'93 Mustang GT. Flowmaster Super 40s , X-pipe. Exhaust sound clip.
Вставка
- Опубліковано 27 лип 2017
- At this point I've owned the car for about 2 months. It's my first Mustang, and my first foxbody.
I'm in the process of sorting out the car, from multiple previous owners. One of the bits that needs finishing is the exhaust.
The car has Hooker long tube headers, X-pipe (can't tell which brand), Flowmaster Super 40 mufflers, and muffler shop tail pipes.
Before I install a set of 409S (stainless) GT tailpipes I wanted to have a sound comparison, of before and after. From what I've read, the sound may deepen just a bit, by removing the existing constricted pipes.
This is the before video.
Random update on the car, and some info on the exhaust:
I've taken everything apart and had the engine out, getting ready for a full Vortech V3 build. I also have a new H/C/I setup on the car and I'm about a month away from getting the car completed, tuned and on the road. I'll upload a video of the new build at some point and detail the major parts.
BUT! I'm sticking with the Super 40s for the new exhaust setup. It will be all new from the mid pipe back, but I really like the way these sound. Sticking with an Xpipe too.
I took the top end off, down to only the block and original rotating assembly.
I was able to figure out a few things based on some of the questions I've been asked here in the comments.
-Headers are actually OBX brand, they seem pretty solid despite likely being Ebay headers. The welds are good, and finish is nice. Not Hooker, like I was told.
-Xpipe was fabbed up at the muffler shop with a generic part. All of the bends were like the tail pipes, necked down.
- Mufflers, as known are Super 40s.
-The cam is the stock 93 Cobra cam. Part number, F3ZE-6250-CA
-E7TE heads spec'd to GT40 Cobra spec, with 1.7 Crane Ford factory roller rockers.
-The engine is a remanufactured 93 Cobra engine, so all internal parts are spec for that year.
Hopefully that answers most of your questions. Keep an eye out for a new video in the future!
My god. The hollow throaty 5L. I have tears on my eyes. Best sounding engine ever made. I miss my fox body.
Yeah, hollow🤣🤣
I prefer this sound of ANY of the new stangs
God, I miss that sound. That's the sound of my youth.
The 5.0 GTs still have the best V-8 sound
Sounds really good but I think the 4 valve Cobra sounds the best.. 2 valve sounds nice as well
The 5.2 voodoo from the gt350 sounds the best in my opinion
When I was a teen everyone had these with flowmasters and my z28 never sounded the same. Probably why I enjoyed hearing them so much
@@orbitcurve_227 nah.
@@hudboys8120 and 3v's
Sound that never gets old man. Sweet ride!
No car ever has sounded as wonderful as a Fox Body 5.0 with some Flowmasters. I wish the new 5.0’s could replicate that sound!
I went through UA-cam and seen a lot of videos and by far your sounds about the best
Thanks bud. A lot of the 302s I hear are deeper, and mine is definitely unique. I love it too.
Congrats on owning an American Classic!!!
she looks clean man...sounds just right!
beautiful looks and sounds
Love that car, love the shirt
Clean looking fox you got there! 👍👍👍
cruz_ Thanks brother, trying to improve it little by little, and make it the car it should be.
Super clean Fox
Classic sound like no other
Ive got those same headlights on my 87, beautiful car man.
Thanks bud. I've since swapped them out for the clears, and installed Cobra tail lights.
Awesome, classic sound👌
Damn....best sounding fox.
I had a 93 lightning with flowmasters. Had a 89 5.0 GT and a 93 LX 5.0 convertible with flowmasters. Can't beat that 5.0 sound!! Had those cars 20 years ago. I miss them now.
Hope you make more videos when it warms up. Subbed and liked. Car sounds sick
Burning Rubber Garage
Thanks man, but I promise low production quality. I'm not very good at this UA-cam thing.
pimpovic2 well I hope you make some.
Sounds like it should!!
I have 40's on mine but I really like the way these super 40's sound.
40s sound the best on a Foxbody, your car sounds amazing man…iam getting a pair this summer for my 88 vert
Dude don’t change a thing That thing sounds awesome I wish I never sold my Mustang
Found it 👍
I did have to change it for power reasons. The whole thing was constricted from the headers back.
Still used Super 40s with an X pipe though.
@@pimpovic2 Yeah I think I’m going to do a off-road H pipe with some Shorty headers and some 40 Flowmaster delta flow I don’t want all of that interior drone
@@mikemarks1834 Straight pipes drone less.
Just got mine done yesterday same layout
Finally got the new tailpipes on today. A real pain, but worth it.
The muffler shop setup didn't have the hangers or the mufflers in the correct locations.
I needed to cut, fit, repeat, and break out the welder. But, it's done.
