Well no small engines shops around my area in Mississippi know how to even work on them. I have a useless IGX800 Pressure washer that no one knows how to fix. I’ve changed out the fuel pump, fuel filters, spark plugs, and now about to change out the coils. It loses power every time I go to high pressure and immediately fowls both spark plugs. 3-5 minutes into changing them out.
@@cdltestgenius. Hello. Was the rpm on the motor going up and down? That’s what happens with one but the pressure and performance has been fine. The motor just keeps running high and low. Gets annoying. Please let ne know
@@blueshieldpowerwashingfl it would barely idle. i bought coils online I have 5 of these machines. bought them all in the last 2-3 years. I had to change the coils on almost every unit. Buy the coils online and see. Part numbers. 30510-zdx-003 and 30520-zdx-003
I can't find information anywhere and figured I would ask y'all. I have a Honda IGX800 belt drive pressure washer. Is that engine supposed to automatically idle down when not under load? I completely removed the drive belt as a test, and it is still at full RPM at all times. I have seen videos where engine goes to idle when off trigger. Do you know what may be causing this? Thank you
Interesting…. Electronic governer. Can that read hrz. For a generator?… That would be a game changer!! Hopefully they got rid of those plastic gears! Larry
Love your work doing gas stations bro. You’re killing it! I’m a little guy (no pun intended) 5.5 gpm machine looking to upgrade to a more efficient machine. IGX 800 looks good.
By the "old" standard. (The one Briggs/Vanguard and Kohler still use) It's "28 Gross Horsepower" with an error of 5% allowed. Gross, means no air filter or restrictive exhaust attached. Honda later opted to use 24.9 "NET" horsepower, that is what you can expect to see as is. Now, if Vanguard would do the same. Their 810 28hp engine barely makes 24-25 in reality. Just like the Honda iGX800 actually advertises. The tattletale is in the fuel burn. By Briggs/Vanguards own admission, their claimed fuel burn comes out to maybe 18-20hp on the same engine. If you account for the fact 50% efficiency is nearly impossible in a lab, let alone with an air cooled industrial motor. Honda is a little sneaky too, their advertised fuel consumption is at a moderate load and full rpm. The European spec sheet shows fuel burn at full load and its much much higher (and believable, and also reasonably good BSFC for this type of motor).
$4,395.00 see here: www.jnequipment.com/shop/pressure-washing/pressure-washing-equipment/commercial-belt-drive/stealth-belt-drive/bandit-ultra-belt-drive-commercial-10-gpm-3500-psi-honda-igx800-pressure-washer-2/
I wonder if those are used in the Boats
Does Honda make the iGXV 800 for zero turn lawn mowers anymore?
How much are each??
Can thus be use for boat engine?
When come to Thailand?
How do you read codes on this
Have you fixed the bugs on the new igx 800?
I hear everyone is having tons of issues
Well no small engines shops around my area in Mississippi know how to even work on them. I have a useless IGX800 Pressure washer that no one knows how to fix. I’ve changed out the fuel pump, fuel filters, spark plugs, and now about to change out the coils. It loses power every time I go to high pressure and immediately fowls both spark plugs. 3-5 minutes into changing them out.
There is a known issue with the coils. Ive been through this for weeks changed the coils and it worked great
@@cdltestgenius. Hello. Was the rpm on the motor going up and down? That’s what happens with one but the pressure and performance has been fine. The motor just keeps running high and low. Gets annoying. Please let ne know
@@blueshieldpowerwashingfl it would barely idle. i bought coils online I have 5 of these machines. bought them all in the last 2-3 years. I had to change the coils on almost every unit. Buy the coils online and see. Part numbers. 30510-zdx-003 and 30520-zdx-003
@@blueshieldpowerwashingfl the rpm wasnt going up and down it was just misfiring severley.
How to order??
How much honda igx 800 in the philippines
its ok if we use in boat ?
how much is that engine in canada
I can't find information anywhere and figured I would ask y'all. I have a Honda IGX800 belt drive pressure washer. Is that engine supposed to automatically idle down when not under load? I completely removed the drive belt as a test, and it is still at full RPM at all times. I have seen videos where engine goes to idle when off trigger. Do you know what may be causing this? Thank you
Could this igx 800 could be installed on a marine boat? Tnx
Yes they use them on long tails. I have a predator 670
@@MrPland1992 fl camarado
Honda I GX 800 price Philippines
Interesting…. Electronic governer. Can that read hrz. For a generator?…
That would be a game changer!!
Hopefully they got rid of those plastic gears!
Larry
Gia bao nhiu vay
For a few of these
Love em
Love your work doing gas stations bro. You’re killing it! I’m a little guy (no pun intended) 5.5 gpm machine looking to upgrade to a more efficient machine. IGX 800 looks good.
Boa tarde como fasso pra comprar um desse modelo aí qual o valor alguém pode me ajudar?
Thumbnail said 28 HP. it’s not
By the "old" standard.
(The one Briggs/Vanguard and Kohler still use)
It's "28 Gross Horsepower" with an error of 5% allowed. Gross, means no air filter or restrictive exhaust attached.
Honda later opted to use 24.9 "NET" horsepower, that is what you can expect to see as is.
Now, if Vanguard would do the same. Their 810 28hp engine barely makes 24-25 in reality. Just like the Honda iGX800 actually advertises.
The tattletale is in the fuel burn. By Briggs/Vanguards own admission, their claimed fuel burn comes out to maybe 18-20hp on the same engine. If you account for the fact 50% efficiency is nearly impossible in a lab, let alone with an air cooled industrial motor.
Honda is a little sneaky too, their advertised fuel consumption is at a moderate load and full rpm. The European spec sheet shows fuel burn at full load and its much much higher (and believable, and also reasonably good BSFC for this type of motor).
how much sir?
$4,395.00 see here: www.jnequipment.com/shop/pressure-washing/pressure-washing-equipment/commercial-belt-drive/stealth-belt-drive/bandit-ultra-belt-drive-commercial-10-gpm-3500-psi-honda-igx800-pressure-washer-2/
@@1jfmurray Priced a little over two grand US here in Thailand
I just bought one for $3500 cash.
Where do I buy for mower 3500?
@@walkertongdee
Hi, can you please provide a link for Thailand purchase
Como puedo obtener el producto
How much ?
$2.50
800ราคาเท่าไรอยากได้
Honda was number one once, long ago 😢😢😢
ซือทีใหนราคาเท่าใรภาษาไทยหน่อย
Onde comprar
สนใจฟังไม่ร้,, ภาษาไทยได้ใหม
Would of been better if these engines have v-tec
Honda the best !! I have a 20 hp Kohler with almost 3200 hours on it though too
Greyson Throughway
Reynolds Plains
Nolan Manors
Koelpin Loop
John Cliff
Veum Station
Lourdes Parkways
Terry Fall
Hettinger Island
drain addict have this
Ritchie Passage
Hirthe Manors
Quiero para peru
Traduzca al español
Deborah Land
Vada Islands
Moen Dale
Madonna Oval
#drain addict#
How much honda igx 800 in the philippines