How to Install Through the Floor Sub Frame connectors on your 1979-2004 Mustang.
Вставка
- Опубліковано 24 лют 2020
- Measurements
Foxbody
Starting from the rear bulkhead behind the front seats
-Bulkhead to the center line of the fist kicker is set at 1-5/8"
-Bulkhead to the center line of the second kicker is set at 48-3/16"
SN
Starting from the rear bulkhead behind the front seats
-Bulkhead to the center line of the fist kicker is set at 2"
-Bulkhead to the center line of the second kicker is set at 48"
(These measurements are for the center line of the kicker to match the center line of the Team Z 8 point cage kit.)
Dave has set up around 1,000 ( yes we know that's not 5k :) rear suspensions for drag racers. Here he is going to share a little bit of his knowledge and experience with you.
Thanks for watching!
We love getting to share our knowledge with all of our customers from new racers to the highest level. Want to see more? Let us know what content you would like to see in the comments below.
Team Z Through the Floor Sub Frame connectors ►
www.teamzmotorsports.net/Throu...
Webstore ► www.teamzmotorsports.net
Follow us on social
Instagram ► / teamzmotorsportsofficial
Facebook ► / teamzmotorsports
Watch the more Team Z content here ► / @teamzmotorsports - Авто та транспорт
You can tell when people take pride in their work 👌🏾
Cars from TeamZ flat out WORK !
I love that cutting wheel of death on that angle grinder. I use them often.
Great detail and nice to see how the pros do it!
I feel much better doing the install in the future after watching this one a few times. I know who I’ll be calling when it’s time to buy 🤘🏻
Thank you!
I absolutely cannot belive you guys released this video. Are you going to do a video on how to weld the cage to the subframe connectors? My car is decked out in team z. Love the product. Love the tech. Thank you!!!!!
Thank you for choosing Team Z !
Watching these is only helping me map out a build.
Much appreciated boys
#americanmade
All of us in the Kinesthetic learner community thank you for this video. It makes all the difference in the world to see something done rather than just reading about it.
Awesome you guys are in the same town I live in...you've probably seen my car around town...I need to see you guys for some stuff for sure!
Love your parts wish y’all made 65-68 cages and connectors
This is absolutely the best through floor sub frame connector install video I have seen to date, and I have searched and viewed every clip on YT. Thank you, you have sold me on team Z. I'm just beginning my YT channel and drag car build, and I will be posting details on my YT channel, wich is also just in the beginning stages
I will have many questions. For instance, I assume you are not fully welding in the kickers so you can remove and drop down the 25.5 cage slightly and be able to tig the top welds (assuming you're using chromoly)?
Again, thanks very much I will be following this series closely.
I been waiting for this video. Team Z products are hands down quality parts and badass because they are truly functional.
when is the 25.5 going to be available? Thanks for the video
Wish you made a set for Fairmont/zephyr 😪
I’m wondering if you make this kit for a 69 mustang, love this design !
Do you have a seat bracket to use after these are installed to use factory seat mounts on floor? 2002 gt the mount for mustangs and kirky seats won’t work do to new frame rail.
When leveling the car where do you place the jacket ands? I know in the video you said to put them on the rockers but I don't see where I can do that on mine. My rockers may be messed up.
What is the number on that dewalt grinder? I wanna buy one lol
When will the 25.5 cage that matches the sfc be available
Hi what size wire did you use also the setting when welding the 6x6 plates onto the kickers
Do you guys have a kit or would make one for a Lincoln mark vii ?
Basically same but longer chassis.
I believe it’s the same as a fox body thunderbird.
I went online im in need of spindles for fox, but do u have stock height ones besides the 2 inch drop, i live in maine and our roads are as good as a trail in the woods
I hear it’s best to do these while motor m/trans are installed is that correct ?
Would it be overkill to run these and the under neath ones? Thanks
When is the 25.5 cage going to be available?
Do you make subframe connectors for 1977 mustang || ?
Are those measurements from bulk head to the kickers for fox and SN95 mustangs?
We updated the description to add the measurements for the SN.
Do you also need the subframe connectors under the car in conjunction with the they the floor connectors??
You do not. As you can see doing the through the floor subframe connectors is a process. Under the car subframe connectors are a little bit easier to install. Its all about the right tool for the job.
man i need these but not sure if id still fit in the car .anyone here tall and done this?
anyone have problems installing aftermarket seat brackets?
I'm going to order me up here for my figure eight car
Would these work in a 1985 4 door LTD as they come? Or would they need to be extended some?
The floor pan is the same.
Do these get in the way of using the clutch pedals
Hey Jayden, They do not get in the way of stock location pedals.
Part number pleace
What's a 25/5?
You now the strang masurment system they have in the US!:)
SFI Certification classification