Lectric XP 2.0 Folding and Transport Tote Part 3
Вставка
- Опубліковано 3 сер 2024
- This is Part 3 of my review of the Lectric XP 2.0 ebike. This episode contains the modification of the Craftsman 50gal wheeled tote. Also how to fold the XP 2.0. Loading the ebike into the tote, vehicle and unload.
TIMESTAMP
00:00 Lectric XP 2 0 Fold and Transport Tote Part 3
00:35 50 Gal Tote Modification
01:59 Cutting Tote Top
03:12 Drill & Wire Tie
04:44 eBike Fold Process
06:11 Placing eBike in Tote
07:04 Load in Vehicle
07:47 Unload from Vehicle
08:42 Wrap-up & Findings - Розваги
Great video, thanks for sharing
Nice Job, suggestion place a piece of foam or blanket between the wheels when folded. This will prevent scratches on the frame from the wheel hub bolts. Ask me how I know …lol
Yes, I found that out the hard way also. 😅
Yes, we’ve used these bins since last fall and worked out great. Thank you for the acknowledgment in the video. ~ Ron & Judy
Thanks for your information.
Who knew you were so handy? Have fun with the new toy & ride safe.
Thanks Bruce
That was amazing Mr D -That was a great solution on so many levels-Thanks again Sir-can’t wait for more ✨🚴✨
Thanks Barry, getting ready for a State Park ride right now. Testing out my tote load and unload.
Thanks for your video. Very nice demonstration.
Invest in a folding “Load It” ramp from Erickson.
Also, try loading/unloading your bike with the tote tilted 90 degrees and resting up against something.
Wonderful!
Great video! Any ideas on a good way to cover the top half against rain? I'll be transporting mine in a pick-up truck. With these afternoon down-pours we get here in Florida I'd like to be able to protect them from the rain while driving back from the beach.
They sell several covers on Amazon just will have to find one that fits your bike. Mine is always folded in placed in my SUV. So I can’t really address your question. But I did do some searching in Amazon and there are several. Thanks for watching.
How tall is it in the bin? My car has a smaller back opening and I want to measure before buying.
Thanks for the instructive video.
About 27”
Do you have any idea how the front or back baskets that you can attach go on? I’m just wondering if I had one of those if I would have to take it off every time I put it into the tote and if it’s a big hassle to do so. Don’t have the bike or accessories yet. Just trying to plan ahead because I know I would want the extra accessories and I would have to transport in my car, also, what do you do to ensure that the battery doesn’t overheat when transporting or when charging
Very good video. Was your height measurement of 30” taken at the cables or seat/frame?
Seat frame
What is the height of the final assembly? Curious if it will fit under the tonneau cover of my truck.
Towards the end of the video, I believe the height indicates 30”
You do not need to lift at all, raise the tote Vertically and just slide the folded bike in, than slide the tote into your vehicle trunk by using foldable car dog ramp . No lifting at all vs. what this video shows you.
I agree, that’s how I do it now. Thanks for watching.
Will this size tote fit in a '21 Prius Prime?
I think going to a 60 or 70 gal tote would be your best bet.