Lifetime Tamarack Angler Sit-On-Top Kayak 10' - Stadium Seat Upgrade - The Fly Guy
Вставка
- Опубліковано 31 лип 2024
- This video is a quick update showcasing a stadium seat upgrade to my Lifetime Tamarack Angler Sit-On-Top Kayak. The seat and any other products I used on this mod are linked below. If this video helped you, hit the like button and if you haven't subscribed now would be a good time. I am going to be releasing videos regularly on kayaks, fly fishing, fly tying, gear, and more! Don't forget to hit the bell! Thanks for watching!
RELATED VIDEOS
New Yak 2019 - • Lifetime Tamarack Angl...
Kayak Mod Update - • Lifetime Tamarack Angl...
SOCIAL MEDIA
www.tfgflies.com/
Facebook - / tfgflies
TikTok - / the.fly.guy.tfgflies
Fishing Instagram - / theflyguyfishing
Photo Instagram - / mattcampbellpics
LinkedIn - www.linkedin.com/in/mattdcampbell
MOD SUPPLIES
Ozark Trail Stadium Seat - www.walmart.com/ip/Ozark-Trai...
Pad Eyes - amzn.to/2HAksoh
Pop Rivets 3/16" - amzn.to/2K21YhS
180 lb. Zip Ties - www.walmart.com/ip/Hyper-Toug...
Loctite Silicone - amzn.to/2M42IG5
Pool Noodle - www.dollartree.com/brightly-c...
Carabiner Clip - www.dollartree.com/tool-bench...
Canopy Ties - amzn.to/2WognvE
Gear Tray - www.dollartree.com/essentials...
#lifetimekayak #kayakflyfishing #theflyguy #kayakfishing #kayakmods #lifetimekayakmods #kayakmodsdiy #fishingkayakmods #kayakseatmod
The Fly Guy (tfgflies.com) is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Nice seat upgrade! I’ve been eyeing this kayak and watching modification videos. Yours is by far the best I’ve seen. Love your videos. Really informative! Thank you
Best seat install I’ve seen on this kayak on UA-cam period. Good stuff. I’m doing my seat the same exact way. Thanks
Going to do my seat this way in the same kayak. This seems to be the most practical, cost effective, and simple to install, and having the space under the seat with the catch all is the massive selling point. Good video.
A little FYI for you. Those zip ties are a great idea. However, with 44years as an aircraft mechanic/Inspector, my experience with zip ties is if they aren’t cut flush, they will cut you like a knife.
It’s funny I randomly ran across this comment. As an aircraft mechanic/inspector myself, I got 6 stitches 3 weeks ago from reaching back behind a panel that had a diagonally cut zip tie. Unfortunately behind a potty, cut right through my gloves.
Great idea. I am installing the same seat on my Wilderness Commander kayak for back support. Like the noodle on the back bar. Thanks for the video.
I JUST did this today on my yak because of this video. Super stoked to get out on the water now again. The one thing i did different though is i used the back to the old seat by tying the straps behind the back of the new seat and using a fat zip tie on the barrel portion at the bottom of the old seat back and connecting it to the rear cross member of the new seat. It's like a lazy boy. Don't tie that zip tie too tight though because the seat back won't fold down correctly if you zip it too tight. This video was awesome and I thank you so much for the idea
I am new to kayak fishing. I figured out real quick I needed a seat upgrade. I love the nice clean look on how you installed the seat. The nicest and cleanest video I’ve seen so far. 🎣
Thank you! I'm glad it helped!
Best seat upgrade install I've seen. Nice and clean, looks sturdy, bonus storage under the seat. Sweet!
@@theflyguytfgflies I totally copied this seat setup the other day. Picked up a similar seat at a different department store, but I mounted it exactly the same. Haven't got to test it yet, been a little too rainy up here in Oregon.
