Engine won't start? Engine loses power? Fuel leaks? Disassemble the High Pressure pump.

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • Hello guys! Fuel pressure malfunctions in common rail systems!? It's time to test that pump, in case this one was really tired. A complete kit of gaskets and even a shaft had to be taken away. However it has done 300,000 kms and 22 years, it is now ready for so much more for sure! As you can see, the brand made the system in such a way that it is not necessary to remove the timing belt, thus saving a lot of labor time and also avoiding out of synchronism.
    This system fits all JTD, Mjet, JTDm, JTDm2 engines, for 1.6, 1.9 (8v and 16v), 2.0 and 2.4 (10v and 20v). In the case of the Stelvio and Giulia I suspect they must be identical as well.
    If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
    --------------------------------------------------------------------------------
    PayPal link to help my channel:
    www.paypal.me/...
    Support the channel via MBWay: (+351)913225320
    Patreon link to help my channel:
    / alfaromeonoproblem
    --------------------------------------------------------------------------------
    Common rail systems, how they work:
    • How to understand inje...
    How to replace the cam belt on 1.9 8V and 2.4 10V JTD engines:
    • JTD and Mjet 1.9 8V or...
    Hoe to remove and repair intake manifold on Mjet 16v and 20v engines:
    • How to disassemble, se...
    All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
    • Behind the scenes, Alf...
    Timing belts\chains How to:
    • Alfa Romeo 155 1.9td t...
    Alfa Romeo owners in need of help! I try to:
    • Car sold with warranty...
    Alfa Romeo Experts in Potugal (so far):
    • New series! Alfa Romeo...
    Ac Sytems, faults, solutions ans tips:
    • Stop charging the A/C ...
    Cooling systems, failure and maintenance:
    • Is the temperature gau...
    Ligth bulbs and ilumination:
    • Light fault system on,...
    Everyting suspension:
    • Broken alfa 75 suspens...
    Clutch engagement, DMFs, master and slave cylinders:
    • How to remove and re-u...
    Brakes, solutions and problems:
    • Big brakes!? Do you re...
    Power problems and solutions:
    • Mjet Injectors, how to...
    DPF and FAP problems and solutions:
    • DPF and FAP, do you re...
    Project Alfa 75\Milano:
    • Alfa Romeo 75, project...
    Alfa 33 1,7 16v complete restoration:
    • Alfa Romeo 33 1.7 16v ...
    Tutorial videos:
    • How does a starter mot...
    Quick tips:
    • Quick tips! Car don't ...
    Electrical issues:
    • How to test your fans?...
    Mjet\jtd engines, hard start or no start:
    • It's worse! But why? ...
    Vlog videos:
    • My Alfa Romeo 155 pres...
    Autel Diagnosis Machine:
    • How to SOLVE airbag li...
    Contact me:
    alfaromeonoproblem@gmail.com
    Where i do my research of parts: www.eper.fiatforum.com
    Where i buy OEM parts in PORTUGAL:
    JRParts www.jrparts.pt/
    Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
    (+351)244820770 lojaonline@jrparts.pt
    Where i buy all ORIGINAL parts in PORTUGAL:
    LizItalia www.lizitalia-... (+351)244 871 520
    Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
    Parts e-mail: vitorjoao.lizitalia@lizauto.pt
    Alfista salutations!
    #AlfaRomeo #alfa156 #AlfaRomeoNoProblem

КОМЕНТАРІ • 66

  • @Thronks_
    @Thronks_ 7 місяців тому +4

    You made real informative and high quality videos! Keep going! Forza Alfa!

  • @sashoiliev8946
    @sashoiliev8946 9 місяців тому +5

    Verry happy to find a channel where I could see content about alfa romeos and even better about the diesel versions. 👍🏼👍🏼

    • @alfaromeonoproblem
      @alfaromeonoproblem  9 місяців тому +2

      Hello, thanks for watching! A lot of diesel yes! Please share with your friends

    • @sashoiliev8946
      @sashoiliev8946 6 місяців тому +1

      I wanted to ask about the right drive shaft on my diesel 156. It has about 230bhp and I’m running the original drive shafts still on it. Recently I have some vibrations, tested it and there are vibrations only when accelerating. If you have any videos dedicated describing drive shaft problems, I’ll very grateful ☺️

    • @alfaromeonoproblem
      @alfaromeonoproblem  6 місяців тому

      @sashoiliev8946 hello. I do have one and another to come
      ua-cam.com/video/rrd9iegOJVA/v-deo.htmlsi=r-1zUnh-5LoCyJ2y

  • @franciscodelacruzserrano9679
    @franciscodelacruzserrano9679 9 місяців тому +4

    Great videos for the 156,keep doing more please and thanks

    • @alfaromeonoproblem
      @alfaromeonoproblem  9 місяців тому

      Thank you very much! A new one every Saturday at least until 2025

  • @4278-c6b
    @4278-c6b Рік тому +5

    Good morning Bruno your doing a difficult pain in the arse job💡

    • @alfaromeonoproblem
      @alfaromeonoproblem  Рік тому +2

      Hello. For what's to come on the channel, this is actually relaxing (for me)
      Thanks for watching

  • @DashCamSerbia
    @DashCamSerbia Рік тому +5

    The beggining reminds me of those drive/rant videos that you used to make. Too bad that you stopped making them.

