yeah the inserts are for 24 mm wide tires so there would of definitely been a gap between the the insert and the sidewall thats a good easy way to solve the issue good work man 👍
Most definitely brother just remember to use 64 mm/24mm those are the best fit imo anything smaller with just compress them and they will be harder they will work but definitely stiffer you can go higher like 68 to 70mm and they should work fine 👍
Great comparison vid brother! Sure wish injora would've made a set of those that fit the 62x22mm. I run the same tires on my 4m Bronco as the ones you had on the ir40 during the test. I definitely need some inserts to help on the side hills.
Hopefully they will soon but for now your gonna have to run 64s on the bronco if you want to run those inserts unless you are able to find 62/24 mm tires your gonna have to go larger brother 🤟
Yes I hate how the tires fold over on side hills, I just got a set of yellow silicone inserts putting them in my new black label tires. But mostly I run the tires you got on the light blue blazer . Six sets of them they all have flubber stuffers none of them fold it over
Man thanks for your content man im new to RC i find it so helpful man!! I installed beadlock injora wheels and couple roof accessories on my Fms SCX18 lc80 with stock black Injora foams besides that my truck is stock but i feel the tires now are running way to squatted they work ok but i think they could be better What u recommend for my setup man What color injora inserts would u reccomend thanks in advance 🙏🏽
Id pick up the super soft yellow their very soft but also very firm with great sidewall support just remember that if you do get the yellow inserts you will need a 64mm/24mm tires thise are the best fit imo and wont be a pain in the butt to install on beadlocks 🤟
@@Senditjp247 these inserts are designed for 62 to 64 mm tires i have a set of the kings myself they are 62 mm tall by 22 mm wide and even tho the inserts will fit the tire is to narrow at 22 mm and its a real pain in the butt to install the beadlocks my friend the tire width just too narrow and the inserts separate the beadlocks covers too much and its just impossible to install so that why i recommend 64/ 24 s i recommend the injora swamp claws 64/24 or the injora rock terrains also 64/24 s those two work excellent with the inserts brother 🤟
@@NWrcadventures appreaciate u man i already got the Kings All terrains honestly i love then anything better u recommend instead of the stock foams that come with the Injora tires ?? Just need a little more harder currently when its really under stress tires looks completely di formed so since its to much of a work to install the silicone inserts anything u recommend for a little extra help ?? Thanks man I recently got into 1/10 got a ascent fusion man what a blast
The fusion is an awesome rig buddy you picked a good one there hehe as foams go wouldn't know exactly what would work for you the best thing you can do is if you have any other 1.0 inch tires pull the foams out and compare them to the stockies that come in the injora set and see if you can try them also their is i believe a proline 1.0 inch dual stage foam maybe give those a try you can find em in amazon just type proline 1.0 inch dual stage foams and you should find em
Thanks brother they are remarkably good for what they are i really liked em both i definitely recommend em to anyone wanting to try something different for bigger tires 🤟
Awesome Video man!! Quick question!!! For my Fms Fcx18 im Getting The Little Guy Racing Ghost wheels those weigh around 26G per wheel and are a size of 1.1" (28mm) Diameter And i will be pairing those with the injora All terrain Super S5 King Tires they have a size of 62x22 Besides that the truck will be stock for now! Witch Injora wheel inserts u think will work best the Yellow (Super soft) or the Green (Soft) Or u think the inserts not worth it and i should just leave the Stock Foams it comes with ??? Just curious what u think its gonna be my first actual RC build coming this week Would love your opinion???
Do not run 62/22 s if you want to run the inserts id recommend any 64/24 mm tire the inserts fit perfectly in that size if you try and put em in your 62/22 its gonna compress too much and its gonna be a real pain in the arse to lock the beadlocks buddy if you do run 62s id recommend 62/24 mm tires and id recommend the fcx18 lc80 anytime or the upcoming fcx18 chevy k10 imo i like the green inserts for an all around trail rig and id rin the yellows on a dedicated rock crawler but both are great and sidewall performance is much improved 🤟
@@NWrcadventures wow man thanks really puta things into perspective any good all around tires u reccomend over my ST s5 injoras any 62/24 tires u reccomend i can return my tires havent open opened the package directly from amazon jajah
@@NWrcadventures I was looking at these 2 INJORA 1.0 Tires - S5 Swamp Claw Mud Terrain Tires INJORA 1.0 Tires - S5 Rock Terrain Crawler Tires They are both same size 64/24
Double sides sticky tape the heavier duty type from 3M u can buy a nice big roll at home Depot i stuck both sand ladders together then added tape at the bottom of the lower one and stuck it really good and tight on the side of the rack on the lc80 🤟and its worked fine no coming off or nothing its holding up really good n tight ✌️
Is it a good idea to vent the sidewall? I ask bc i run beadlocks w brass wheels and silicone inserts. I think those block air on the top and bottom of the insert. Or should i just vent the tread of the tire?
