@@deepalgor9913 You have to take a battery holder and connect terminals of battery holder in such a way to make it a series battery holder and then connect the positive of the battery pack to a switch and then from switch to positive of DC Jack and then negative of the battery pack to negative of the DC Jack. For reference, you can watch this part of my WIFI RC Car video where I have shown how to make a 2 cell series battery holder with switch.
bro, in ur videos, you directly connected battery with arduino boards right, then it should gives motor shield 5v input when they are stack together, so how does it drives 12 pump since the input voltage for relay board is from motor shield(5v as well)
@@UtGoTech okay so I just do the same as in your video, but I will add a voltage regulator to that 2 jumper wires instead of connecting them directly to the pump.
Bro I made these project these was working but now the project is the Bluetooth is connected but don’t working the function what is bro what to do😢 these is a nice project bro I want to present in school what well do
Bro ive completed the wiring as it is and code is done but when im turning it on , the water pump starts without stopping and if i connect the app it still doesn't work plz help
The name of the app is Bluetooth RC Controller and currently it is not available in the Play Store. I have a backup up whose link is given in the video description
Arduino Uno Motor Driver Shield 12 Volt Water Pump HC-05 Bluetooth Module 5 volt Single Channel Relay Board BO motors and wheels 18650 battery and holder
@@UtGoTech thanks for replaying me bro. Ive got LM2596 voltage ragulator on my hands. I just want to know how does 5v shield drives 12v pump with the relay board
@@UtGoTech i mean in ur videos, you directly connected battery with arduino boards right, then it should gives motor shield 5v input when they are stack together, so how does it drives 12 pump since the input voltage for relay board is from motor shield(5v as well)
Arduino DC Jack power is directly connected to the power of the motor shield. So if you take power from the power connector of the motor shield then you will get battery voltage.
Thanks a lot brother i can use it in my school exibition i have no words to say you thanku ❤
Welcome
hey, did it work?
@@seringmaLimbu yes its working project
Irhe bloothut module connect but car does not moving
This project selected for hackathon
Plese give solutions
Check battery voltage.
What type of battery are you using?
@UtGoTech the battery voltage is same
That problem face by using 2 channle relay
@@sadashivpokale7860 what problems you are facing? Give details.
@@UtGoTech i will contact you
The problem is blutooth conect but not move car by giving instructions
@@UtGoTech lithium-ion battery
Bro I am not getting battery holder with jack and switch 😢😢
You can make one for yourself by adding DC jack and a switch.
But how 🤔 😐
@@deepalgor9913 You have to take a battery holder and connect terminals of battery holder in such a way to make it a series battery holder and then connect the positive of the battery pack to a switch and then from switch to positive of DC Jack and then negative of the battery pack to negative of the DC Jack.
For reference, you can watch this part of my WIFI RC Car video where I have shown how to make a 2 cell series battery holder with switch.
Thanks bro 😊😊
@ Welcome Bro
And if we copy the same as you have done will it work properly?
Yes, if you follow the same then it will work.
where can i make the circuit block diagram on my own? which website or platform did you use to make your circuit diagram?
You can use fritzing
@ i purchased it online and downloaded it
But i am not able to find the components, like L298N, flame sensors
@ can i get your WhatsApp number?
@@UtGoTechcan i get your contact details so that i can share my queries over there
Contact me through Instagram
bro what is the software you used to design the circuit diagram
Fritzing
bro, in ur videos, you directly connected battery with arduino boards right, then it should gives motor shield 5v input when they are stack together, so how does it drives 12 pump since the input voltage for relay board is from motor shield(5v as well)
The relay board is only controlled through the Arduino board but the pump power is directly connected through the battery.
@@UtGoTech ohh i see I see thank you. So I am thinking i can actually get power for pump from a0 to a1 right, like the bluetooth module, it’s 5v
@Qenny-m4n That can damage or overheat the Arduino board
@@UtGoTech okay so I just do the same as in your video, but I will add a voltage regulator to that 2 jumper wires instead of connecting them directly to the pump.