@@theflyguytfgflies got to go for a quick outing yesterday. I think I'll definitely need a longer paddle. The stock one was already on the short side, now with a taller seating position it's not really an option anymore! To be fair, I'm reasonably tall. It's a lot more comfortable though
This looked awesome so I gave it a shot. My seat was resting a bit higher, but used the same fastening method. I'm a bigger guy and maybe 3 minutes into the river on calm water, I got dumped! It's just too high for me to be stable. Looking for a skinnier seat that will fit lower in the yak. Great install tho!
Liked and Subscribed! Thanks for doing this video for me to do because I had the thought but didnt know how to go about do it. You are an awesome person.
Best installation video for this mod, no doubt!!! Thank you!!!
This is exactly the video i've been looking for. I've had this yak for 6 years or so and love it but have always had the same complaint after a day of fishing, and that's that my butt and back are so sore after sitting on plastic all day. Ordering all of this stuff now, thanks!
I have experienced the same! Hopefully the seat change will give you a better view and more comfort!
Thanks for the video, I have the same kayak. 2 summers ago I added a padded seat to my original seat. It was fine but I wanted something better this year. Yours was the first video I watched, as soon as you said the Ozark chair was $15 at Walmart I was hooked. Bought it today and installed it, even put a noodle on the back rail, looks just fine. Can't wait to try it out this weekend. I know for sure I'm going to love having my flat tackle box underneath the seat. No more reaching around blindly in the rear box, easier access to my knife and plyers.
How did yours do Joe?
I'm looking to do this to mine!!!
Thanks for the video. Just got my tamarack yesterday at walmart and will be going this route for the seat.
Thank you! This seat looks amazing I have done it years ago, my problem with it that it gives me back pain plus when its raised high like that the kayak wont be as stable as the original seat when its lower
best Video for this topic as others said. Will be doing this. Thanks for helping all of us!
I'll definitely be doing this seat mod. Thank's man!
Great idea. I bought the same seat for my kayak and trying to figure a way to bungee it but this might be the way to go. My only concern is interference with the handles. I have a medical issue with one foot and was trying to find a way to be able to take the seat off and on between fishing.
Very nice install buddy! Thanks for posting. I flipped and lost my previous stadium seat that everybody bought on Amazon. 😫 I'm definitely going to do this! Thank you!
@@theflyguytfgflies got my stadium seat in! Woohoo! Thanks dude! I got the 200 lbs zip ties that you recommended too and this sucker ain't going no where! I lifted the whole up kayak up from just the seat. Lol! If I may say, I kept the clips on the stock seat back straps on because it gives the stadium foot a little more plastic to sit on versus just the clip nubbin. This install allows two Plano boxes underneath! 👍Caution to those who want to do this though, you do sit way higher so stability is a concern for this particular kayak but I have outriggers/stabilizers so no worries for me. 😁
awesome quick and cheap mod. i will try this on my Teton.
I just finished doing the same with my yak,used that same seat from Walmart. However I found the seat back to be too upright...did not lean back enough,very uncomfortable. So I removed all the rivets at the "pivot" point and replaced with 3" bolts and nuts,using the existing holes. Now the seat leans back as far as I want. Used strong paracord on each side,tied paracord to the lean back,and other end to kayak straps/handle to stop the seat from leaning too far back,just the right angle. Adjust paracord to your comfort position.
I just bought my first kayak. The Lifetime Tioga Angler 100, which as I understand is the same thing as the Tamarack. Looks exactly like yours. My first trip I quickly realized that seat wasn't gonna cut it. I really dig how you upgraded your seat.
Thank you! Yeah the stock seat isn't great. They are both good yaks and the price is usually decent compared to other brands/models. Leaves you more money for mods!
I appreciate this very much. I thought I would try the $15 seat too. However was apprehensive until I found your post..... Ty
Tank you so much watched your video got the stuff and did it
..I have a different kayak(pelican bandit 80 and it still works
Great video for all of us on a budget.
Great idea and video
I am hoping to get this type of less costly kayak for my Tenkara fishing
Great work
Thank you SO MUCH!! THis is exactly what I was looking for!