    • @alfaromeonoproblem
      @alfaromeonoproblem  Рік тому +3

      Hello. Those vídeo wore never very good on views and quality. But that's not the reason I stopped making them.
      A new page on my live in so many ways as arrived. In one way I'm recording work every day and I have videos recorded and ready to go until April next year.
      Of course o will not repeat recording issues and problems that I did before, that will find me more time to resume some of the old content.
      Thank you for being here every time

  • @fikafikacu4564
    @fikafikacu4564 6 місяців тому +3

    The real pressure before and after the repair is identical.

    • @barukd
      @barukd Місяць тому

      I noticed too

  • @luigigargiulo5368
    @luigigargiulo5368 3 місяці тому +1

    Great video and nice 156 with Sport Pack and carbon dashboard

  • @DashCamSerbia
    @DashCamSerbia Рік тому +1

    I went to take a look at that 159 2.2 JTS, and it is the best example I have seen. There must be some hidden issues for sure, but never the less, I am buying it tomorrow (5.300 Еur). :D

  • @orgitokaca1456
    @orgitokaca1456 Рік тому +3

    hello, congratulations on the videos, I have a alfa romeo 156 1.9 jtd 16v, and the problem I'm having is the engine shaking when starting in first gear , shakes like craizy the engine mount seems to god ,, what it can be plz help me ...

    • @alfaromeonoproblem
      @alfaromeonoproblem  Рік тому +2

      Hello. It can be the bad and or wrong flywheel and clutch set assembly.

  • @artanshkembi8975
    @artanshkembi8975 Рік тому +1

    Hello. I love your work, its precise and very good illustrated. Iam fan of yours and thank to you i did get maganed to fix my car. I need help because i dont know what to do, my car has a high fuel consumption. I have a fiat bravo 1.9 16v diesel 150hp and avg fuel consumption is 6.8-8.3. Even a w203 merc 220cdi has it lower 6.2. If you help me id apriciate it. 🙏

    • @alfaromeonoproblem
      @alfaromeonoproblem  Рік тому +1

      Hello. Thanks for watching! Be very careful with the intake pipes and tubes. Check out the tube that goes between the air meter and the turbo .
      Also perform a diagnosis to see air quantity and pressure.

  • @Tolis-py2dc
    @Tolis-py2dc Рік тому +3

    You could film the disassembly of the pump,It can be your most watched video...Search about enlarging it with a different cam ;)

    • @DashCamSerbia
      @DashCamSerbia Рік тому +3

      Maybe he can do that with a broken/bad pump. No harm in that.

    • @Tolis-py2dc
      @Tolis-py2dc Рік тому +3

      @@DashCamSerbia Serbian brother you 're right.

    • @alfaromeonoproblem
      @alfaromeonoproblem  Рік тому +3

      Hello. I can do that, yes. I have a spare one here .

    • @DashCamSerbia
      @DashCamSerbia Рік тому +1

      @@alfaromeonoproblem Cool.

  • @sebnarcisi1514
    @sebnarcisi1514 2 місяці тому +1

    Hello I have a Alfa Romeo Giulietta 2011 Qv 1750 tbi
    I have an error code p1172 have you had this error code before?
    Thankyou so much
    Regards from Australia

    • @alfaromeonoproblem
      @alfaromeonoproblem  2 місяці тому

      Hello. I have never seen one of those here in Portugal, and for that never worked on one.
      But the codes are universal, that is a code for Oxygen sensor. Make sure the spark plugs are good and the engine timmed. If it's all good, check the cat converter and sensors

  • @ptrkwlgr8618
    @ptrkwlgr8618 4 місяці тому +1

    Sorry for dummy question, but what is the purpose of using the puller? I can’t figure it out…

    • @alfaromeonoproblem
      @alfaromeonoproblem  4 місяці тому

      Hello. It's very difficult to separate the pulley from the shaft without it.

    • @ptrkwlgr8618
      @ptrkwlgr8618 4 місяці тому +1

      Thanks for the answer. I have a problem with P0091&P0092 fault codes. I have already replaced the regulator and the sensor. Does it mean that the fuel pump is actually the reason of these codes, or is there anything else I could check? Thanks in advance!

    • @alfaromeonoproblem
      @alfaromeonoproblem  4 місяці тому

      @ptrkwlgr8618 hello. Most of the times is the pump.

  • @uetechgaming
    @uetechgaming 11 місяців тому +1

    Hi,i have problem with P0090. My car shuts down every time when step on throtle. But i tuned my 1.9 jtdm 120hp 8v its around 200+hp now. I want to raise pressure to 1800 bars. I put r80 pump from 2.4 alfa and rail sensor is 2000 bars. Everthing is setup nice on ECU map and problem is next... if i put 1700bars pressure car runs ok no problems but if put 1800 bars car is shut down around 1770 bars at 3700rpm and my fuel quantity at 75mg ( desired is 100mg). Duration map is with no smoke (we try with longer duration with alot of smoke at 1700 bars works fine... only when put 1800 bars cars shut down). I try another r80 pump same problem. Do you have some clue what can be? I also replase fule filter and 2 injector (276) corrections is under 1 (around 0.7).