Yes
Bro, where is Riley bored connected? Plz say
Sorry, for the mistake. Relay board is connected to pin A5.
You can follow the circuit diagram. Link given in the description.
drive.google.com/file/d/1j18LDOCyVMbz6v2emD3rPE3WKbM4d7q8/view?usp=sharing
Bro I made these project these was working but now the project is the Bluetooth is connected but don’t working the function what is bro what to do😢 these is a nice project bro I want to present in school what well do
First battery voltage should be checked. All the batteries must be Fully charged.
@@UtGoTech bro can we use 4 lithum iron battery
how to create that manual board u r controlling through phone
Sorry I didn't understand what you are asking about?
Hi bro, what is the name of the Bluetooth application that you used in your video?
Bluetooth RC Controller
do you have codes and diagram if i use l298 motor driver shield
No I don't have it for L298N project.
Nice work 👌👌👌👌
Thanks a lot 😊
Bro what is the issue that you have done of relay board
It doesn't have any issues. You have to turn off and turn on the pump through the relay board.
@UtGoTech yah but I wanted to know that where is the relay board connected with it isn't shown properly in the video kindly please help.
Arduino motor shield or motor driver is same?
Both can be different. The motor driver that can be mounted over the Arduino board is called as Arduino Motor Shield.
Sir i want to make this project can we connect sir also there is no code in the description can you guide us sir
Check description you will find the link
Yes you can contact me through Instagram
Bro Can it automatically detects the fire and extingu it with fire sensor?
No, it can't do it automatically. For that it needs modification
Bro ive completed the wiring as it is and code is done but when im turning it on , the water pump starts without stopping and if i connect the app it still doesn't work plz help
You have to use different contacts in the relay.
You can follow the circuit diagram. It has all the details.
Hello
Can you find it's solution
I am also having same issue
0:40 what are those red and orange wires?
You can use any wire you want.
The wire I have used is from the multicolour ribbon cable.
Does it work in daylight?
Yes, It has manual control.
Can you tell me the app? If the app is removed on Play store, any recommendation for another app.
Code is designed on the basis of this app so another app will not work for this project.
@@UtGoTech Can u tell me the app broooo
it’s arduino IDE
Bluetooth RC Controller
@@UtGoTech
OHH SORRY LOL I THOUGHT YOU MEANT THE CODE ONE 😭
Which of the blutooth app name ?
Bluetooth RC Controller
Bro whats the name of the Bluetooth app where can i find it
The name of the app is Bluetooth RC Controller and currently it is not available in the Play Store. I have a backup up whose link is given in the video description
Yah sure but still there no backup showing plz kindly do it cause I have to mu submit the project as soon as possible
Adafruit moter shield not find
Show v2 liberly
Search for "Adafruit Motor Shield V1 Library"
Bro something is shorting inside what we can do
Use proper connection
Hi
Where app Blotooh ??
App link is given in the video description.
We can use 2channle relay
Yes you can use 2 channel relay board
Can you give me code pls
Code is given in the video description.
Thank you brother ❤❤❤❤❤
@ Welcome
@ Most Welcome Brother
What logiciel you using?
Sorry I didn't understand what you were asking.
Can i upload this code using mobile with otg
Yes if you can install the necessary libraries then you can upload using mobile using otg.
Thanks for reply
Can you please give me the diameter of the water darm to connect to the water pump?
5mm
The code is not opening
Don't open the code in Google Drive, just download it and open it using Arduino IDE
Not opening
Don't open the code in Google Drive, just download it and open it using Arduino IDE
We can use 2 channle relat
Yes you can
@UtGoTech connection are same
@sadashivpokale7860 Yes, use one channel only.
@@UtGoTech ok thanks a lot😊😘
@@sadashivpokale7860 👍
What is name blotooh app ....??
Bluetooth RC Controller
Why is it no connection of Rx
No need for RX connection as we are sending commands only.
@UtGoTech can I have your Instagram
@UtGoTech hi sir I've sent you a message in IG
Ok
Hi can i get the Circuit Diagram for this robot?