Bad ass. I just bought this seat today. I have a pelican sentinel angler. I'll try it out in the am
Excellent detailed video, Thanks!
Awesome mod man I’m gonna give it a try
Looks solid ! I just got mines so kinda cringing over mods but it must happen
Very Nice upgrade.....I was lookn at yaks yesterday..... Won't be long.....
Have same Yak & chair - mounted mine a little different but same ideal. Next I’m mounting this chair on my sons . Tamerack Tohoma ( which is identical to my angler. Other than rear hatch & Rod holder. ) added our own rod holder
And was still cheaper in the end . Great video man
Do you have a video on how you rigged your seat?
I got that same seat a couple weeks ago. Sat in it and my back said Nope! I'll try the noodle . then see if I still wanna install it. I pondered some over how to mount it raised up like that. I have another old seat I had for a canoe that fits down in the seat depression. I may try it first. But thanks for the details on how to mount this one up like you did. Gives me another option. Thanks!
This is great. I have an angler and not a fan of the seat. No padding what so ever. Gonna give this a try.
How did it work out?
The detail in this is awesome. I’m not detail oriented and this was very helpful. Thanks!
Thanks for the mounting idea though man works great
Thanks for the great idea to use eye pads and zip ties to attach a replacement seat! Just did a similar thing with a Lifetime Kokanee tandem kayak (turning it into a single person kayak for my extra tall son-in-law.) Fingers crossed it holds up! What mattered most to me was the ability to remove the new kayak seat in the event other family members wish to turn it back into a tandem kayak with the original hard plastic back rests. The zip-ties make it easy to remove the new seat without removing the eye-pads.
You are welcome! Thank you. That's awesome! My originally installed seat is still going strong!
@@theflyguytfgflieswow that’s awesome! Enjoy!
Great idea I'm going today to get me one of those seats
Got this seat ready to install because of you! Just gotta get it installed before prespawn...
I had an idea for storage under the seat; basically making “shelves” under it that fit plastic storage containers. I think I could get 4 under there stacked 2 and 2.
Also plan to add extra padding to the seat, a storage bin like yours but on the side, and a cup holder that actually holds drinks!!!
The Fly Guy the stock cup holder is useless! Once I get it all done I’ll try to post a link of the pics
So the seat made my yak super unstable... I’m gonna have to make some outriggers or something
clean install! thanks!
Thanks for posting this! I have the same Yak and have been searching for the right seat. Your selection and install looks a lot more solid than the other stadium seat that seems to be the one most people use. Curious What size fly rod you typically use out of your kayak. I've made an outrigger system that utilizes the built in angled rod holders. Haven't had it in the water yet but hope to be able to stand and cast on lakes and ponds with it. Love your tying videos as well! Keep up the great videos...
I bought the Ozark Trail seat and the back bar can be a killer after a while even with the pool noodle.
Just ordered my seat and hardware. You sold me
I know this is an old video but one quick tip. Flush cut the ends of your wire ties with a razor knife or round them by heating with a lighter. Getting cut by a wire tie end sucks.
Great video. Wondering if you used screws or rivets for the pad eyes holding the seat. Thanks!
Great idea! How well are the pop rivets holding the seat down? Would screws be better to use?
Nice 🛶 and Chair!
How's it going my fellow I like your video I just purchased my tamarack kayak angler my question for you is what is the width on your seat that you have your setup is simple effective and a lot better then what I've seen on the on this I was really discouraged about the seating but your video gave me hope thanks
Finally an inexpensive way to have a elevated seat. I have the same kayak .
I’m adding a 6” sealed, torpedo shaped PVC tube with lead ballast and ability to store dry items in it but mount it under the kayak using the scupper holes and very strong bungee and a T bar to hold it in place the two runners molded into the bottom will provide structural rigidity needed.
Why? 1. This will add stability for open water fishing 2. This’s will increase my dry Bulk storage and overall payload. 3. This will act as a center beam and will improve straight movement.
4. I will build this in a two,part assembly so I can detach them and move them to the outside to increase stability in rough waters by adding beam width to the kayak.
