How to EXTEND your Golf Clubs at Home | Golf Club Repair
Вставка
- Опубліковано 15 вер 2024
- In this video I show you how you can easily extend your golf clubs at home with the minimal amount of tools, which will only cost you around £5 / $5. I go through each step of the process which will take around 5 minutes to do even for anyone that wouldn't even know where to start.
------------------
⛳️ What i used in this video;
🏌️♂️ White Spirit: amzn.to/3xIjlKj
🏌️♂️ Double Sided Tape:
amzn.to/3zJXd4h
🏌️♂️ Mini Shaft Cutter:
amzn.to/3xKlsgU
🏌️♂️ Double Sided Shaft extension for steel:
amzn.to/3zRWVrR
🏌️♂️ Golf Grip Cutting Tool:
amzn.to/3d5I3fJ
⛳️ What i use for all of my golf club repairs;
🏌️ Golf Grip Cutting Tool:
amzn.to/3d5I3fJ
🏌️ Golf Grip Remover Rod:
amzn.to/3zOZ8V6
🏌️ Double Sided Tape:
amzn.to/3zJXd4h
🏌️ Mini Hacksaw:
amzn.to/3d3WOQo
🏌️ 2 part epoxy glue:
amzn.to/2SkHnw1
🏌️ Mini Shaft Cutter:
amzn.to/3xKlsgU
🏌️ Double Sided Shaft extension for steel:
amzn.to/3zRWVrR
🏌️ Single Shaft extensions for graphite:
amzn.to/3xEiABS
🏌️ Full set of shaft extensions for graphite:
amzn.to/3d5ezPg
🏌️ White Spirit:
amzn.to/3xIjlKj
🏌️ Golf Gripping Solvent (Like white spirit but the proper stuff for regripping, a bit more expensive but it doesn't smell):
amzn.to/3zR9l3a
-------------------
📲 follow me on Instagram;
lukehanlongolf
------------------
📹 Related Videos;
🎯 How to re-grip your own golf clubs at home - • HOW to RE-GRIP a GOLF ...
🎯 How to remove the grip off your golf club without cutting it - • How to REMOVE your own...
🎯 How to shorten your own golf clubs at home - • How to CUT DOWN (short...
🎥 Related Playlist;
🚩 DIY Golf club repairs;
www.youtube.co....
-----------------
**Please note, i earn a tiny percentage of anything bought through the links in my description and that money will always be put back into making future content on my youtube video.
Thank you for your support on my channel 😎
Subscribe to play better golf 👀
#diygolfclubrepairs
Comes with a mixing stick.. doesn’t use mixing stick. Lol. Any epoxy outside of the insert is unnecessary, a cleaner result would be to not allow any epoxy to seep outside of the extension. You should lightly coat the epoxy inside the original shaft, you should scuff the extension with sandpaper(the part going inside the other club) and then apply some epoxy on the extension, taping it off at the line allows for a cleaner install. I’m not at all saying this way is wrong, but there’s a more effective way of doing it and I think the final product would be more reliable and closer to factory. Cool video either way, not sure how I ended up here. Cheers.
Luke this was epic thank you! Doing this tomorrow. I’ve been putting it off because I didn’t want to pay someone.
Good video. I'd suggest to rough up the outer part of the extension with a file, and the inside part of the shaft so that the epoxy has a better chance of a complete bond. Also mix the epoxy well before applying it.
This was dope! I feel like I just learned a valuable skill. Thank you man!
Good explanation, although I would let the extension dry/cure before putting the grip on, just to make sure it’s properly in place, and the epoxy mix hardened correctly.
Some advice - 1. fully mix the epoxy before applying it to the shaft. 2. rough up both surfaces so the shaft inside and extension for better adhesion. 3. Don't put the grip on until the epoxy cures. You can make sure the extension in the right place before you re-grip, but more importantly the solvent you use to add the grip can effect the epoxy ability to cure.
A great effortless video
Great video mate 👍
Thanks Luke! Very helpful stuff
Nice work. Thanks
Helpful mate 👍🏻👍🏻
Cool helpful vid, thanks Luke!
Thanks Luke.
thanks as well great content!
Thank you!
Cheers Luke, really helpful!
No worries 👍
Did you do a video on a snapped shaft repair , mine snapped clean at hosel?
Can I save an old ping man putter grip?
What if it is cracked?
Ive got an old shaft lying around👍
What able bend?? Needed if taller guys add 3/4
can you add 2" to a 52 degree wedge ?
Yeah wouldn’t be a problem 👍
That epoxy job was painful to watch
Take your negative comments elsewhere
Is it possible to remove extension s ?
Or do you just cut them off ?
Yeah just heat them up grip it with something and twist it out
@@LukeHanlonGolfok easy. thank you sir !
One inch will change the swing weight
You can buy counter balanced extensions.
Its' actually two inches he's added to the butt end. That'll change the swing weight a lot.
I hope he’s comfortable with his 5 iron because that’s how his new 7 iron is going to feel
Get on with it!
Ankle replacmennt