I don't have it now. You can follow the connection as shown in the video.
hi, what’s the keyword of the nozzle blue map, I want to print one as well
I have made that nozzle. I will share the STL file.
@@UtGoTech i connect with everything and the pump and servo are working, but the motors are not working I don’t know why
Look for loose connections
How to connect tx rx pin of bluetooth module
RX TX will be connected to the servo signal pins.
Tq so much bro
Welcome Bro👍
My car connect but not move by app
What type of battery are you using?
@UtGoTech monster tyre wali 3 lithium battery
Monster truck
Have you checked the battery voltage?
@@UtGoTechno but very hight voltage and I couldn't connect relay
Why is the extra power input interface on shield is supplying output voltage to the water pump? I only have 5v water pump, how should I do?😂
You can use step down voltage regulator
circuit diagram??
Check description
drive.google.com/file/d/1j18LDOCyVMbz6v2emD3rPE3WKbM4d7q8/view?usp=sharing
Bro please give full code uplode vidio😢😢🥺🥺🥺
Uploading process is shown in the video
@UtGoTech you are very kind 😇🫡
But I can't understand
Can you give the steps how to upload file in Arduino app
It will be easier to use a PC or laptop to upload the code.
Code does not open
Don't open it in Google drive just download it and open it using Arduino IDE.
Ye work to karega na ye mera college project he😊😊😊😊😊😊
Yes it will work as shown in the video.
sir code is not showing please upload a new code because i will make this project 😢😢
Don't open it in Google drive, just download it and open it using arduino IDE
Not working bro
What issues are you facing?
Could you please elaborate on the issue you are facing?
Motors are rotating slowly. Sometimes the remote control works sometimes doesn't
Can you please provide me the diagram?
Check Video Description
drive.google.com/file/d/1j18LDOCyVMbz6v2emD3rPE3WKbM4d7q8/view?usp=sharing
Circuit diagram please
Check Video Description
drive.google.com/file/d/1j18LDOCyVMbz6v2emD3rPE3WKbM4d7q8/view?usp=sharing
@@UtGoTech I don't know what went wrong but it is not working so I created a whole new by my self
👍
Dear friend, thank you very much for your help!!! Please tell me what is the name of the android application?
Bluetooth RC Controller
Please give circuit diagram 😢😢😢😢
Check Video Description
drive.google.com/file/d/1j18LDOCyVMbz6v2emD3rPE3WKbM4d7q8/view?usp=sharing
Bro give circuit diagram I want to make
Check Video Description
drive.google.com/file/d/1j18LDOCyVMbz6v2emD3rPE3WKbM4d7q8/view?usp=sharing
Hot glue for a Fire Fighting Robot... I ask myself if that kind of hightech was used by india to fly to the moon? 😂
No this is just a project😊
Plzz give electric things name .😢
Arduino Uno
Motor Driver Shield
12 Volt Water Pump
HC-05 Bluetooth Module
5 volt Single Channel Relay Board
BO motors and wheels
18650 battery and holder
app name
Bluetooth RC Controller
Circuit diagram??
Planned to upload until then follow connections shown in the video.
Codes are fake
Codes are fake means..?
@@UtGoTech not upload in arduino
Have you installed the Adafruit motor Shield V1 library?
We can use 2 channle relat
Yes you can
Why is the extra power input interface on shield is supplying output voltage to the water pump? I only have 5v water pump, how should I do?😂
You can use step down voltage regulator
@@UtGoTech thanks for replaying me bro. Ive got LM2596 voltage ragulator on my hands. I just want to know how does 5v shield drives 12v pump with the relay board
Take input voltage directly from the battery and convert it to 5 volt then connect to the motor through the relay board.
@@UtGoTech i mean in ur videos, you directly connected battery with arduino boards right, then it should gives motor shield 5v input when they are stack together, so how does it drives 12 pump since the input voltage for relay board is from motor shield(5v as well)
Arduino DC Jack power is directly connected to the power of the motor shield. So if you take power from the power connector of the motor shield then you will get battery voltage.