The attachment or detachment method will be quick and simple they will not sink independently or assembled or create added weight and will not add to the load of the kayak
If a cross current is impeding my intended direction I will detach it and pull it or snug it up to the sides or; load it on either side of the kayak.
6” diameter pipe under the kayak should not hinder the propulsion through the water it should actually decrease drag as there will be slight lift on the hull.
The weight should decrease roll effect of waves. Waves might come in but they won’t roll the kayak. I might use this as a GOPRO mount as well.
Great vid, thanks
I throw a square pfd cushion on the backrest. Fits down behind the seat and provides comfort and available if needed.
It actually looks really good. How much more tippy did it make the kayak? Mine is a cheap 10 ft sundolphin bali and im thinking about doing something like this but its already not crazy stable im a little worried about raising the seat
This video was great! I modified my seat ..... Using this idea love it!
How did it work for you? Do you recommend it?
@@Free_Palestine_River2Sea live my seat. I would recommend the adaption. It sits you up a bit more which makes the balance a bit different but stable.
Nice video bro! I would like to know if raising the seat if it didn't lose some of the balance on the kayak?
The little tray you bought from dollar tree would be even better if you hot glued in a magnetic ruler to help hold your flys in and other metal objects.
What kind of screws did you use to install the pad eyes
great video
Does raising the center of gravity effect the stability of the kayak
Awesome! I bought a Tamarack today and made a crate and was looking for a seat modification, looks like I found it!!
Did you do the seat?
@@jedidias7091 I did. Made a HUGE Difference too. I also use a 2” really thick and comfortable pad to sit on, been on the water for 14 hours fishing with this setup!! 😎
@@bluegill2030 I have the seat just haven't mounted it bc was concerned if it rides to high or makes it to wobbly .
@@jedidias7091 it does but you up higher but it’s not bad, you get used to it pretty quick. As far as being tippy, just have to center yourself, it’s not bad at all, plus you now have storage under the seat. I keep 2 plastic containers under there, senkos and trailers and craws
I used this seat on my Tamarack 100 too however I mounted mine differently. I used 1 inch square aluminum tubing. I removed the foam seat cover as you did and mounted off the plastic seat to have better stability. I tried it mounted as you did but I didn't care for it. Not saying it was a bad mount, just saying that it wasn't for me. Also, my seat is about an inch higher and I made vinyl straps to attach it to the base I built as I carry my kayak on the roof of my Mazda3 and like removing the seat for transport. The nay sayers came out with all kinds of reasons why it was a bad idea to mount the seat in the way we did (at least they did on me) but I know these chairs and the way you mounted it is not a problem. I did find that the seat back was hard on my back (as I paddle a considerable distance). So my remedy for it is that since i mounted the seat up over the seat back strap braces (I hope that makes sense) I use the original seat back in conjunction with the stadium seat back. It provides me with a great lower lumbar support and I am able to lean back comfortably.
@@theflyguytfgflies We all have to go our own ways but if you're interested, I got the 1" x 1" aluminum at Home Depot. I would imagine you could order it on line for free pickup at the store or purchase it from another supplier. Also, I like the Kayak and I kinda chuckle when I hear the amount of money that others paid for their's just to go do the same thing I do at the same place I do it yet I'm there for less than a 3rd of what most of them spent. But hey, as I said, we all have to go our own way. Great sport, hope you get your line wet often and happy paddling!
@@dandydan2037 send me a picture of your setup please, my instagram is Jevvy_boss. thanks!
You gotta show how you tow it now... I’m quite confused on how you would tow it on top of your sedan or coupe. Would you have it facing upsidedown or laying up as it was in the water? Because if you put it on the top of your car with that kind of seat, would it evenly be weighted and not flop around while driving?
Hey do you feel like your kayak wobbles more in the water
Do you silicone or anything when you screw in the screws on the pateyes
That’s how I’m doing mine!
do you think plastic pop rivets would work also?
do you have to drill holes for those little mounted that the seat is zip tie too?