@@DanhNguyenster64 i would believe so but if it doesn't then might work if you make a vent hole on the acual silicone insert before putting it in the tires as well 👍
Nice comparison.For myself i would choose super soft with a proper size tire.Thanks for doing this. 👍🏼
No problem woodie all for the love of rc and helping people decide what works for them it also fun doing these ✌️
Love how the blazer just push that big rock out of the way yeah 👍👍😁
Ohh yeah it just barreled right thru those rock with no care in the world brother
As always appreciate you sharing, great video dude. Love this stuff, I’ll be watching for the next one until then peace and chicken grease 😁👋👋😎
Thanks very much i appreciate it mr ritchey
Man I just love your testing grounds super cool 👍👍😎
Thanks brother yeah they are perfect for testing new things ✌️
Thanks for the comparison. I have the yellow in my 64mm Injora (swamp kings?) on my FCX24 and the yellows are barely different than the stock foams when driving. I was surprised because the yellows seem much softer out of the tire than the foams. Maybe they’ll work better in a less chunky tire like the Injora “hyrax” style tire. Maybe I need better venting. Definitely needs some experimenting to get the most from the inserts.
Yes indeed bud i like the way the greens worked on my 64s i have the hyrax style tires i really like em alot gonna keep em in em for my trailing adventures
Did you notice any improvement in it's side hilling? They roll over much less when turning or side hilling than the stock and dual stage dj crawler foams in my dj crawler 64mm tires.
Yes i did the side hilling was alot better with the inserts imo the tires did not fold over at all compared to the foams i used on my fcx24 blazer during comparison definitely improved the side hilling issue with the foams
@@NWrcadventures I've had the same experience, but I had to add a little extra foam around the dj crawlers 64mm I have them so my results could have been off
@@keldonator i ran the green ones in my 64/24mm injora rock terrains those seem to work perfectly with the foams no need to add anymore reinforcement i just got a set of 64/24mm swamp claws that im running on my LC80 fcx18 o put in the yellow ones so ill see how they perform today when i make another video at the beach rocks but they feel good in the swamp claws definitely softer well see how they perform then 👍
I'm using the yellows in some dj crawler 64mm tires. The tire is too wide so I sliced a stock foam in half and stuffed that into the outside. Seems to be decent, much better than the optional dual stage foams you can get for them.
Yeah the inserts are for 24 mm wide tires so there would of definitely been a gap between the the insert and the sidewall thats a good easy way to solve the issue good work man 👍
Cool insight. Might try these out!
Most definitely brother just remember to use 64 mm/24mm those are the best fit imo anything smaller with just compress them and they will be harder they will work but definitely stiffer you can go higher like 68 to 70mm and they should work fine 👍
Great comparison vid brother! Sure wish injora would've made a set of those that fit the 62x22mm. I run the same tires on my 4m Bronco as the ones you had on the ir40 during the test. I definitely need some inserts to help on the side hills.
Hopefully they will soon but for now your gonna have to run 64s on the bronco if you want to run those inserts unless you are able to find 62/24 mm tires your gonna have to go larger brother 🤟
Yes I hate how the tires fold over on side hills, I just got a set of yellow silicone inserts putting them in my new black label tires. But mostly I run the tires you got on the light blue blazer . Six sets of them they all have flubber stuffers none of them fold it over
Nice yeah these new INJORA silicone inserts are awesome they work excellent for side hills
Man thanks for your content man im new to RC i find it so helpful man!!
I installed beadlock injora wheels and couple roof accessories on my Fms SCX18 lc80 with stock black Injora foams besides that my truck is stock but i feel the tires now are running way to squatted they work ok but i think they could be better
What u recommend for my setup man
What color injora inserts would u reccomend thanks in advance
🙏🏽
Id pick up the super soft yellow their very soft but also very firm with great sidewall support just remember that if you do get the yellow inserts you will need a 64mm/24mm tires thise are the best fit imo and wont be a pain in the butt to install on beadlocks 🤟
@@NWrcadventures thanks man im running the Injora All terrain Kings ?