The sound is deeper and uncorking the bottlenecks has released the power that was being robbed, it's a surprisingly noticeable difference.
Video will follow shortly...
Updated video?
I wanted to get one before the snow hit and that didn't work out. It's on my list of things to do, but may need to wait until the snow is gone.
pimpovic2 WHY WE GOTTA WAIT SO DAMN LONG BRO! Wtf
IMPERIAL SEMI KING Snow season in the Midwest.
I LOVE THE CAR BUT THE STRIPES NOT SO MUCH.
Amazing.
Sounds awesome, does it have any drone inside with windows up or down?
What X pipe are you running? Sounds perfect
Nathan Knapp Thank you. No labels or numbers that I can see. Considering the exhaust was done by an exhaust shop, I'm guessing it's a generic part. The mufflers seem to be the only name branded parts, from the header connection back.
Do you get much drone with those? Sounds great though.
As with any aftermarket exhaust, it's going to be louder inside than stock. That said, it's not too loud, boomy or annoying. It's comfortable enough to talk to the passenger, and the sound doesn't ever get annoying.
Sounds good. At least the previous owner(s) did not cut up the rear bumper for the tailpipes. What cam is that?
'93 Cobra Thanks. Not sure what cam, all I was told is that it's mild.
I put the car stuff on hold, too busy at work at the moment. Will investigate all of that when I get some more time.
Buy up all the foxes people, they tell getting more and more hard to find and valuable
Beautiful sexy car!😎👍
B303 1.7 rockers 1.⁵/8 longtube stainless headers to a 2.5 X pipe to 2chambet flowmasters with 3inch 90⁰ dumps.......then you have some foxbody sound tracks
So you're pretty much listing what your car has, and bragging about it?
insert drooling here...
😮😮😮😵😵🤯🤯nicccceeeee
Sounds WAAAYYYYYY better than a Coyote 5.0
Was there any modifications done did you put a camshaft
I was told there is a cam, but can't confirm.
Hooker long tube headers, x pipe, flowmaster super 40s.
Intake, larger throttle body, gt40 heads, bored to a 306.
I have a new B31 cam and vortech supercharger that will go in eventually.
pimpovic2 Hey thanks for the information that is a nice Mustang and it’s probably one of the best sounding ones on UA-cam I’ve seen yet lots of luck with it
Wanna hear that vortex b31 cam. Fox, make a new video I’m from canada as well looking for a lope cam for my tfs heads and tekaid mmr 4.75 stroker with a d1x
Check out the other video of this car, Winter Sounds. Has the B31 cam installed.
That sounds like a UPR O/R X pipe.
oK Im getting the 40s for my car I have SLP 1s on it now and its way to loud the 40s sound great
There are different 40s, just make sure you get the ones you mean to get.
That car has a cam?
IMPERIAL SEMI KING Yes it does have a cam, but was put on by one of the previous owners, and I don't have any record of what type it was. I was only told that it's not too aggressive.
What brand of x pipe do you have on your Foxbody?
Eyesoftheworld2029 Eyesoftheworld2029 Pretty sure it's a no name piece. I can't find a single indicator on it to give me an idea of what brand it might be.
pimpovic2 it sounds amazing though nasty as hell whatever brand pipe it is really sounds good on your Stang.
Thanks man. Funny enough when I first got the car, I'd never heard a 5.0 that had that high note, tuned sound to it. Sounded a lot like an Italian exotic. Those pinched tailpipes really gave it a unique sound, but they robbed it of power.
Headers are Hookers long tube, if that helps.
how do i get a loud idle?
Open headers
They sound like deeper 4.6s
This is when I discovered that they have the same firing order. Or at least similar.
Sounds like 1988!!
😮💨😮💨😮💨
What size piping?
2.5", except for the tailpipes. They're bigger now. Complete new setup but still Super 40s. Check out my other video in the winter.
No cats?
No cats
Compita que tal el motorsito 4
Is it a 302?
Yes, bored .030 over
Sounds just like the buggy from Half Life 2
is this catted or o/r ?
No cats.
Alternate title: Super quiet, no sound clip.
Check your sound settings.
@@pimpovic2 I meant it's too quiet.
@@pimpovic2 I did a muffler delete. It drones less than with the 40s.
Straight pipe & dumped all the way. Still nice tho!
Why can’t Ford make this sound in the new Mustangs lol
The new coyote 5.0 sounds like 🗑 compared to this.
people that use x-pipes with flowmasters should be sent to prison
People that can't hear how good they sound should keep their opinions to themselves.
@@pimpovic2 had the combo on my 95 gt about 10 years ago. Longtubes, upr X, 40s catback. Switched back to the H.