    • @alfaromeonoproblem
      @alfaromeonoproblem  11 місяців тому +1

      Hello. Sorry, cannot help out. I do not deal with modified cars.

    • @luigigargiulo5368
      @luigigargiulo5368 3 місяці тому

      Do you run standard injectors?

    • @uetechgaming
      @uetechgaming 3 місяці тому +1

      @@luigigargiulo5368 Yes,i sloved the problem. It was problem in ecu map. (some safety shit)

  • @proxx4595
    @proxx4595 7 місяців тому +1

    Hi bro, good video
    Do you have also P0091 and P0092 code ?
    My alfa GT 1.9 JTD loss power, the pressure in the common rail dont cross 900bars when it need 1500bars. I have already replaced fuel pressure regulator, common rail pressure sensor. Do you think it can be the high pressure fuel pump ?

    • @alfaromeonoproblem
      @alfaromeonoproblem  7 місяців тому +1

      Hello. Yes, absolutely an internal issue with it. Send it to be tested and repaired. Do not use a used one

    • @eziozomparelli2079
      @eziozomparelli2079 6 місяців тому +2

      Did you get it repaired as I'm getting the same codes but the car acceleration is very good only goes in check engine light and limp mode take key starts fine and drives fine.

  • @neggo4290
    @neggo4290 2 місяці тому +1

    I recently changed my pump on my 147 and i cant get the diesel to reach the injectors

    • @alfaromeonoproblem
      @alfaromeonoproblem  2 місяці тому

      Hello. Do not try to open the pipes to get the air out. Just prime the system with the car key. Do you hear the bubbles?

    • @neggo4290
      @neggo4290 2 місяці тому +1

      @@alfaromeonoproblem yes I could hear the bubbles in my tank, but there is no diesel coming out of the pump at all, I'm trying to find what the issue is,might be that the pump was used and it came from a fused engine, but it should have been in working condition, also I primed a lot, could a discharged battery be the issue? It doesn't spin the engine as fast as a good battery does but with the old defective pump it used to start at least

    • @alfaromeonoproblem
      @alfaromeonoproblem  2 місяці тому

      @neggo4290 take a look
      ua-cam.com/video/XU80JQrHggs/v-deo.htmlsi=ysxII32DP6vjeFAN

  • @mohamedammar510
    @mohamedammar510 15 днів тому +1

    Bonjour j'avais un code erreur p091j'ai changé le filtre a gazoil et j ai effacé le code , problème disparu j ai pense que le filtre peut être le problème

  • @markoctavian1448
    @markoctavian1448 Місяць тому +1

    what to do if high pressure fuel pump doesn t want to come out ?

    • @alfaromeonoproblem
      @alfaromeonoproblem  Місяць тому

      A pry bar will do.

    • @markoctavian1448
      @markoctavian1448 Місяць тому +1

      @@alfaromeonoproblem don t come off , the pump itself moves but that s it, it s stuck on the other side

    • @alfaromeonoproblem
      @alfaromeonoproblem  Місяць тому

      @markoctavian1448 have you removed the pulley?

    • @markoctavian1448
      @markoctavian1448 Місяць тому +1

      @@alfaromeonoproblem yes, of course

    • @alfaromeonoproblem
      @alfaromeonoproblem  Місяць тому +1

      @markoctavian1448 all 3 nuts too? Go harder on the prying

  • @dabyd64
    @dabyd64 5 місяців тому +2

    This is likel caused by excessive injector backflow!

  • @DashCamSerbia
    @DashCamSerbia Рік тому +2

    So little views. YT now wants youtubers to pay for views, otherwise the videos don't get promoted.

    • @alfaromeonoproblem
      @alfaromeonoproblem  Рік тому +2

      Sometimes I wonder if I should go on ..

    • @DashCamSerbia
      @DashCamSerbia Рік тому +2

      @@alfaromeonoproblem :(

    • @sudnut
      @sudnut Рік тому +2

      Of course you should go on! You make unique Alfa content which is quite specialised. This may be part of the problem. Personally, and probably for most of your subscribers, this is exactly what we want, but to keep YT happy maybe you need to make content for a broader audience or about something that is trending, like electric cars 😔 for example. I don't know for sure, just wanted to give some suggestions but for me I think you do a great job.

    • @alfaromeonoproblem
      @alfaromeonoproblem  Рік тому +2

      Hello. You make good arguments. I just see similar channels doing this and much less. Including Alfa Romeo content, having massive growth.
      It's very tiring to do all this for 40 euros. Just.... Makes wonder if I should go on

    • @DashCamSerbia
      @DashCamSerbia Рік тому +1

      @@alfaromeonoproblem Your videos mean *a lot.* Especially since form tomorrow I will have my own 159. ;-)

  • @dabyd64
    @dabyd64 5 місяців тому

    This is likel caused by excessive injector backflow!