I did the same mod to my Tamarack. Only thing I found was it felt like I was going to tip over at the slightest movement. Mind you I am 6'2" and I know the center of gravity has moved. Did you find the same problem? Will have to try the pool noodle trick. I found the same problem with my back.
Get you a pipe bender and bend the top inch 45-75 degrees and tiny self tab the bottom backrest fabric to keep it there will be alot more comfertable
Does the seat sit up a little higher than the original seat to help fly fish better from the kayak.
Hi, I just got my new Kayak, never had in the water. What holes are you suppose to plug? i have 4 holes in bottom, I really like ur vedioes...joe
How is stability and paddling speed with the elevated seat vs stock ?
I have the exact same kayak and I absolutely hate the seat so I’m definitely going to be doing this probably tomorrow! I may have missed if you said it but did you just use screws to attach the padeyes or did you use a nut and bolt underneath?
Does this mod change the center of gravity? Make the boat feel tippy?
does the higher seat affect the stability of the kayak ?
Has it affected stability any sence it sits up higher?
Thank you going to try the seat Costco is selling now on my wife’s. I gust replaced mine with a kayak seat.
How are the seats working for you ? Which size did you get 17 or 20 . ? Compared to this stadium seat
Yes 👍
Dose the seat get in the way of the fishing rod holders
What type kayak is this . Like the idea
I bought that same seat. I put mine on in a less permanent way though. Also put rubber feet on the bottom of it and foam pipe insulation on the back. ( That bar on the back sucks.)
@@theflyguytfgflies yesterday i put 2 inch pvc under the front to make it lay back a little bit. I didn't like how it made me sit. I also tied the old butt pad to the back rest.
I bought the one with the arm rest bars because it doesn’t have a back bar so it’s nicer on the back
A suggestion; under the seat feet put Gorilla Tape to avoid chaff. Good job Matt 👍🏻🎣
The Fly Guy or buy Another noodle foam split it down the middle and place under seat legs
Yup put one in to kyack pcv tubing screwed in then just zip typed to pcv
Wat size screw for the eyepad?
I just bought this seat today and it only took 1 minute in the seat to know that upper bar on the backrest was going to be a deal breaker, the pool noodle idea will save me from returning it
This is the best Video and cleanest idea I’ve found and I’m planing to do the same to my yak! Can you tell me again what the three screw on fasteners down each side are called? I couldn’t make out what they are called when watching your video.
Thank you! Glad it helped you. Those are pad eyes secured with pop rivets.
so you keep the seat on while traveling in the car?
Isn't the center of balance drastically changed???
How are the pad eyes attached? Screws?
Did it change the stability of your kayak?
Hey great job!! Question, how was stability after seat install? I once added seats like this to my sit on top tandem, tried to keep them as close to the waterline as possible but wanted a little height for a better fishing view. Didn't throw the boat off balance drastically, but it was a little change in stability. Fine in lakes and still water but would no longer use in tidal or moving water. Just as a precaution as we have never dumped! (LOL) I have this same single kayak also and want to do the seat mod for tidal and moving water. Do you think it would be a convertible and stable fishing platform? Thanks
@@theflyguytfgflies wow, thank you :-)
As far as the pool noodle on the seat, back girls, I would have spent a tiny bit more to get a neoprene pipe insulation wrap that is black, and is more harmonious with the color of the seat. Otherwise a great job.
where do you get these seats ?
I'm interested in your kayak. How tall are you and how much do you weigh? It seems to work well for you.
How wide is the seat you bought?
Nice
Hey man, i am thinking about doing this with mine and was just curious how you feel the seat affects the stability? I would picture it making it a bit less stable but I can't tell if it would matter. I would love the under seat storage and the extra comfort haha.
I'm curious as well!
I love kayaking!
But want stability if I happen to get in rough water!
Good job on the mods! Question on the pool noodle backrest... Did you cut the noodle length wise and slip over the bar or what?
Thank you! Yes I did cut it length wise to slip over the bar.