@@Senditjp247 these inserts are designed for 62 to 64 mm tires i have a set of the kings myself they are 62 mm tall by 22 mm wide and even tho the inserts will fit the tire is to narrow at 22 mm and its a real pain in the butt to install the beadlocks my friend the tire width just too narrow and the inserts separate the beadlocks covers too much and its just impossible to install so that why i recommend 64/ 24 s i recommend the injora swamp claws 64/24 or the injora rock terrains also 64/24 s those two work excellent with the inserts brother 🤟
@@NWrcadventures appreaciate u man i already got the Kings All terrains honestly i love then anything better u recommend instead of the stock foams that come with the Injora tires ??
Just need a little more harder currently when its really under stress tires looks completely di formed so since its to much of a work to install the silicone inserts anything u recommend for a little extra help ??
Thanks man I recently got into 1/10 got a ascent fusion man what a blast
The fusion is an awesome rig buddy you picked a good one there hehe as foams go wouldn't know exactly what would work for you the best thing you can do is if you have any other 1.0 inch tires pull the foams out and compare them to the stockies that come in the injora set and see if you can try them also their is i believe a proline 1.0 inch dual stage foam maybe give those a try you can find em in amazon just type proline 1.0 inch dual stage foams and you should find em
Nice inserts!
Thanks brother they are remarkably good for what they are i really liked em both i definitely recommend em to anyone wanting to try something different for bigger tires 🤟
Awesome Video man!!
Quick question!!! For my Fms Fcx18 im Getting The Little Guy Racing Ghost wheels those weigh around 26G per wheel and are a size of 1.1" (28mm) Diameter
And i will be pairing those with the injora All terrain Super S5 King Tires they have a size of 62x22
Besides that the truck will be stock for now!
Witch Injora wheel inserts u think will work best the Yellow (Super soft) or the Green (Soft)
Or u think the inserts not worth it and i should just leave the Stock Foams it comes with ???
Just curious what u think its gonna be my first actual RC build coming this week
Would love your opinion???
Do not run 62/22 s if you want to run the inserts id recommend any 64/24 mm tire the inserts fit perfectly in that size if you try and put em in your 62/22 its gonna compress too much and its gonna be a real pain in the arse to lock the beadlocks buddy if you do run 62s id recommend 62/24 mm tires and id recommend the fcx18 lc80 anytime or the upcoming fcx18 chevy k10 imo i like the green inserts for an all around trail rig and id rin the yellows on a dedicated rock crawler but both are great and sidewall performance is much improved 🤟
@@NWrcadventures wow man thanks really puta things into perspective any good all around tires u reccomend over my ST s5 injoras any 62/24 tires u reccomend i can return my tires havent open opened the package directly from amazon jajah
@@NWrcadventures
I was looking at these 2
INJORA 1.0 Tires - S5 Swamp Claw Mud Terrain Tires
INJORA 1.0 Tires - S5 Rock Terrain Crawler Tires
They are both same size 64/24
Do u think i will have to cut fenders or bumpers adding the bigger 64/24 tires
@@Senditjp247 no you dont have to trim the fenders on the lc80 they should work fine 👍
How did you mount those tire boards to the roof rack on the land cruiser? Its a nice look!
Double sides sticky tape the heavier duty type from 3M u can buy a nice big roll at home Depot i stuck both sand ladders together then added tape at the bottom of the lower one and stuck it really good and tight on the side of the rack on the lc80 🤟and its worked fine no coming off or nothing its holding up really good n tight ✌️
@@NWrcadventures Clever idea! I like it!
@@joehorecny7835 yes indeed and it works perfect no need to drill holes or tie anything up just a nice clean look 🤟
Is it a good idea to vent the sidewall? I ask bc i run beadlocks w brass wheels and silicone inserts. I think those block air on the top and bottom of the insert. Or should i just vent the tread of the tire?
Id probably vent the treads i wouldn't want to damage or possibly make the sidewalls weaker by cutting into them
@@NWrcadventures would they still vent since silicone blocks it?
@@DanhNguyenster64 i would believe so but if it doesn't then might work if you make a vent hole on the acual silicone insert before putting it in the tires as well 👍
@@NWrcadventures ill try it and update ya if the holes stay aligned or how it goes.
@@DanhNguyenster64 for sure thanks have a good night or day 🤟